Reviews
Fits: YAMAHA AEROX125, YAMAHA AEROX155, YAMAHA NMAX125, YAMAHA NMAX155, YAMAHA NVX125, YAMAHA NVX155, YAMAHA BW'S125, YAMAHA SMAX, YAMAHA CYGNUS Griffith, YAMAHA MAJESTYS, YAMAHA AEROX155, YAMAHA NMAX155
You need modify to make it work
This tools introduce said that can be work for 24mm collar. But I can't use the 24mm oem collar put inside the tools. So I use the vernier scale to to measure that. The tool entrance side diameter only 23.5-23.6mm... This tools is expensive that make me disappointed.. Because I need modify to make it work.. View detail
The most satisfactory shelf
My motorcycle is YAMAHA NMAX155. To install the tail box, I bought a variety of rear shelves. The workmanship is rough or the accuracy of the installation holes is not accurate. Although there are some small flaws in the ALCAN hands purchased from webike, the shelves are basically It meets my needs, and the best thing is that it can use the shock-absorbing rubber sleeve on the original tailstock, which I am very satisfied with. -------------------------------------------------- -------- My motorcycle is YAMAHA NMAX155. In order to install the tail box, I bought a number of rear shelves. The workmanship is rough or the accuracy of the installation hole is inaccurate. It meets my needs. The The best thing is that it can use the shock absorbing rubber cover on the original factory, which I am very satisfied. Powered by Google Translator View detail
Fits: YAMAHA NMAX125, YAMAHA NMAX155, YAMAHA NMAX155, YAMAHA NMAX155
No doubt!
I can pimp it with no problem at all!
The problem is not with this product, but with thisQuantity:Fog Lamp to be set!
If you are a rider who needs brightness, you may consider a Fog Lamp with a large size, but the biggest problem is the size of the Fog Lamp. (Length when installed) It is
The Fog Lamp was designed to be compact from the beginning, so there was no problem with the quantity.:I was able to set it, but still there was not enough room for clearance with the Front Fender, and it was Limit at the Full Bottom of the Front Fork. (Sweat)
I'm going to change the subject, but a similar product to this one is Ama-Xan." However, it is said that it requires modification due to problems such as the Bolt position not matching or interfering with the Body, so be careful!
Quantity of Fog Lamps in the lower part of the Headlight Compact:If you're going to set, you can't go wrong with this one from Coco's!
View detail
Fits: HONDA CB1100, HONDA CB250R, HONDA CB300F, HONDA CB400SB, HONDA CB400SF, HONDA CB400X, HONDA CB500X, HONDA CB650R, HONDA CBR400R, HONDA CBR400R, HONDA CBR500R, HONDA CBR600RR, HONDA CBR650R, HONDA CBR650RA, HONDA FTR223, HONDA FTR223, HONDA GROM, HONDA GROM, HONDA LEAD125, HONDA NC750X
KIJIMA VANS x CULT Collaboration Grip 7/8-inch
KIJIMA VANS x CULT Collaboration Grip 7/8-inch It goes well with the blue w800. I'm very satisfied with the harmonious color. The grip is moderate and not slippery. It became a better w800 with a unique pattern. As expected, the delivery was fast and the quality was good, so it was a satisfying deal. Thank you. View detail
Protective seat cushion
"My motorcycle is a YAMAHA NMAX155. There are always wild cats where I park my motorcycle. It jumps around and the seat cushion is easily scratched. So I bought this original YAMAHA seat cushion leather from webike. , it protects my original factory seat, but also increases riding comfort, and the seat cushion is not so slippery. --------------------- ------------------------------------- My motorcycle is YAMAHA NMAX155. There are always wild cats where I parked the motorcycle. It is easy to be caught by jumping and jumping. It can protect my original seats, and at the same time, it can also increase cycling comfort, and the seat cushion will not be so slippery. Powered by Google Translator" View detail
Fits: HONDA CB400SS, HONDA CBR400R, HONDA CBR400R, SUZUKI STREET MAGIC II, SUZUKI WOLF50, SUZUKI STREET MAGIC, SUZUKI RM80 LX, SUZUKI RM80 LW, SUZUKI RM80 V, SUZUKI RM80LT, SUZUKI RM80 LV, SUZUKI RM80, SUZUKI STREET MAGIC 110II, SUZUKI STREET MAGIC 110, SUZUKI swish, SUZUKI WOLF125, SUZUKI GN125E, SUZUKI GSX-S125, SUZUKI GSX-R125, SUZUKI WOLF200
It's still good!
I think DAYTONA's Cover is cosy. View detail
Excellent wind protection
My motorcycle is YAMAHA NMAX155. The height of the windshield of the original factory is very short, which means it has no windshield effect at all. The height of this KAPPA windshield is 81cm, which can block the cold wind well. The cold air to the hands, in short, the effect is very good, it is recommended to buy. -------------------------------------------------- -------- My motorcycle is YAMAHA NMAX155. The original windshield height is very short and almost no. It does not have the effect of windshield. This KAPPA windshield height has 81cm. The cold wind to the hand, in short , the effect is very good and recommended to buy. Powered by Google Translator View detail
stable shelf
My motorcycle is a YAMAHA NMAX155. The original factory of this car does not have a shelf and cannot be equipped with a tail box, so I bought this YAMAHA original rear shelf on webike. This rear shelf is made in Thailand, and the original handrail needs to be removed when installing it. It is relatively easy to install the upper cover of the tail light, and the tail box can only be matched with the original 30L or 39L tail box of YAMAHA. -------------------------------------------------- -------- When my motorcycle is Yamaha Nmax155, there is no rack in this car that cannot be equipped with a tail box, so I bought this Yamaha original shelves on Webike. It is easier to install with the upper cover of the taillights. The tail box can only be paired with Yamaha's original 30L or 39L tail box. Powered by Google Translator View detail
Fits: YAMAHA N-MAX, YAMAHA NMAX155, YAMAHA N-MAX, YAMAHA NMAX155
great accessory
My motorcycle is a YAMAHA NMAX155. After driving this car for more than a year, the transmission part feels that the vibration has become larger and the acceleration force is not enough, so I bought this M-SOUL LEVEL10 RACING high-speed pulley kit on webike. It can increase the top speed of this car and reduce the vibration when starting. The actual experience is better than that of the original factory, and the top speed can be increased by about 10KM/hour. -------------------------------------------------- -------- My motorcycle is YAMAHA NMAX155. After more than a year of driving, the transmission part feels that the vibration has become larger and the acceleration is not enough, so I bought this M-Soul Level10 Racing high- speed Pully disk kit on Webike. It can increase the speed of this car and reduce the vibration of the startup. The actual experience is better than the original factory, and the speed can increase by about 10km per hour. Powered by Google Translator View detail
Fits: YAMAHA Tricity155, YAMAHA NMAX155, HONDA CB500F, HONDA CB500X, HONDA CBR500R, YAMAHA VINO, YAMAHA MAJESTYS XC155, YAMAHA DELUXE, YAMAHA TRICITY125, YAMAHA TRICITY125ABS, YAMAHA JOG, YAMAHA TRICITY 155 ABS, YAMAHA NMAX 155, YAMAHA NMAX, YAMAHA FJR1300 A, YAMAHA FZ16, YAMAHA FJR1300 AS, SUZUKI V-STROM650, SUZUKI V-STROM650 XT, SUZUKI SV650X
Improved blow-off
I didn't have high hopes for this plug, since I've heard that changing plugs doesn't give you any particular experience, but when I opened Axel, it was clear that it burned more consistently. I can't go back to Normal plug. View detail
Fits: YAMAHA GRAND AXIS, YAMAHA GEAR, YAMAHA Active, YAMAHA RS100, YAMAHA NMAX155, YAMAHA NMAX125, YAMAHA BW'S50, YAMAHA CUXI, YAMAHA FORCE, YAMAHA BW'S100, YAMAHA BJ, YAMAHA GTR, YAMAHA BW'S125, YAMAHA JOG Aprio, YAMAHA Axis 50, YAMAHA Axis 90, YAMAHA Axis Z, YAMAHA Axis Street, YAMAHA Grand Majesty 250, YAMAHA Grand Majesty 400
good quality
My motorcycle is YAMAHA NMAX155. The gearbox port screw of this car is plastic, which will crack after a long time and cause the gear oil to leak out. I bought this KN Planning gearbox oil drain screw on webike. It is Aluminum CNC anodized surface, durable and will not be corroded. -------------------------------------------------- -------- My motorcycle is YAMAHA NMAX155. The gearbox screw of this car is plastic. After a long time, it will crack the gear oil. The aluminum CNC anode oxidation surface, strong durability will not be corroded. Powered by Google Translator View detail
Fits: HONDA SH125, HONDA NX250, HONDA XR650L, HONDA LEAD125, HONDA XR250L, HONDA CBR900RE, HONDA DIO110, HONDA CRF230M, HONDA CBR900RR, HONDA CRF230L, HONDA CB900F, KAWASAKI Z1000, HONDA CB600F, HONDA CB1300 SUPER FOUR, HONDA Spacy110, YAMAHA YZF-R3, YAMAHA XMAX300, YAMAHA NMAX155, HONDA Forza300, HONDA CB150R
Very warm
I purchased this product to make winter touring more comfortable.
The temperature can be adjusted and it is very warm, even through the thicker Gloves.
It is indispensable for winter touring.
LED Indicator glows in 5 colors to adjust Grip temperature.
5-step temperature control for Blue, Green Light, Color:It emits light in Yellow, Orange, and Red, so it is easy to check while driving.
Green Light or Color during warm daytime hours:Yellow. I use it in the morning and evening, adjusting it to Orange or Red.
View detail
Fits: DUCATI 1098 S TRICOLORE, YAMAHA FZR250, DUCATI 749, DUCATI 748, DUCATI 748SPS, KAWASAKI ESTRELLARS, TRIUMPH DAYTONA675, MV AGUSTA BRUTALE-S, DUCATI 748SP, DUCATI 748S, DUCATI 748RS, DUCATI 748R, KAWASAKI ESTRELLARS LIMITED EDITION, DUCATI 749S, DUCATI 749R, DUCATI 749 DARK, DUCATI 1098 S, KAWASAKI ELIMINATOR 125, DUCATI STREETFIGHTER848, DUCATI 1299
Almost satisfied
I used it on my gsx250r. It is the size of the limit in terms of the large size, so I think it is a little strange to cover it with a large size, but if it is too large, it will rub on the ground and get dirty, so it depends on which side you take. I chose this one because I wanted to use it as a perfect fit, but I am prepared for the fact that it is hard to put on. However, as you can see in the picture, the bottom of the bag is not touching the ground, but only the front side is touching the ground.
Also, the flame retardant Seal to put on the Exhaust System contact area peeled right off, so I threw it away. I don't need it because I don't cover it while it is hot, but it might be MinusPoint for those who are looking for it. I'd be happy if it had stuck to a wider area originally.
View detail
Fits: YAMAHA MT-03, YAMAHA MT-25, YAMAHA N-MAX, YAMAHA YZF-R25, YAMAHA YZF-R3, YAMAHA MT03, YAMAHA NMAX155, YAMAHA YZF-R3, YAMAHA MT03, YAMAHA NMAX155, YAMAHA YZF-R3
exquisite accessories
My motorcycle is YAMAHA NMAX155. I bought this POSH solid balance terminal on webike. It is made of all-aluminum anodized, which is much more advanced than the original plastic terminal. The installation is also very simple, and there are many colors to choose from. It makes my motorcycle a lot more handsome. -------------------------------------------------- -------- My motorcycle is YAMAHA NMAX155. I bought this POSH solid balanced terminal on Webike. It is made of all aluminum anode oxidation. It is much more advanced than the original plastic terminal. Make my motorcycle a lot handsome . Powered by Google Translator View detail
Fits: HONDA CB1100, HONDA CB250R, HONDA CB300F, HONDA CB400SB, HONDA CB400SF, HONDA CB400X, HONDA CB500X, HONDA CB650R, HONDA CBR400R, HONDA CBR400R, HONDA CBR500R, HONDA CBR600RR, HONDA CBR650R, HONDA CBR650RA, HONDA FTR223, HONDA FTR223, HONDA GROM, HONDA GROM, HONDA LEAD125, HONDA NC750X
comfortable grip
This KIJIMA (Tajima) VANS × CULT 7/8" grip cover I bought on webike is very suitable for my Kawasaki Ninja ZX-6R. This is a joint grip cover, combined with VANS classic texture , very comfortable to hold. -------------------------------------------- -------------- This Kijima (Tanishima) Vans × Cult 7/8 ""grip set that I bought on Webike and installed it on my Ninja ZX-6R of Kawasaki. grab. Powered by Google Translator View detail
Fits: YAMAHA NMax125, YAMAHA NMax125, YAMAHA CYGNUS Gryphus, YAMAHA NMax125, YAMAHA BirdCity125, YAMAHA BirdCity125 ABS, YAMAHA XForce, YAMAHA NMax155, YAMAHA NMax155, YAMAHA NMax155, YAMAHA BirdCity155
Durable than original
My motorcycle is YAMAHA NMAX155. The transmission filter element of this car needs to be cleaned and replaced every 3000-4000KM. The original one is not very durable and needs to be replaced every time. This K-PIT transmission cover filter element can be removed for cleaning After continuing to use, it is a good two-layer filter, and the price is cheap. -------------------------------------------------- -------- My motorcycle is YAMAHA NMAX155. The transmission filter element of this car needs to be replaced once every 3000-4000km. Continue to use it later, it is a two -layer filtering effect, and the price is cheap. Powered by Google Translator View detail
Fits: HONDA SH125, HONDA NX250, HONDA XR650L, HONDA LEAD125, HONDA XR250L, HONDA CBR900RE, HONDA DIO110, HONDA CRF230M, HONDA CBR900RR, HONDA CRF230L, HONDA CB900F, KAWASAKI Z1000, HONDA CB600F, HONDA CB1300 SUPER FOUR, HONDA Spacy110, YAMAHA YZF-R3, YAMAHA XMAX300, YAMAHA NMAX155, HONDA Forza300, HONDA CB150R
Performance is satisfactory. Surprisingly installation Large change
? functional aspect
It is the middle of winter and you can feel the warmth even from Winter Gloves, which is more than satisfactory for the price.
I am not dissatisfied with the Grip feel as well as the OEM et cetera.
? installation
The Right Side is no problem since the entire Throttle is replaced, but the Left Side is very tight and is difficult to insert even after warming it up by energizing it according to the Instruction Manual.
I used soapy water because using lubricant might cause the grips to spin later, but even so, I finally got them in after about 10 minutes of gripping at full power.
After that, it doesn't freak me out, so in the case of the SV650, no bond is needed.
View detail
durable accessories
My motorcycle is YAMAHA NMAX155. My NMAX felt some vibrations in the transmission after driving 20,000 KM, so I bought this ADVANCEPro super resin Puli beads on webike to replace the original Puli beads. It is It is made of special fiber resin with durability and excellent heat resistance. After the replacement is completed, the effect is good, and it is hoped that it will be more durable than the original one. -------------------------------------------------- -------- My motorcycle is YAMAHA NMAX155. My NMAX feels some vibration after driving 20,000 km, so I bought this AdvancePro super resin on Webike for replacing the original Puli Zhu, it, it, it The use of special fiber resin to make durability and excellent heat resistance, and the effect is good after replacement, hoping to be durable than the original factory. Powered by Google Translator View detail
Fits: HONDA SH125, HONDA NX250, HONDA XR650L, HONDA LEAD125, HONDA XR250L, HONDA CBR900RE, HONDA DIO110, HONDA CRF230M, HONDA CBR900RR, HONDA CRF230L, HONDA CB900F, KAWASAKI Z1000, HONDA CB600F, HONDA CB1300 SUPER FOUR, HONDA Spacy110, YAMAHA YZF-R3, YAMAHA XMAX300, YAMAHA NMAX155, HONDA Forza300, HONDA CB150R
Installed on a 2011 CBR600RR.
According to the Webike system, the CBR600RR is compatible with the 2023 CBR600RR and GH10 130mm Type, but the year is not shown in the Others section. I measured the actual length of the grip and it was exactly 120mm, so I chose the 120mm type.
The installation was done by a nearby store using PITService, but this 2011 CBR600RR requires the tank and air cleaner to be removed and the carburetor side to be loosened in order to remove the thailand part of the accelerator wire. Therefore, it seemed to be quite a lot of work. (I had given up on installing it by myself because I had gotten the information beforehand.)
It heats up immediately after turning on the power and it is hot when the power is at 100%. It is very comfortable.
I was also concerned about mishandling of the Blinker, but there seems to be no problem.
Grip diameter is no different from NORMAL. The surface pattern is also within the safe range.
The motive was that I did not want to wear thick Winterhoof Gloves, but this would be Large length even with thinner Gloves.
View detail
Fits: HONDA CB400SF, HONDA CB400SB, YAMAHA TMAX, YAMAHA XVS250, YAMAHA XMAX250, YAMAHA VMAX12, YAMAHA VMAX12, YAMAHA VMAX12, YAMAHA VMAX12, YAMAHA VMAX, YAMAHA VMAX, YAMAHA VMAX, YAMAHA VIRAGO1100, YAMAHA VMAX, YAMAHA MAJESTY250, YAMAHA SR500, YAMAHA TW 200E, YAMAHA TW 200, SUZUKI V-STROM 650, SUZUKI SV650
useful gadgets
My motorcycle is YAMAHA NMAX155. When I changed the brake fluid last time, I broke the original air release rubber cap. I have nowhere to buy it. Until I saw this KIJIMA air release screw rubber cap on webike. It is a universal accessory, suitable for most motorcycles, and the red one looks better. -------------------------------------------------- -------- My motorcycle is YAMAHA NMAX155. When I replaced the brake oil last time, I broke the original air -to -rubber rubber and I had no place to buy it until I saw this Kijima put the air screw rubber cover. It is a universal accessory, suitable for most motorcycles, and the red ones are better. Powered by Google Translator View detail