Reviews
FOR CB250F
Genuine key, reasonable price, good packaging.very nice.Thanks to the webike team.good for the genuine buyers.highly recomended. View detail
FOR CB250F
I am happy to work with the webike team.Actually this item i could not found in my country (Mark, Drive Caution 87560MY1701). Finally I bought it from webike. It is genuine. Very good packaging.fast shipping. Thanks to the webike team. It has not been installed yet.good for the genuine buyers.highly recomended. View detail
Accuracy of holes is not very good.
I bought this for Repair because the Knee Slider part of my CBR900ROEMfootpeg was cracked.
The texture at a quick glance is the same as the OEM Product, but the accuracy of the holes in the footpeg may be poor, and there is a feeling of pinching when inserting the pin.
I couldn't push it in by hand, so I finally tapped it in with a plastic hammer. (OEM Product's Pin and Footpeg are Smooth in this area)
I drove for about an hour after assembly, and there is no particular discomfort.
View detail
Purchased wrong size
I bought the wrong size. I'm thinking of buying it again. View detail
Exchange to One point
We replaced the OEM with this Cap.
I replaced it for the first time and it is very good for one point around the engine.
I'm glad I replaced it
View detail
Fits and stable
I order new Honda OEM radiator cap with part number 19037-GEE-710 to replace for old radiator cap of Honda VFR 800 VTEC 2003. The old rubber that had aged is no longer closed, the new cap has fitted and stable. View detail
![Brake Pad - ROAD [SP] Compound](https://img.webike-cdn.net/catalogue/images/114748/Road-SP_TS.jpg)
Replaced at the same time as bremboDisc Rotor
Replaced together with bremboDisc Rotor.
It stops cleanly and has no control issues.
However, when you put it on, you can't tell it's brembo by its appearance.
View detail
I knew this was easy to use.
The fabric is thicker and has some stiffness compared to the Simple made by DAYTONA, which I bought last time, but I prefer this one because it feels more protective.
It is easier to have a belt sewn to the cover to prevent it from being rolled up.
The size is a little bit oversized around the rear, but I think the 3L size is good because it can wrap around the entire motorcycle.
View detail
Cost performance！
It is a normal oil filter, no oil leakage and comparable to OEM. Cost performance is good. View detail
A little short.
I selected it from the vehicle compatibility chart, but the Rear is covered well, but the Front is not covered enough. I can compromise because I use it in a covered parking lot, but it is hard to lock the chain lock. It was a little more.
The texture of the Cover is good. As mentioned above, it is roofed, so I don't think it will be water repellent or strong, but I think it will keep for a long time.
View detail
Purchased with Rear disk rotor
I bought it together with brembo's rear disk rotor when I purchased it.
I haven't installed it yet, but I have no complaints about the quality and appearance of the product.
I will make an impression when I install it again.
View detail
Very ordinary Oil Filter
It is very common, but there is a Merit that can remove foreign objects in the Engine because it contains Magnet.
I always choose with Magnet's Oil Filter because I think it is better to have it than not to have it.
View detail
Fits: HONDA CB600F HORNET, HONDA CB900 HORNET, HONDA CBF600, HONDA CBF600S, HONDA CBR1000RR, HONDA CBR600F, HONDA CBR600F Sports, HONDA CBR600F4i, HONDA CBR600RR, HONDA CBR900RR, HONDA NR750, HONDA VFR750F, HONDA VTR1000F FireStorm, HONDA XL1000V Varadero
good
thats is nice quality and light if you looking for sprocket this is your choose, and good service super fast delivery to other country. View detail
SUNSTARPremiumRacing disk rotor for cb400sf
[How is it used?
200 km traveled with it installed.
Was the one you received as per Image?
It was just like the Image and very cool!
Was the installation difficult?
Pitches, etc. are the same as CB, so just replace them.
How was your experience with it?
Braking power has increased considerably.
[Included Parts:were they on?
Included Parts:is only 2 brochures
[Was there anything that disappointed you?
nothing special
It was cooler than I expected.
I feel that Brake Pads wear out faster because of the slit for ejecting Brake dust.
View detail
SUNSTARPremiumRacing disk rotor for cb400sf
[How is it used?
200 km traveled with it installed.
Was the one you received as per Image?
It was just like the Image and very cool!
Was the installation difficult?
Pitches, etc. are the same as CB, so just replace them.
How was your experience with it?
Braking power has increased considerably.
[Included Parts:were they on?
Included Parts:is only 2 brochures
[Was there anything that disappointed you?
nothing special
It was cooler than I expected.
View detail
Review
This is a oem honda o ring for the thermostat housing, good quality part. Absolutely vital when you are changing your thermostat. View detail
Fits: SUZUKI KATANA, HONDA VTR1000F, HONDA VT400S, HONDA VT750S, HONDA DN-01, HONDA Integra, HONDA FUSION, HONDA Silver wingGT400, HONDA Silver wingGT600, HONDA CBR 650R, HONDA CBR 1000RR, HONDA CB 650R, HONDA CB 1000R, HONDA CB1300 SUPER FOUR, HONDA NC750X, HONDA NT1100, HONDA VFR800X, HONDA VRX Roadster, HONDA FORESIGHTEX, HONDA 400X
sv650 is 2L
I bought a L because the fit guarantee said L, but when I put it on, it was BitchBitch's tight-fitting.
It took a while but they accepted the return and repurchased the 2L.
Easy to detach and attach.
Rain does not soak through.
It certainly does not dissolve when attached immediately after an Engine stop.
Good
View detail
Titaniumium coatingInner Tube for vtr1000f
Buy cb400sf 41φFront fork to convert to Titaniumium coating
It is a little longer than the OEM fork of the cb400sf, but since all the internals are for the vtr1000f, I was able to install it without any problems.
I used SKF Seal like OHLINS and the movement was so much better that it was different!
I am not sure about the durability of the Coating yet, but I would like to Review the future use of the Coating.
View detail
Fits: SUZUKI KATANA, HONDA VTR1000F, HONDA VT400S, HONDA VT750S, HONDA DN-01, HONDA Integra, HONDA FUSION, HONDA Silver wingGT400, HONDA Silver wingGT600, HONDA CBR 650R, HONDA CBR 1000RR, HONDA CB 650R, HONDA CB 1000R, HONDA CB1300 SUPER FOUR, HONDA NC750X, HONDA NT1100, HONDA VFR800X, HONDA VRX Roadster, HONDA FORESIGHTEX, HONDA 400X
Ease of use is the best
Can be used immediately after returning from touring.
Easy to install and remove
I was looking for a product that satisfied the above two points and found one that looked just right, so I popped it in.
From the results, I'm really glad I bought it.
It is very easy to put on and take off, the cloth is firm, and I am very satisfied. It is a bit pricey, but if you think you can use it for a long time without Stress, it is rather cheap…?
I bought it when I bought a new Motorcycle, but I wish I had bought it sooner.
View detail
SBS Street pads fitting to GSX-R1000
Trying a different compound of these SBS pads. Not used this brand before and hope they are as good in certain situations as the Brembo street ones I have tried. Very good price. Easy to find. Shipping cost was good as I also had other brake pads in the same order. Everything in my order was perfect. These pads are clearly more street oriented as can be seen witht eh material on the brake pad. Very much cannot wait to try these. Also bought rear ones for same bike. View detail