Reviews
Fits: YAMAHA tricker, YAMAHA YZF-R15, YAMAHA YZF-R125, YAMAHA YBR250, YAMAHA TZR250R, YAMAHA SRX250, YAMAHA RZ250R, SUZUKI Bandid 400, SUZUKI Bandid 250, SUZUKI glass tracker, SUZUKI wolf, SUZUKI ST250E, SUZUKI RGV25O Gamma, SUZUKI GSX250S Katana, KTM 390 Duke., KTM 200 dukes, KTM 125 dukes, KAWASAKI Zephyr 400, KAWASAKI Australia, New Zealand and the United States, KAWASAKI ZZR250
It was a little small.
[How is it used?
I purchased this product because the Cover I was using had deteriorated and torn.
It is used in a covered parking lot for dust protection and anti-theft purposes.
Was the one you received as per Image?
Yes
I think it is solid for the low price.
Was the installation difficult?
It is difficult to discern the front and back.
How was your experience with it?
I looked at the size chart and purchased the size listed for my car model, but it was a little small.
[Was there anything that disappointed you?
None
Other items that would be helpful
Installation points and hang/Availability and clarity of the Instruction Manual/Points to consider/Items to purchase/Opinions and requests to the Manufacturer
I thought it would be nice to have a Mark or Line that could be used as a landmark so that it would be easier to see the front and back.
View detail
The size is just right and the texture is good.
Used in 2008 YZF-R1.
LengthSize is also really Exactly.
I did not originally intend to use parts cleaner, but I was able to get in without any difficulty without using Bond paint parts cleaner.
View detail
Fits: HONDA CBX125F, HONDA NSR250R, HONDA CBR250R, HONDA VFR400R, HONDA Integra, HONDA CBR400R, HONDA SUPER BOLDOR, HONDA CBR300R, HONDA RVF400, HONDA CB400SB, YAMAHA TZM50R, YAMAHA YZF-R125, YAMAHA TZR250, YAMAHA YZF-R15, YAMAHA YZF-R25, YAMAHA FAZER, YAMAHA FZR400RR, YAMAHA YZF-R3, YAMAHA YZF-R6, YAMAHA XJ6
First MirrorBlinker installation
I put it on a yzf-25r early model.
Screw holes don't meet at all, so I have to rebuild them.
It must not be done. It is absolutely impossible for an amateur.
View detail
Good texture
I bought it because I liked the texture and design.
The moving part is fixed by Bolt, so it could be loosened by vibration, and it was necessary to carry a tool at all times. In windy conditions, the Motorcycle Cover could push it loose.
I don't put much force on the Arm Up, so the Right Arm was hard to Gap. I also used the seat Gold, but it did not improve much. I don't think it was loose due to weak tightening.
Visibility would depend on the compatibility of the Motorcycle, but I could not see directly behind me on the FAZER.
It is a Cool product and should be used well together.
View detail
Fits: YAMAHA YZF-R15, YAMAHA YZF-R125, YAMAHA MT-125, YAMAHA XSR125
I seem to have a connection with YOSHIMURAExhaust System.
There were three criteria for choosing Exhaust System.
Government or JASMA certification (←Can be installed at YSP)
Short Type
As cheap as possible
The one that satisfied all three of these requirements was YOSHIMURA's CYCLONE.
Since the product is not yet on the market, the detailed evaluation was chosen based on speculation and expectation.
View detail
For Repair
Purchased because I broke the Rear blinker by so-called cold cocking it.
CB400 NC39 SPEC1? OEM discontinued.
I thought about using a reproduct, but the bulb rating was low and I thought it would be a high flasher. If so, I decided to use LEDs.
Smaller than OEM, so Posh's 40mm extension was used for installation.
View detail
LED Blinker
It is a little expensive, but I am satisfied with the shape and stylishness. View detail
r15m Oil Element
It is easy to install. I would ask for it again. View detail
Y'S GEAR ETC Pouch3
The double-sided tape is used to attach the Magic tape, which has a very good adhesive. Unfortunately, the hole for the WiringCable is too large, so it is best to install the WiringCable together with the ETC when installing the ETC. View detail
Stable SUNSTAR
The price is a little high. View detail
Trust Brand
It is easy to install, looks good and Parenthesis is nice.
At 27,000 km on the odometer, the Chain and front and rear Sprocket were replaced at the same time and the improvement was dramatic.
The oil seal on the drive shaft, which was leaking, could also be replaced at the same time, which was very efficient.
Durability is yet to be determined.
View detail
Fits: HONDA CBX125F, HONDA NSR250R, HONDA CBR250R, HONDA VFR400R, HONDA Integra, HONDA CBR400R, HONDA SUPER BOLDOR, HONDA CBR300R, HONDA RVF400, HONDA CB400SB, YAMAHA TZM50R, YAMAHA YZF-R125, YAMAHA TZR250, YAMAHA YZF-R15, YAMAHA YZF-R25, YAMAHA FAZER, YAMAHA FZR400RR, YAMAHA YZF-R3, YAMAHA YZF-R6, YAMAHA XJ6
Installed on yzf-r15 India Spec. 2013 Not very satisfied
The included rubber cap was not usable because it was a size larger than Mirror.
There was not enough room in the loops of the mounting holes, and the Left Mirror was easily attached, but the Right Mirror was attached by brute force.
The Mirror in its packaging was facing the opposite way, so it could not easily be turned 180 degrees when trying to turn it.
Visibility is good.
View detail
Wow that's cool
I installed it because I was lonely around the Front.
Circuit also runs, so Protector in the event of a fall.
I hope it will be ??
View detail
Good product that can take 3 power supply outlets
I bought it to get power for Tachometer and ETC. The unneeded harnesses are mercilessly cut off and used as materials for other electrical work. The harnesses are too long and are in the way, and they become harness resistors and waste energy. The output side harness is also long, but do not cut that one off. The harness is connected to the battery and ACC power source, and is energized when the key is turned on, so there is no need to worry about the battery going up. The included instruction manual is very carefully written, so please read it carefully before you start work. View detail
ALCAN hands iGrip
I have used it for VTR250 and MT-03, and I bought it again this time. The color is Orange red to match the body color, and it is a good accent for the handlebar. When I installed it, I used a small amount of glue to prevent shifting and decided not to use wiring. View detail
Water pump pliers
Even a light press-fit clip can DID be tricky, requiring a press-fit of the plate to create a groove to stop the clip. A cheap chain tool often fails to press-fit the clips properly. If you use a water pump pliers to tighten the 6mm nut to the plate with force, you can get a groove for the clip. I do not want to buy a Stripele for my own use, considering the frequency of use. View detail
Used for GSXR125
Used for GSXR-125.
NORMAL428 If you want to change the Front side without changing the Size, XAM's Sprocket is the easiest way to do so.
More economical than 415Conversion.
View detail
Installation is not quite right
I didn't like the OEM's tactile Mirror so I replaced it. As a result, I am satisfied with the new Mirror because it is easier to see the back of the car and looks better than the OEM Mirror. The installation was not so easy to understand. View detail
Adding to the criteria "OEM" element (e.g. in array, in programming, in programming)
[How is it used?
YZF-R25 (2015 model):December 12, 2015 to April 29, 2017
YZF-R6 (13S):replaced about once every two years from April 29, 2017 to September 26, 2023 to date when I feel like it.
CBR250RR (MC51):Replaced about every year due to tearing from the back.
YZFSeries is used in areas where the wind has little effect but there is no roof; CBR is used in areas where there is a roof but the wind seems to pass through it well.
Was the one you received as per Image?
The product is exactly as shown in the Image. The silver-colored part even seemed to be shiningly slightly.
How was your experience with it?
As it is claimed to be a Cowl mirror, it is possible to hang the Cover completely without folding the Mirror.
The front side is Blue in color and has a wide range, so it has the advantage of being able to instantly determine its direction even in dim light.
The Silver color is Main, so it seems to have less heat in midsummer than the Black Cover.
Even if it is midsummer, it seems to be resistant to heat because it has not melted even if Cover is applied immediately after returning home.
The silver-colored areas are gradually losing their shine, but the water repellency seems to be long-lasting, as rainwater runs off as water droplets even after almost 2 years of use. (WaterproofSpray is used occasionally).
The resin part squeezes the string at the bottom, so that the cover can be quickly and easily applied when the resin part is loosened. However, the string absorbs water well.
Wind affects durability, or the side used for the CBR, which is covered and less affected by rain, often gradually cracks and tears.
When used on the YZFSeries, it has not torn and has lasted long enough to replace it when I feel like it.
The protection performance of the vehicle seems to be strong, including UV rays and rain, as it does not tear. The glossy cowl reflects sunlight well and the headlight does not come in yellowish color, so I think it is protected.
[Points to note]
Because of its shape suitable for cowl mirrors, it can be used without folding the Mirror. However, because the four corners are surrounded by the Mirror, Tank and Top Bridge on the Both Sides, water tends to accumulate when it rains, and the mirrors become dirty from there. There is no flooding.
The plastic parts are so tight that if you try to force them off while squeezing the plastic parts, the cowl or string or plastic parts will probably break.
How did it compare to other products?
I have been using Cover since I bought my first Motorcycle and have never flirted with other products, so comparisons are impossible.
If it is just Image, it seems to be kinder to Motorcycle as it does not seem to hold heat as much as Black Cover.
It seems to be easier to put on and off the Cover than the Type that is squeezed by Rubber.
Although a wide variety of Covers are sold by various manufacturers, this is one of the few products by a manufacturer that also makes Motorcycle Covers. It is neither inexpensive nor expensive and multifunctional, but it is a product that combines a sense of security and price so that it can be said to be the best choice if you have any doubts.
View detail
Fits: KAWASAKI GPZ1100, HONDA CB1000 SF, HONDA CB1000R, HONDA CB1100, HONDA CB1300SB, HONDA CB1300SF, HONDA CB400FOUR(Air cooled), HONDA CB400FOUR (water-cooled), HONDA CB400SB, HONDA CB400SF, HONDA CB400SS, HONDA CB750F, HONDA CBR1000 F, HONDA CBR1000RR FIRE BLADE, HONDA CBR1100XX SUPERBLACKBIRD, HONDA CBR250 R MC17, HONDA CBR250 R MC19, HONDA CBR250R (MC41), HONDA CBR250RR, HONDA CBR400R(NC23)
It's nice
Grip feels softer and less vibration. View detail