Reviews
Kitaco Belt variator
The delivery was successful, but the packaging was damaged, there was an incision on the package, but in general everything is fine. The CVT belt is hard of good quality and goes to the very top. I recommend View detail
Cool grips
I bought these beautiful grips again - this time to replace them with a Honda Super Cub.
The handles are of excellent quality and are not expensive and fit perfectly. The replacement took a little time.
I bought these beautiful handles again - now to replace them with a Honda Super Cub.
The handles are of excellent quality and are not expensive and fit perfectly. The replacement took a little time. -------------------------------------------------- -------- I bought these beautiful handles again - now to replace with Honda Super Cub. Handles of excellent quality and are not expensive and are perfect. The replacement took a little time. I BUGHT Th, Beautiful Handles AGain - Now To Replace them with a Honda Super Cub. The Handles are of Excellent Quality and ARE NOT Expensive and Fit Perfectly. The Replacement took a Little Time. Powered by Google Translator
View detail
Excellent pads
About quality and texture
The brake pads were chosen for Yamaha Vino; this brand has already been tested more than once in harsh urban braking conditions, so the choice immediately fell on them
The quality of the linings is high, they are dust-free, even after 5000 kilometers there is a minimum of brake dust in the drum
The glue is not visible, but there is enough of it, the sizing is very good
About the feeling of use
Operation on the next scooter showed its best side, braking is effective, even though it is a drum brake
With the correct cam setup, the brakes grab instantly and hold the wheel perfectly when pressed hard.
The average service life is about 10-15 thousand in urban conditions with frequent braking
Products to buy together
The kit includes everything you need, brake pads and springs
Difficulty of installation
Easy installation, you need to remove the muffler and rear wheel, then replace the pads
Cost performance and comparison with other products
Low cost compared to the original, and the braking quality is approximately 1.5 times higher
About shipping and packaging
Excellent blister packaging, no damage during delivery
Any concerns, cautions, or advice when purchasing
I can only recommend this product, already tested with three scooters ---------------------------------------- ------------------ About Quality and Texture The brake pads were chosen for Yamaha Vino, this brand has already been tested more than once in hard urban braking conditions, so the choice immediately fell on them The quality of the linings is high, they are unbearable, even after 5,000 kilometers in the drum minimum brake dust Glue is not visible, but it is enough, the gluing is very good ABOUT THE FEELING OF USE Operation on the next scooter showed itself from the best side, braking is effective, although it is a drum brake With proper tuning the fist, the brakes are grasped instantly and hold the wheel perfectly with a strong press The service life of an average of about 10-15 thousand with urban conditions with frequent braking Products to Buy Together The kit has everything you need, brake pads and springs Difficulty of Installation Light installation, it is necessary to remove the muffler and rear wheel, then replace the pads COST Performance and Comparison with Other Products Low cost compared to the original, and the quality of braking is about 1.5 times higher ABOUT SHIPPing and PACKAGING Great packaging in a blister, damage during delivery is not Any Concerns, Countions, or Advice When Purchasing I can only advise this product, already tested by three scooters Powered by Google Translator
View detail
Easy Pon-mount LEDs
It only takes about 15 minutes to install the LEDs, and it also reduces battery drain. View detail
White light!
The LED Bulb can be attached to the bulb, as the name suggests, and the cosmetics are good. View detail
Product # 25602
This time we needed grips for the "Suzuki Birdie". Once again, the grips from "Hunter" did not disappoint. Everything fits perfectly, the workmanship and material are top notch as always. I am very glad! View detail
Low cost Low Bright
To be honest, the brightness is not enough at all. However, if you want a LED light that shines white, this product is a good choice because of its low price and easy installation. If you need brightness for touring, this product is not reliable. It will be difficult to drive at night in places with poor street lighting, especially in bad weather. Especially in bad weather. But it is cheap! Easy installation is excellent. View detail
The LED light bulb brightness and projection angle
I bought two M&H Matsushima led headlight bulbs for my 2014 HONDA MSX125 and got them installed. The brightness is less than that of OEM bulb. Horizontal projection angle is not wide enough, so I got back to the OEM bulb. Sorry. I do not recommend this bulb and gives two stars for the overall rating. View detail
great greap
I liked these grips, they look like factory ones, they were delivered in 2 weeks, I’m very happy with the purchase, I will recommend them to friends ------------------------------ ---------------------------- I liked the vulture data, they looked like factory ones, delivered in 2 weeks, I am very pleased with the purchase, I will advise my friends Powered by Google Translator View detail
It is easy to install.
The white light of LEDs feels bright.
It will probably have a long lifespan, so it will be cost effective.
Replacement was the same as a normal Valve replacement.
View detail
Mini greap hunter
very good grips, similar to the factory ones, very soft, comfortable to hold, I really liked it, I will recommend it to my friends View detail
M&H Mazda StripeLED Bulb installed in Z125pro (last model)
[How is it used? Mostly city driving
Was the one you received as per Image? Yes.
Was the installation difficult? Quite easy.
How was your experience with it? The color of Light becomes White, and it is very good to brighten it up.
[Included Parts:were they on? None
[Was there anything that disappointed you? None
Point and hang of installation HEXBoltQuantity holding the head lampCover:Pair (for Left and Right) and loosen the Bolt under the Head lampCover to reach the Valve of the Light. Then, simply remove the cover, remove the bracket that holds the valve, and replace it. No modification is required.
It is better to use LEDs for the position lamps as well, since the overall color is whiter.
View detail
LED Headlight Bulb for Z125pro (last model)
[How is it used?
City Riding/Touring
Was the one you received as per Image?
Yes.
Was the installation difficult?
It's easy. No machining is required. All you need are ordinary tools.
How was your experience with it?
The light color is WHITE, brighter and very good. See photo for color difference.
[Included Parts:were they on?
None
[Was there anything that disappointed you?
None
Point and hang of installation
Head lampCoverQuantity with HEXWrench:Pair (for Left and Right) HEXBoltQuantity:Remove the 2pcs. and loosen the normal bolt that holds the bottom side of the Head lampCover. There is no problem to install the valve, such as the large size.
[ITEMS TO BUY TOGETHER
LED Position Lamp (T10Type)
The low price with a reliable Brand is sufficient to meet the demand for LED conversion.
View detail
Fits: HONDA Dunk, HONDA Sh mode, HONDA Giorno, HONDA BENLY50, HONDA CROSS CUB, HONDA BENLY50110, HONDA DIO110, HONDA glom, HONDA FORZASi, YAMAHA VOX, YAMAHA VOXDELUXE, YAMAHA VOXLIMITED, YAMAHA GEAR, YAMAHA NEWS GEAR, YAMAHA VINO, YAMAHA VINODX, YAMAHA VINOMolar feh, YAMAHA SDR, YAMAHA MAJESTY, YAMAHA MAJESTYC
Necessary and sufficient
Used on KLX125
High WattageHalogen bulb burns out after about 9,000 km, so we replaced it with PonLED.
Currently, the cost is higher than that of Halogen bulbs, as they can be used for more than 10,000 km.
Since the shape of the mold mouth is the same, the waterproof cover can be simply inserted, and it is as waterproof as OEM. Since it is a safety component, it is very important to ensure reliability when driving in the rain.
Although the overall length is about 1 cm longer, no interference or melting of the headlight cover has been observed.
Webike's Product Spec. The M&H Mazstripe Home page and Package only list the luminous flux as 6000k (Kelvin). Product Spec. I am not sure of the source of the information on the
Since it is more important whether the light intensity is high or low than whether the light color is White or Yellow, I would like to see Lm (Lumen) rather than K (Kelvin) indicated as the official manufacturer's information.
Physically, they feel that they are much brighter than regular Halogen bulbs.
The low beam illuminates too close when the high beam's optical axis is set slightly below the horizontal plane. It is difficult to decide where to set the illumination range. Also, the light distribution is H-shaped due to the heat sink at the tip of the valve. Another minus point is that the light axis easily jumps to oncoming cars.
Recommended for those who require ease of installation and reliability due to simple construction.
View detail
Fits: HONDA Forza300, HONDA CB500X, HONDA CBR500R, KTM RC390, KTM RC125, KTM RC250, KTM 690DUKE R, KTM 390DUKE, KTM 690DUKE, KTM 250DUKE, KTM 200DUKE, KTM 1290 SUPER DUKE R, KTM 125DUKE, KTM 1190 RC8, TRIUMPH Thruxton, TRIUMPH TIGER SPORT, TRIUMPH STREET TRIPLE R, TRIUMPH StreetTwin, TRIUMPH STREET TRIPLE 85, HONDA SHADOW SLASHER
Pretty good
Purchased to make effective use of the GIVI box, I installed it on the UniversalBase plate of Mono-lock and used it!
It can hold even small Rear Sets like Z250 very well.
I am also satisfied with the hold of the attached Belt.
View detail
Fits: YAMAHA YB-1, YAMAHA YB50, YAMAHA VOX (Box), YAMAHA VOX (Box), YAMAHA VOX (Box), YAMAHA VOX (Box), YAMAHA VOX (Box), YAMAHA VOX (Box), YAMAHA Virago (VIRAGO), YAMAHA Virago (VIRAGO), YAMAHA Virago (VIRAGO), YAMAHA Virago (VIRAGO), YAMAHA Virago (VIRAGO), YAMAHA Virago (VIRAGO), YAMAHA Virago (VIRAGO), YAMAHA Virago (VIRAGO), YAMAHA Virago (VIRAGO), YAMAHA Vino Molfe (VINO Molar feh), YAMAHA Vino Molfe (VINO Molar feh), YAMAHA VINO Molfe (VINO Molar feh)
It's solid
Used for VIRAGO
It worked well.
View detail
Fits: YAMAHA BJ50, YAMAHA BW'S, YAMAHA BW'S, YAMAHA JOG remote control, YAMAHA JOG remote control, YAMAHA JOG remote control, YAMAHA Mateseries, YAMAHA AXISTREET, YAMAHA VOX, YAMAHA VINOMolar feh, YAMAHA VINO(4-StrokeXC50), YAMAHA VINO(2-StokeYJ50R), YAMAHA MAJESTY125, YAMAHA JOGAPRIO, YAMAHA JOGPOSHE, YAMAHA JOG(4-StrokeCE50), YAMAHA JOG, YAMAHA GRANDAXIS100, YAMAHA GEAR(2-StokeBA50NH, YAMAHA GEAR(4-StrokeBX50)
It is easy to install. and it will protect you properly.
It is easy to install. View detail
Fits: HONDA CUB [Cub]., HONDA CUB [Cub]., HONDA CUB90 [Cub]., HONDA GROM [grom]., SUZUKI ADDRESSV100 [ADDRESS]., SUZUKI ADDRESSV125 [ADDRESS]., SUZUKI ADDRESSV125 [ADDRESS]., SUZUKI ADDRESSV125 [ADDRESS]., SUZUKI ADDRESSV125 [ADDRESS]., SUZUKI ADDRESSV125 [ADDRESS]., SUZUKI BIRDIE [Birdie]., SUZUKI Birdie 50, SUZUKI Birdie 50, YAMAHA GEAR [gear]., YAMAHA Town MATE90 [Mate]., YAMAHA News MATE [Mate]., YAMAHA News MATE80 [Mate]., YAMAHA News MATE90 [Mate]., SUZUKI DF125, HONDA APE100 [Ape].
Hunter grips as original
Hunter grips are like the original and even better and better than the original grips. The rubber itself is thicker, denser, and the price is very budget. I recommend to everyone, I will still take. -------------------------------------------------- -------- Hunter flips as an original and even better and better than the original grips. The rubber itself is thicker, denser, and the price is very budget. I recommend it to everyone, I will still take it. Powered by Google Translator View detail