Reviews
Feeling of security
I put it on '13MODEL Front 。 I was under the impression that the OEMPad was unstoppable. I replaced it with this Pad and went out for a test drive and the moment I grabbed the Brake lever. Oh, no!" I felt that it was a good idea.
I could feel the direct feeling when I held it, and I could decelerate as I wanted, which gave me a sense of security. I don't know about circuits because I don't ride them.
I don't know about durability as I just installed it, so I gave it a 3 star rating.
Front brake hose:APPerformance, Rear brake hose & pad:KAWASAKIOEM Spec. of the
View detail
It's good because it lasts a long time and is hard to handle.
[How is it used?
It was installed on the front caliper and rear caliper of a YAMAHA TZr50R under restoration.
I thought the Pat Pin was rusty because it was an abandoned vehicle, but it was in beautiful condition thanks to this product.
Was the one you received as per Image?
We disassembled Caliper and cleaned it lightly, but it was clean enough to be usable as is.
Once again, it was a good price to purchase the product, so it was helpful. I like that it is durable as a product.
Was the installation difficult?
For those who can tinker with Caliper, I don't see any particular problem.
How was your experience with it?
I can't get a feel for the performance, but it seems to be fine.
[Included Parts:were they on?
nothing special
[Was there anything that disappointed you?
nothing special
View detail
Is it a necessity if you want to Race?
[How is it used?
It was installed on the front master cylinder of a YAMAHA TZr50R under restoration.
It appears to be installed as Protection for Master Cylinder in case of tipping over.
Was the one you received as per Image?
I have an XJR with a Tank Separated Type radipon, so I did not know that this kind of product existed.
Was the installation difficult?
It's easy to change the OEM countersunk screws to hexagonal and install.
Master Cylinder's plate screws are easy to lick, so I would be grateful for a change to hexagonal.
How was your experience with it?
The previous owner had been playing Race and had solid fall scratches.
However, the Master Cylinder side was not affected, so it seems to be fulfilling its role well.
[Included Parts:were they on?
Hexagonal Screw
[Was there anything that disappointed you?
I think there are too few color options.
Color Anodized Aluminum looks cheap, so it would be better to have a more Large person color!
View detail
Sometimes it is more Large strange to remove an old OEMRubber.
[How is it used?
I purchased this product to do a little dress-up work on a long-abandoned LITTLE CUB after maintenance &restore had been completed.
Side StandRubber was installed in a high percentage of Honda cars in the 1980's and 1990's. Even when the ground was soft at the parking position, it was very useful because it was difficult for the stand to be buried.
The vehicle we acquired this time did not have any deterioration of Side StandRubber, but we changed Footpeg Rubber and Kick Pedal Rubber to Brown as well as Refresh, so Side StandRubber was also changed to Brown.
Did you receive the item as per the Image?
Since they are the same brand, both Footpeg Rubber and Kick Pedal Rubber are Brown, and I am self-satisfied with the color.
Was it difficult to install?
Less difficult, but the old Side StandRubber won't come off!
The mounting part was deformed, and the rubber was firmly wedged in the rubber due to rust, so it took a long time to come off, even though I sprayed oil spray all over it.
After removal, the deformation of the mounting area should be corrected, the rust prevention process should be performed, and then the mounting procedure should be reversed to complete the process.
Older vehicles or vehicles that were ... in storage conditions may have a hard time.
How did you like it?
The functional part of the product is the same as the OEM, and it does a good job of preventing the sinking of STAND.
The number one effect is. They're pretty to look at." It is a modest and unobtrusive part of the project, but it is highly self-satisfying.
Was "Included Parts:" attached?
Side StandRubber1pc. only.
Were there any disappointments?
As I mentioned above, it has the same effect as OEM and looks pretty enough to meet our expectations.
Other items that would be helpful
Point and hang of installation
As mentioned above, for some vehicles, removing the originally installed OEM parts can be a tedious process. 'A simple job to remove OEM Parts and install this product' It is
[Availability and clarity of the Instruction Manual
I don't think there was an Instruction Manual...?
Well, if you are buying this product, you know which Parts to replace, so I don't see any problem.
[Notes]
Depending on the condition of the STAND section of the vehicle, force may be required, so please be careful not to injure yourself.
[ITEMS TO BUY TOGETHER
Footpeg Rubber and Kick Pedal Rubber are also sold by the same KIJIMABrand, so it would be fun to enjoy color coordination.
Whether you want a unified look or dare to use RoseRose's colors, please fully demonstrate the buyer's Sense.
[Opinions and requests to Manufacturer
Please continue to sell the current Color line nap for many years to come.
View detail
XR100MOTARD
The Floating Disc has better design and braking power is definitely different.
The WaveRotor provides good heat dissipation, and the shape of the hole in the wall provides additional stopping power.
The braking force is completely different from that of NORMAL, so it is worth changing.
The mounting bolt should be replaced with a new one, and a screw lock should be attached with the specified torque!
View detail
Fits: YAMAHA JOG, HONDA monkey, HONDA Monkey Baja, HONDA Dio, HONDA CB500F, YAMAHA MINT, YAMAHA TZR50, YAMAHA TZR50R, YAMAHA TZM50R, YAMAHA JOG80, YAMAHA JOG-Z, YAMAHA JOG50 Sports, YAMAHA CHAMP80, YAMAHA CHAMP-RS50, YAMAHA CHAMP-CX, YAMAHA CHAMP, KAWASAKI KSR-II, YAMAHA ALLCHAMP, YAMAHA BWS, KAWASAKI KS-2
Cancellation.
I asked for it this morning and it is safely Cancelled. View detail
It's brighter than a white-hot bulb.
Installed on a Honda NSR80.
The NORMALWhite heat bulbs in the NSR80 were very dark, so we replaced them with LED bulbs to make nighttime driving somewhat safer.
If anything, it is not for the purpose of illuminating the road surface, I'm here, Appeal." I think it is highly satisfactory if you consider that LEDs for
In NSR80, the heat sink part of the Light case and LED Lamp is the contact limit. There is no problem.
View detail
long vowel mark (usually only used in katakana) (>ω<;)
Converted to my son's BALIUSA5, which had an air leak from the MASTER.
I thought about installing the Radial master, but I decided to go with the ZrX1200 DAEG because it is expected to be replaced by the ZrX1200 DAEG next year, so I decided to go with this one for cosmetic reasons.
Tank Separated Type is good for a different atmosphere. (? ・ ・?)
For the price, Touch was fine and a good buy!
However, it may be a little long for Mr. Balius in the standard lever….
It was sticking out of the handlebar, so I replaced it with a short lever. (Polish)
I should have measured the length before purchasing and selected the short lever type lol.
View detail
To Accent!
[Color] Clear coating is weak, and the anodized gilt peels off when tightened! View detail
self-satisfaction
One point Accent on Red Motorcycle! View detail
Fits: HONDA NSF100, HONDA SUPER CUBC125, HONDA SUPER CUBC125, HONDA DAX125, HONDA MONKEY125, HONDA MONKEY125, HONDA MONKEY125, HONDA glom, HONDA glom, HONDA glom, HONDA CROSSCUB110(FI Vehicles), HONDA CROSSCUB110(420Conversion), HONDA CROSSCUB110(420Conversion), HONDA SUPER CUB110-PRO(FI Vehicles), HONDA SUPER CUB110PRO, HONDA SUPER CUB110(FI Vehicles), HONDA SUPER CUB110(420Conversion), HONDA SUPER CUB110(420Conversion), HONDA SUPER CUB110, HONDA APE 100
Thanks!
I chose the existing small sprocket while trying to change it by changing the chain. I'm very satisfied because it seems to deliver the speed well. View detail
Fits: HONDA CB125, HONDA CBX125, HONDA DJ-1, HONDA gyro canopy, HONDA TLR200, HONDA Super Cub 50, HONDA Lead 50, HONDA Lead 90, PGO MyBuBu125, SUZUKI K90, SUZUKI street magic, SUZUKI birdie, SYM fighter150, YAMAHA Cygnus, YAMAHA Cygnus, YAMAHA jog, YAMAHA jog sports, HONDA CBR125, KYMCO SOONER100, HONDA WAVE125
Product # 1P2004
One of my friends has a rare YAMAHA Town Mate 6 volt motorcycle. He was faced with the problem of finding incandescent headlamps. We are very lucky that this product is available in the webike. The workmanship is good. Great price. View detail
Fits: Others , YAMAHA YZ250, YAMAHA YB50, YAMAHA RZ50, YAMAHA MINT, YAMAHA GRANDAXIS , YAMAHA EXCEL, YAMAHA DT50, YAMAHA DT230 LANZA, YAMAHA AXIS90, YAMAHA AXIS50, SUZUKI STREETMAGIC110 , SUZUKI RMX250, SUZUKI RMX250, SUZUKI RMX250 S, SUZUKI RM250, SUZUKI RG200 γ, SUZUKI ADDRESSV100 , SUZUKI ADDRESS 110, ROYAL ENFIELD BULLET 350
I bought it for the first time in 20 years.
Installed on YAMAHABirdCity
Ignition coil is AS Uotani
Plug is NGK's Standard Type
I thought it would be easier to see the difference with Small Engine Displacement Volume.
It's a Scooter, so you can't see it from the outside at all, but it's a world of self-satisfaction, so no problem.
View detail
Fits: HONDA XR50 Motard, HONDA APE 100 TypeD, HONDA APE TypeD, HONDA XR100MOTARD, HONDA NSR mini, HONDA NSR80, HONDA NSR50, HONDA NSF100, HONDA NS50R, HONDA NS50F, HONDA NS-1
good
good View detail
Fits: HONDA ZOOMERX, HONDA APE 50, HONDA APE 50, HONDA APE 100 TypeD, HONDA APE 100, HONDA APE TypeD, HONDA XR50 MOTARD, HONDA XR100MOTARD, HONDA NSR mini, HONDA NSR80, HONDA NSR50, HONDA NSF100, HONDA NS-1
Complete self-satisfaction
I installed it on my MONKEY. It is completely self-made. First of all, you can't usually see it, people won't notice it, and probably the light weight is effective... (It's under Spring.) If it were Racer, it might be different. View detail
Fits: YAMAHA Cygnus X SR, YAMAHA XT660X, YAMAHA TZR50, YAMAHA TT250R Raid, YAMAHA RZ125, SUZUKI volty, SUZUKI cobra, SUZUKI Across, SUZUKI VX800, SUZUKI TS200R, SUZUKI TS125R, SUZUKI SV400, SUZUKI RMX250S, SUZUKI RMX250, SUZUKI RG200, SUZUKI GSX250S Katana, SUZUKI GS400E, SUZUKI GS125E Katana, SUZUKI GS125, SUZUKI DR250S
Great!
Replaced an OEM Master Cylinder with a BALIUSA5 that developed an air leak.
The color is Black×Black.
I was relieved to find that the front brake, which does not bite the air, was properly connected to the Snap. (? ・ ・?)
The only problem I have with this vehicle is ….
The tank is placed too close to the HandlebarCenter and may be covered by the Tachometer.
Well, I can just buy a Bracket at Home center and move it to a new location, lol.
I have a shabby blog, if you are interested! (^_^;)
https://enjoy-motorcycle.blog.jp/
View detail
Fits: DUCATI 1299PANIGALE S, DUCATI 1299PANIGALE R, DUCATI 1299PANIGALE, DUCATI 1199PANIGALE R, DUCATI 1199PANIGALE S, DUCATI MONSTER1200S, DUCATI MONSTER1200, DUCATI MONSTER1100EVO, DUCATI HYPERMOTARD821, DUCATI HYPERMOTARD821 SP, DUCATI MONSTER696, DUCATI MONSTER796, YAMAHA TRICITY125, YAMAHA TRACER900, YAMAHA TMAX530SX, YAMAHA TMAX530DX, YAMAHA MT-09 TRACER, YAMAHA RZ50, YAMAHA TMAX530, YAMAHA R1-Z
oil cap
The genuine oil cap is easy to open and close, but it seems like it could be a good choice in case of an unsuspecting terrorist attack. Furthermore, the aluminum and design are great. It could be a water reservoir. I don't know if it's an outlet or a sealing hole, but it will fly away in the wind. The color is black. I tried to choose it, but it was out of stock, so I went with the green color that was in stock as a last resort in case the delivery would be delayed, but when I saw it in person, I really liked it. It was not a bright green, but a dark and somewhat heavy color. Green color recommended. My car is not in the CL500 category --- -------------------------------------------------- ----- The pure oil cap is easy to open and close, but it can be a good choice for terrorism, but it is also excellent for design and design. I tried to choose to choose, but I didn't have stock, so I was so delivered to the green color with a stock. I liked the real thing. Powered by Google Translator View detail
Fits: DUCATI 1199PANIGALE, DUCATI 1199PANIGALE R, DUCATI 1199PANIGALE S, DUCATI 1299PANIGALE, DUCATI 1299PANIGALE R, DUCATI 1299PANIGALE S, DUCATI 848, DUCATI 848 EVO, DUCATI 899PANIGALE, DUCATI 959PANIGALE, DUCATI DIAVEL, DUCATI HYPERMOTARD796, DUCATI HYPERMOTARD821, DUCATI HYPERMOTARD821 SP, DUCATI MONSTER1100EVO, DUCATI MONSTER1200, DUCATI MONSTER1200S, DUCATI MONSTER696, DUCATI MONSTER796, DUCATI MONSTER821
It is cosy and easy to use.
I have been using this for all Oil Filler Caps recently.
I like the design and the cost performance.
View detail
Fits: SUZUKI GSF1200, KAWASAKI ZR-7/S, HONDA Monkey BAJA, YAMAHA FZR400, YAMAHA SR400, YAMAHA SRV250, YAMAHA V-MAX 1200, YAMAHA XJR400, YAMAHA XJR400R, YAMAHA SRX600, YAMAHA SRX400, YAMAHA SRX400, YAMAHA XJR1200R, YAMAHA XJR1300, YAMAHA XJR400, YAMAHA FZ400, SUZUKI BANDIT400, SUZUKI BANDIT400, SUZUKI BANDIT250, SUZUKI GSX400
I replaced it while changing the entire front set!
[How is it used?
Since the entire front set was used from another company, the Top Bridge was also changed and the Stem Nut was also replaced with an aluminum one.
Was the one you received as per Image?
Quality was as good as the Image.
Was the installation difficult?
Easy to install, but Material:For Aluminum, we tightened it carefully to avoid damaging it.
How was your experience with it?
The functional aspect remains exactly the same, but the dress-up effect is outstanding.
It has been a pleasure to run.
[Included Parts:were they on?
Not particularly
[Was there anything that disappointed you?
Not particularly
It is ▼Anodized, so the color is likely to fade in the sun, but it is holding up well even if it is exposed to some direct sunlight.
View detail
Fits: HONDA NSF100, HONDA SUPER CUBC125, HONDA SUPER CUBC125, HONDA DAX125, HONDA MONKEY125, HONDA MONKEY125, HONDA MONKEY125, HONDA glom, HONDA glom, HONDA glom, HONDA CROSSCUB110(FI Vehicles), HONDA CROSSCUB110(420Conversion), HONDA CROSSCUB110(420Conversion), HONDA SUPER CUB110-PRO(FI Vehicles), HONDA SUPER CUB110PRO, HONDA SUPER CUB110(FI Vehicles), HONDA SUPER CUB110(420Conversion), HONDA SUPER CUB110(420Conversion), HONDA SUPER CUB110, HONDA APE 100
Better looking and performing front drive sprocket then the original Honda part
About quality and texture, I can confirm that the quality is great and that the material used is S45C steel which is a medium carbon steel resulting in a lighter and harder wearing part. About the feeling of use, A better looking and performing drive sprocket then the original Honda part. Products to buy together, The drive chain system on any typical motorcycle is made up of three parts that ideally are replaced together so it would be good practice to also add a rear driven sprocket and drive chain to your cart. Difficulty of installation, I can say the fitment of the drive sprocket for my installation was easy due to the ease of access and simple nature of placing the sprocket into the shaft and securing with the included locking plate. Cost performance and comparison with other products, The pricing of the product is great. You receive a sprocket made from quality and light weight material. There are no cheaper options with the lightweight design that I could find, even the original Honda part is more expensive. About shipping and packaging, My order was shipped within 24 hours of the product being in stock and I received a few emails advising me of the status up until the order was dispatched. The order arrived within the estimated date range and was extremely well packaged. I found the link supplied to track my order very useful while I was waiting for the order to land in the country. Any concerns, cautions, or advice when purchasing, I have no concerns or cautions when purchasing from Webike. I cannot recommend Webike enough for the majority of your biking needs. They not only sell aftermarket parts and bike gear but also OEM parts for your repairs and servicing needs. View detail