Reviews
Good quality
This is used in honda hornet 250 footrest rubber.Genuine product. made in Japan. Made with good quality rubber material. View detail
Ideal for the time being
I am pleased with the actual color against the color humidity, which is exactly what I expected. The luminous intensity is not as good as LEDs, but nighttime driving in the city with streetlights is not a problem. When entering Tunnel during the daytime, it is difficult to see where your car is illuminated. I think it is a good choice for inexpensive and temporary use. View detail
Fit like a dedicated Cover!
[How is it used?
Used at home Garage
Was the one you received as per Image?
Almost as shown in the Image, but somewhat flimsy impression
How was your experience with it?
CinderellaFit, as if it were exclusive to CL250!
Size was perfect.
View detail
cheap
This is the second time I have purchased this product. Last time, the rubber broke after about 10 months of use. It is not durable. I think it depends on how you think because the unit price is cheap. I don't mind the hollow caps feeling while driving. View detail
Size was not suitable for CBR1000RR-R.
[How is it used?
It is used in a covered outdoor parking lot.
I am using it on a CBR1000RR-R, which is listed as a compatible model, but the size is too large.
I think it is also due to the fact that I am using Mirror in a folded state, but the excess part of the Cover contacts the ground quite a bit.
Due to the nature of the product, many people will use it outdoors, but the Cover will stick to the ground when it rains.
[Points to note]
If you are thinking of using it on CBR1000RR-R, we recommend you to buy 1Size or 2SizeSmallest one.
View detail
Rubber added to Change Pedal for off-road motorcycle
I have been riding motorcycles for almost 50 years and have ridden more than 20 motorcycles, but recently I bought my first 2nd off-road motorcycle by Ponhang. Change pedal is a cylindrical piece of steel, Brake pedal is made of GizaGiza steel, Kick pedal has no rubber. Kick pedal has no rubber. Everywhere you go, shoes get scratched, soles hurt, and Kick pedals slip if you're not careful. In addition, they only stick to the toes. I have never ridden a motorcycle with such a bad footing.
As I wondered why anyone would buy such a thing, it occurred to me that I had bought an off-road vehicle even though I had no intention of driving on mountain roads at all. When I bought a KS-2 a while ago, it was still cute, so I could forgive the similarities, but this KMX125 is bare of ironiness and cheap plastic here and there.
I bought this rubber because I thought it would be easy to fit a thicker cylindrical Change pedal to prevent the toes of Sneakers from getting scratched. I burned an iron rod to a bright red color and inserted it into a new Change rubber several times to make the hole larger.
I don't know how long it will last, but I think it will keep the toes of my shoes from being damaged. By the way, I have a better one installed on my Harley883 that wraps around with Magic tape. This one is Ponhang's, so I think this will be just fine.
View detail
decent product
I purchased it to mount on my Monkey 125. This is an item that makes your bike more luxurious.
Also, since it cannot be removed without tools, you can prepare for any unexpected situation.
Although it doesn't stand out that much, it is a dress-up item that makes the bike stand out.
Very satisfied. -------------------------------------------------- -------- I bought it to mount it in Monkey 125. It is an item that makes the bike more luxurious. You can also prepare for the situation because you can't solve it without a tool. It doesn't work like that, but it's a dress-up item that makes the bike stand out. I am very satisfied. Powered by Google Translator
View detail
Genuine product
This is Honda hornet 250 left site handle rubber. This will fit perfectly tightly to the handlebar. Made with good soft rubber. Jameen product made in Japan View detail
Replaced from ragged NORMAL
[How is it used?
In use in exchange for OEMFiller cap from SportsCUB
Was the one you received as per Image?
YES, cut-outs are very beautiful, anodized and even.
Was the installation difficult?
Easy to replace with OEM.
How was your experience with it?
No complaints as it's just for looks.
Level gauge becomes unusable and cannot be turned by hand. (You can turn it around if you try hard enough) Although there are some inconveniences such as
[Included Parts:were they on?
O-rings are included, so there is no need to prepare them separately.
[Was there anything that disappointed you?
None in particular
View detail
CODE AxleBolt
Purchased this product because I replaced the front axle with a KOOD one.
The coolness, design, and texture are very good, but the price is rather expensive, which is a little disappointing.
However, only Black is Material:I am concerned about whether the plastic will crack due to deterioration.
Repair Parts would be nice
View detail
Fits: HONDA CB1100, HONDA CBR650R, HONDA CBR650R, HONDA CBR650R, HONDA CBR650R, HONDA CRF1000, HONDA CRF1000, HONDA CRF1000, HONDA CRF1000, HONDA CRF1000, HONDA CRF1000, HONDA CRF1000, HONDA CRF1000A2, HONDA CRF1000A2, HONDA CRF1000D, HONDA CRF1000D, HONDA CRF1000D, HONDA CRF1000D, HONDA CRF1000D, HONDA CRF1000D
Brake service kit
super quality, genuine product.Made in Japan.perfectly Mach with repairing brake pump.Highly recommend for honada lovers View detail
Tour NSR
I installed it on my NSR as a DIY project.
We used it for 4 nights and 5 days touring from Kanagawa to Lake Biwa.
Unlike TouringBack, Large worked well in the rain!
View detail
Fits: HONDA CB1000SF, HONDA CB1300SB, HONDA CB1300SF, HONDA CB1300ST, HONDA VFR1200X, HONDA VFR800, HONDA VTR1000F, HONDA X-4, HONDA CBR600F4, HONDA CBR600F4I, HONDA CBR650R, HONDA CBR900RR, HONDA VTR, HONDA VFR800F, HONDA VFR800X, HONDA RVF400, HONDA NSR250R, HONDA HORNET900, HONDA HORNET600, HONDA HORNET250
Breaking Fee Ring has been improved.
I replaced OEM Product's Brake lever with this product.
The replacement process was completed in about 10 minutes.
I think it is not so difficult as long as you take care of grease up and tightening torque of the pivot bolt and nut.
The initial goal was Dress-up, but Breaking has improved considerably.
I can't find the right vocabulary, but what can I say, Brake works differently.
Fine tuning of the Brake's effectiveness has become much easier and more reassuring.
The shape of Lever must have been studied.
It was the right choice to replace it.
OEM Product will be kept onboard as Spare in case of emergency.
View detail
Fits: DUCATI 1299PANIGALE S, DUCATI 1299PANIGALE R, DUCATI 1299PANIGALE, DUCATI 1199PANIGALE R, DUCATI 1199PANIGALE S, DUCATI MONSTER1200S, DUCATI MONSTER1200, DUCATI MONSTER1100EVO, DUCATI HYPERMOTARD821, DUCATI HYPERMOTARD821 SP, DUCATI MONSTER696, DUCATI MONSTER796, YAMAHA TRICITY125, YAMAHA TRACER900, YAMAHA TMAX530SX, YAMAHA TMAX530DX, YAMAHA MT-09 TRACER, YAMAHA RZ50, YAMAHA TMAX530, YAMAHA R1-Z
Daytona oil cap
I'm used on honda hornet 250.Good look.perfectly fitted to the oil cap thread.There are small holes for water drain top of the cap.if you need open of close need to use alen key as a tool.recomended for bike enthusiast. View detail
Fits: DUCATI 1299PANIGALE S, DUCATI 1299PANIGALE R, DUCATI 1299PANIGALE, DUCATI 1199PANIGALE R, DUCATI 1199PANIGALE S, DUCATI MONSTER1200S, DUCATI MONSTER1200, DUCATI MONSTER1100EVO, DUCATI HYPERMOTARD821, DUCATI HYPERMOTARD821 SP, DUCATI MONSTER696, DUCATI MONSTER796, YAMAHA TRICITY125, YAMAHA TRACER900, YAMAHA TMAX530SX, YAMAHA TMAX530DX, YAMAHA MT-09 TRACER, YAMAHA RZ50, YAMAHA TMAX530, YAMAHA R1-Z
Good for protection
Installing it is a straightforward process, and it offers superior safeguarding compared to the original equipment manufacturer (OEM). This product is excellent for both tamper protection and customization, and it comes at a reasonable price. View detail
![Sport X Pad and Shoes [611742]](https://img.webike-cdn.net/catalogue/images/41584/612440_TS.jpg)
Fits: HONDA RVT1000R RC51, HONDA CBR954RRR, HONDA CBR929RR, HONDA CBR900RR, HONDA CBR600RR, HONDA CBR600F4, HONDA CBR600 SJR, HONDA CBR600 SE, HONDA CBR600 F3, HONDA CBR1000RR, HONDA CB1100, HONDA CB1000, SUZUKI GSX-S1000 ABS, SUZUKI GSX1250FA, SUZUKI SV1000S, SUZUKI SV650, SUZUKI SV650, YAMAHA FZ1, YAMAHA FZ-09, YAMAHA YZF-R1 LE
Genuine EBC Brake Pads for Yamaha FZ8 2012
This was a set for the FZ8 2012 of a customer who wanted to try the EBC brand for themselves. Although this is not a large powered bike, when it is on the track, you can virtually pin it all the way around a lot of the UK circuits. Finding the correct part was pretty easy as I visited EBC website and put my model details in. Webike had these in stock and so ordered with a few other parts. The shipping was fast and via EMS, delivered to me in 5 days. All was packed really well and did not move during transit, no damage at all. The pads came in their own EBC branded packet and arrived with no chips or any visual damage at all. The sintered material looks really coarse so no doubt they will stop the bike when needed. They were fitted really easily and without a hitch. After speaking to the bike owner a few days later, they confirmed they have a great initial bite with no ill effects. All in all, very pleased with these pads. I look forward to trying them on my own bikes. Thanks Webike. View detail
The best students everywhere.
[How is it used?
Distance:every 6,000 km (every 2 oil changes), a little earlier after circuit driving.
. I think I've replaced more than I can count on one hand.
Oil used is 0W-30 at the bottom and 15W-50 at the top. 10W-40 is basically used.
How was your experience with it?
Although we continue to use filters with Magnet, we could not feel the difference between them and filters without Magnet because we immediately throw them away when we replace them.
The same Filterenchi as the OEM could be used without modification, and there was no additional tooling to purchase.
The O-rings at the mounting points need to be lubricated with engine oil before installation, which is a more time-consuming process than OEM.
I have not checked the internal structure, but I don't think it is suspicious because there is no Engine trouble caused by Oil.
How did it compare to other products?
YAMAHA 5GH-13440-50 (https://www.webike.net/sd/25727395/):The price of this product seems to be higher than that of Image because of the magnet, but for some reason, this product is cheaper. As mentioned above, I think the O-ring came with Grease from the beginning.
K&N KN-204 (https://www.webike.net/sd/9396257/) or (https://www.webike.net/sd/19861663/):Less hassle than this product because it can be replaced without the need for a filter wrench. Magnet is also available only with this product. Price is even higher than OEM.
[Points to note]
I think it's only to apply oil to the O-ring. Since the OEM has been using it far more than the OEM, there is no particular Trouble with it.
It is a strange product that is priced lower than OEM despite having magnet, but it seems to have enough performance to catch the large portion of the R6 that has been running for almost 70,000km.
View detail
The activity is in a confined space and Circuit
[How is it used?
Five times, I think.
How was your experience with it?
Oil used is 10W-40.
Filter wrenchetc. can be attached and detached only with this product without tools. (A special tool is required to remove a filter other than the original one for the first time only.
Even Filterenchi felt it was very easy to attach and detach only the apex of the Filter for a vehicle with a Limit.
I've put it on and taken it off about 5 times, and there was never any trouble with the part where the tool hangs coming off.
How did it compare to other products?
・YAMAHA 5GH-13440-50 https://www.webike.net/sd/25727395/
This product does not have the ease of use that comes with Grease applied to the O-ring section from the beginning.
This product is easier to attach and detach because it requires a Filteren tool, etc.
・K&N KN-204：https://www.webike.net/sd/19861663/
The multicultural head family. it was good enough to buy the one in stock because it was thought that there was only a difference in the attachment of Sticker, but it had been sold out.
・KIJIMA 105-833：https://www.webike.net/sd/20386956/
Magnet is not in this product
Filteren tools are required.
Except for KN-204, the price of this productQuantity:2pc. The Set is equivalent to 3 competing products, which reduces the hassle, but is not Wallet-friendly. In addition to ease of replacement, ease of wiring is also a Merit of this product only.
[Points to note]
As mentioned above, if the original Filter is not this product, a special tool is required to remove it.
View detail
It's good because it lasts a long time and is hard to handle.
[How is it used?
It was installed on the front caliper and rear caliper of a YAMAHA TZr50R under restoration.
I thought the Pat Pin was rusty because it was an abandoned vehicle, but it was in beautiful condition thanks to this product.
Was the one you received as per Image?
We disassembled Caliper and cleaned it lightly, but it was clean enough to be usable as is.
Once again, it was a good price to purchase the product, so it was helpful. I like that it is durable as a product.
Was the installation difficult?
For those who can tinker with Caliper, I don't see any particular problem.
How was your experience with it?
I can't get a feel for the performance, but it seems to be fine.
[Included Parts:were they on?
nothing special
[Was there anything that disappointed you?
nothing special
View detail
At the time of Oh! SKF rather than OEM.
When Oh ??
I felt less Friction … and when I ran and looked at it, it was at about 80 km.
I felt that the road surface tracking was improved.
It's personal.
View detail