Moriwaki master cylinder cap

I ordered these caps as an upgrade and to add a bit of style, my caps were as ever packaged and boxed to the highest standard,with only four screws holding these on both were fitted within minutes an easy upgrade for your cb13 View detail

For CB250F

Genuine product FuseF (10A)(MINI 98200-41000 About quality and texture genuine product Cost performance and comparison with other products Good value for money. About shipping and packaging Fast shipping and very good packaging. highly ercomended. View detail

I am satisfied

Low unit price and ScrewQuantity with Driver:2pc
It is good to be able to exchange easily.
Inexpensive foreign-made products may be poorly processed.
I have a lot of defective products and I don't want them to leak.
We chose MORIWAKI products, even if they are a little more expensive.
The look would have been better if it were made of Plating. View detail

Genuine Honda Oil Filter for CBR600F

Ok so it's just an oil filter. An oil filter that gets changed through out the bikes life. So, why bother buying really cheap aftermarket ones or the really expensive one when you know the genuine will work perfectly and give a great life span. The filter was easy to find, it also fits quite a few different models so is readily available. The price was really good, and still better than could source locally for the same Honda part. As I always have more than one part in each order, the cost of shipping is really good. I generally use EMS as it gets to me very quickly and the tracking is full, I mean FULL as in every step of the journey. I know exactly when the order will be delivered and apart from once, the delivery has always been on time. Every part in the order was well packaged as expected and the outer box was sealed on all sides so none of my smaller parts could escape.There is not really much to say about the finish of this oil filter as there is not really much you can see, The paint on the outer is really good and no runs or blemishes on it at all. The filter threaded on really easily and obviously, with any oil filter change, a small amount of oil on the end just to help seal.Fitted in no time at all and filled the oil in the engine. Runs really well and with the new oil, sounds a lot better than it did. Happy customer. Thank you Webike. View detail

Purchased due to Headlight Bulb running out

I purchased these because the bulbs were out. The Pine Stripe bulbs were as bright as I expected.

It's also inexpensive, so it's helpful. View detail

Is there a problem with being thinner than OEM?

I'm sorry I couldn't provide a photo, but when I used it on my NINJA2 Helmet 50RSL, I compared it with the OEM one, and the shaft part that holds the pad is clearly thinner,
The measurements were taken from the OEM, so they should be the same diameter." This was the case
I have a question for those who are familiar with Brake, is there any particular problem with the thin shaft part?
Has anyone who bought the same Stainless Steel Pad Pin had a similar case? I would like to hear your opinion. Thank you in advance. View detail

More rust-resistant than OEM Product

I used this for an overhaul of a very old OEM Caliper. The previous owner had maintained it to some extent and it was not so badly worn, but I wanted to assemble it in a new and clean condition if I was going to overhaul it. I chose it because I wanted to assemble it in a brand new and clean condition. View detail

It depends on how you run it.

With my current driving style, I was able to run 10,000 km per millimeter. Last time I installed the same pad, but the distance was half of this time because I was driving mainly on mountain passes and mountain roads. This time I drove mainly in town. View detail

Genuine Honda Rear Piston Seal Set for CB1000R 2011

These was a set of replacements for a broken piston seals for the CB1000R I have in the garage. I found that a few of the seals were not in great condition but these ones actually split and deteriorated. I purchased a set so I now have spares if any are still ok already on the bike. I found the correct part using the help pages and links that Webike provide. All with some other parts were shipped and delivered to my door in 5 days. These are small seals and do need a little care when being shipped. No problem at all for Webike, they put them in a nice bubblewrap envelope and were already on the Genuine Honda packet anyway. They were kept flat so there was no damage to the seals. As I already had the caliper apart for servicing, this set of seals were super easy to install. They arrived in perfect condition and had enough flex to be able to seat correctly. All back together and now that is one of the jobs completed. Thanks Webike, great work. View detail

Good cosmetics, old standby.

[How is it used?

It has been a standard consumable for a long time. I use this Filter every time.

How was your experience with it?

The quality is stable and reliable. I am satisfied with the quality of the product and have had no problems with it.

[Points to note]

Even if you use Filter wrench, you may choose to use Wrench because it is a Type without corners. I have never had a problem because I stick the Driver in and remove it.

How did it compare to other products?

It is comparable to the OEM Product, and I don't think there are any problems. There is no visible difference in performance, but it is a good consumable item for periodic replacement due to its good cost performance. View detail

Cost performance！

It is a normal oil filter, no oil leakage and comparable to OEM. Cost performance is good. View detail

Good Brake Pads

Very good Control. Durable and reliable. View detail

SBS Street pads fitting to GSX-R1000

Trying a different compound of these SBS pads. Not used this brand before and hope they are as good in certain situations as the Brembo street ones I have tried. Very good price. Easy to find. Shipping cost was good as I also had other brake pads in the same order. Everything in my order was perfect. These pads are clearly more street oriented as can be seen witht eh material on the brake pad. Very much cannot wait to try these. Also bought rear ones for same bike. View detail

Excellent choice, cheaper than OEM.

Gotta have oil filters, right? I like to change filters often but don't want to put a bunch of money into it if I can avoid it.Great filters. I learned about these when I had an older bike and found out they supply alot of oem and aftermarket oil filters. Same quality as oem and there cheaper. Why not buy directly from the manufacturer. Never had an issue running these. The inner screen has extra large holes and the metal is folded nicely. The rubber grommets fit tight on the filter's metal end caps and they fit tight around the pressure relief insert Mt09. I give it 5 stars plus These filters are a good value and have worked great for us. View detail

Rust-resistant Material from OEM:Replace with Stainless Steel!

OEM is prone to rust, so we replaced it with this product.
Cap is also included.
Material:I thought about Titanium, but it's too expensive Material:Stainless Steel
Quantity because Front is Double disk.:Buy 3 for 1 Set for 1 Vehicle.
The OEM cap can be removed with a slotted screwdriver.
This is very hard to loosen and almost nappy.
The attached Cap is a Hexagonal Wrench for peace of mind. View detail

It works goofily!

Used for front brake of XELVIS.
The No Brand pad that had been on the car up to that point was so ineffective that I had to throw it away, even though it was 8 parts high. In comparison, the brembo pads are very controllable, starting to work slowly in accordance with the lever-on force, and finally suppressing it with a strong force. I can now enjoy driving on mountain roads that I had been too scared to drive before.

The color of the Pad is bright Red. A sense of doing Good to get out. brembo's marking is written on the Pad and is clearly visible with a cantilevered Caliper. I have used OEM, Vesla, Red Pad, Golden Pad, etc., and this is the easiest pad to use without feeling insecure. The Fee Ring is similar to the Red Pad, but feels softer and tighter than the Red Pad.

The only thing that seems to be a drawback is the lifespan, which reaches its limit after about 5000 km. This is normal for a Pad, but for some reason the new Element was very thin (about 4mm?). The Pad with 40,000 km without replacement before the replacement had more left. If they made it thicker, it should have a longer life. View detail

Parenthesis OK

Simple and the texture was good. View detail

Ideal for the time being

I am pleased with the actual color against the color humidity, which is exactly what I expected. The luminous intensity is not as good as LEDs, but nighttime driving in the city with streetlights is not a problem. When entering Tunnel during the daytime, it is difficult to see where your car is illuminated. I think it is a good choice for inexpensive and temporary use. View detail

Rubber stand side cd125T

This rubber will use for protect silencer touching from side stand and main stand . Good quality rubber This is originally product from Honda. Made in Japan. View detail

CODE AxleBolt

Purchased this product because I replaced the front axle with a KOOD one.
The coolness, design, and texture are very good, but the price is rather expensive, which is a little disappointing.
However, only Black is Material:I am concerned about whether the plastic will crack due to deterioration.
Repair Parts would be nice View detail