Defective item

It was a molding defect with a tumor-like bump inside.
I had no time to return or exchange the product, so I had to go through a lot of trouble to remove the bump and install it, but I was disappointed with the quality of the product, which was less than Chinese for the good gold price. View detail

Large change

LargeThey are solid, and most importantly, they have a waterproof feature, which is great. I chose the size by referring to the size chart. I have done so in the past, but I tended to buy a Large size because I was worried about it. If I did so, all the lower part of the cover would be on the ground, and it would be difficult to put the cover on and take it off. Moreover, the cover itself gets dirty. This time, I chose a size a little longer than the overall length of my motorcycle, so it was just right. View detail

Add on to Clamp on heated grips

Best bang for your buck, works ok, and i like it works/plugs in with clamp on heated grips! I have good luck with most all webike products. I purchased 1 of these along with the associated heated lock grips for my wife's and my bikes. Installation was straight forward after watching the videos. Just had a chance to try them out over winter break with temps around 10C - 15C. They took a few minutes to warm up, but did a great job. We typically started on a setting of 2 - 3, then turned them off after our riding activity increased. Very warm, even through our winter gloves. Great purchase, happy wife!Would recommend! Fast shipping as always too.Thank you Webike. View detail

Easy to install, better than ManufacturerOEM

The switch is integrated with the grips for easy installation, requiring only wiring and no effort.
It is also possible to point it straight up to avoid touching it when operating the blinker. If you warm up the Heater to the maximum Large setting, you can easily pull out the Grip.
The thickness is just right for general OEMSize and is a non-slip Material. View detail

Good buy. Must wear in fall and winter!

[How is it used?
In use on NMAX 155.
We started using it in November in Kanto, where it has become a little chilly.

Was the one you received as per Image?
There was no Large Gap in the product performance itself, but the following two points were a little different from what I had imagined.
It was bigger than I thought it would be.
. more than I thought. [Color] It was Smoke (I was imagining something like Mellow Smoke).

Was the installation difficult?
There are no particular difficulties; simply remove the Mirror and re-tighten it together.
Since the MirrorMount Bracket is installed, it was a little troublesome to tighten it together with the MirrorMount Bracket in terms of adjusting the mounting holes.

How was your experience with it?
After installation, the effect was very Large and the running wind in my hands was drastically reduced.
When combined with Electrothermal Gloves, they run comfortably without any loss of warmth.
I have used it on rainy days, and it has a certain effect, though not as good as the Handlebar Cover.
Although the size is Large, the width fits inside the Mirror, so there is no problem with slipping through.
It is better to fine-tune the mounting position so that the finger fits firmly between the Brake lever and Knuckle guard.
If you install it with Rucksack re, you will lose the finger clearance and have to do the adjustment twice.

The effect of the installation is Large, so I plan to keep it installed through the fall/winter and early spring. View detail

very good. This is excellent in finish and quality

There were many subsidiary materials, so there was no difficulty in installing them, and I personally think the LED light is beautiful I'm willing to install it on my other bike. View detail

simply gorgeous!!

The nmax sounds like a much bigger engine now! It is not loud, but it is naturally louder than the original. The quality is astonishing! Setup was perfect. View detail

Already the third one.

Every time I change motorcycles, I install a new grip heater, but this heater is the only one I use. The heater remembers the last Level, so it keeps the temperature at the right level. View detail

Ruthenium~ is what, what, what♪

When SEROW250 is used, the corresponding MotoDX." I had been using Premium RX (DCPR7ERX-P) by replacing the plug cap, but this time, it will be MotoDX Plug (CPR8EDX-9S).
It is the same Engine as the two JigSar models, so the same application should be used.
By the way, Car has been using Ruthenium type Plug, so I have a sense of security about its durability (I think it will last longer than Windshield IRIDIUM type), and I have no negative impression about its usability, so if it is worth the cost (I don't think it will be a loss), don't hesitate to buy it! If you don't think it's worth the cost, don't hesitate to buy it!
It is impossible for us amateurs to perceive only a slight difference, but we can still feel the smoothness of the product, which we think is very good. 。 I can recommend it to many people! View detail

Vmax1200.

I got this because it was cheaper than OEM. Nothing wrong with it. View detail

Great!

Looks good and works well as a Handlebar Guard
I think it would have been better if the size was a bit larger and windproof effect was added. View detail

I'm generally satisfied!

I purchased the L Size for my CB250R for about half the list price.
The compatibility chart lists CB250R as L Size, but in reality I felt that the Motorcycle Cover was a little short in overall height.
Specifically, I am worried when there is snow on the ground because I can see a little of the Wheel in the back as shown in the photo. (I guess I am too nervous).
The front Wheel is also hidden when the Cover is extended all the way to the end, but it may shift and stick out a little in wind or other conditions.
For now, we decided to wait and see until spring.

However, we are otherwise satisfied with the Large change in use.
I especially like the waterproof and moisture-proof feature. I used to use their Motorcycle Cover Kizuna on my previous Motorcycle, and when I compared the product descriptions on the Package, the only difference is that it has a flame retardant finish, but the flameproof Motorcycle Cover Kizuna does not allow water to seep through to the Cover in normal rain, and I felt that it has a higher moisture-proofing function. However, I felt that the flameproof Motorcycle Cover Kizuna has a higher moisture-proofing function. (This may be the difference in the number of years of use.)
We recommend buying the fireproof bond because there is no LARGE difference between it and the unbranded bond at the current Net price. View detail

large-volume saving

I found this product when I was looking for a good helmet holder for my motorcycle.
Now I can avoid Helmet from theft and other dangers. I like this product very much. View detail

Motorcycle Covers are all the rage now.

Easy to install, well thought out. Expect durability. View detail

Cheap but not high quality impression

I purchased this product as an OEM replacement. Unfortunately, rust was floating on the surface at the time of purchase new….

The plating itself was not floating, so I polished it and used it. The Pulley boss was already worn out, so I replaced it with a Smooth gear shift.

If you are concerned about rust, OEM is better because they take measures by wrapping rust-proof paper to prevent rust from occurring. View detail

Ngk is my frist choice

The quality and texture is very good .NGK spark is popular in the world so i don't worry about that. This spark feeling is same with Ngk Iridium spark . The installation is very easy. The cost is cheap The shipping is fast and packaging is very good . View detail

Good

This coil quality and texture is very good. After install this coil I can feel the throttle respon is little batter. The installation is very easy. Cost performance is good and comparison with oem coil. The shipping fast and the packaging is good. View detail

I appreciate the fact that they sell Single Body for consumables.

KOSO Pulley kit is required since the OEM Slide Piece is no longer available.
Some manufacturers do not supply small consumables like this, and have to replace them with kits for small items, so it is nice to be able to supply only consumables at a reasonable price.

However, I feel that the durability is lower than NORMAL, so I would like to see the durability increased.
The Weight Roller and Belt are still usable after 5,000km, but the Slide Piece is worn out and the Ramp Plate and the Gold part of the Pulley are touching each other. (Molybdenum grease is applied to the Slide Piece) View detail

Wiring is Limit...in a way it fits.

This is the third KIJIMA Grip heater I have installed. The performance and cost performance are excellent, but the distance to the Right and Left Wiring connection points is short, and there is a fuse in that area, so I have to remove the tanketc. to get to it in case of emergency, which is a shortcoming.
The OEM grip for the CL500 is a type without a bar end, and this grip heater is compatible with this type, but this time I installed a Zita bar end plug, which fits well. The smallest part of the supplied throttle fits perfectly.
And when the Grip is aligned with the LeftHandlebar End, there will be a gap of about 3mm at the Handlebar Switch. View detail

The feeling of shifting gears has changed quite a bit.

The Belt was replaced because it had traveled 18,000 km since the last Belt replacement. When we looked at the removed Belt, we found that it had not worn down to the limit of use, but the side angles were worn and attached.
I was worried about how the shifting would feel after installation, but I got the impression that the shifting became smoother, which was a good impression. However, I had the impression that the Engine RPMs dropped a little when shifting throughout the entire range, and the maximum speed dropped. (Tears)
I need to re-set with Weight Roller. View detail