Reviews
These are the ideal Gloves!
The design and comfort of the Gloves are just like the Image! 。 Leather is soft and fits my hand very well. 。 We have a solid Protector in place where needed. 。 This is the second one I have purchased from you, but I am glad I took the plunge. 。 The other one is used by a friend of mine and is well received. 。 The result is Large satisfactory product. View detail
trial and error
Only Bracket is purchased to install Separator.
Since it cannot be installed as it is, it was processed secondarily. The Stem Steel Emblem is not installed.
Please note that this is not normal usage.
View detail
I knew RR had to be this way.
Since we mainly specialize in circuits, we do not need a tough tandem footpeg, so we installed a bracket from the same manufacturer. The silencer is not shaky during driving because of the 5mm thickness of the plate. View detail
Rear axle shaft
I replaced the Front and it was so good that I also replaced the Rear.
The turnaround of the corner became smoother.
View detail
Fits: YAMAHA YZF-R1, YAMAHA YZF-R1M, YAMAHA YZF-R7, YAMAHA YZF-R6, YAMAHA YZF-R25, YAMAHA YZF-R3, YAMAHA MT-10, YAMAHA MT-10SP, YAMAHA MT-09, YAMAHA MT-09SP, YAMAHA MT-07, YAMAHA MT-25, YAMAHA MT-03, YAMAHA Tracer9GT, YAMAHA Tracer900, YAMAHA Tracer900GT, YAMAHA MT-09Tracer , YAMAHA XSR900, YAMAHA XSR700, YAMAHA FZ1/Fazer
Very satisfactory product
The finish is satisfactory in terms of both texture and ease of use.
However, the gap between the tank and the cap is a little empty, so we have to be a little careful when washing the car in the rain or when washing the car, but there is no problem because water never enters the tank.
View detail
YOSHIMURA Fender Eliminator Kit
Item arrived..super fast shipping.3 days arrived.check and all item is in order.never been disappointing.highly recommend.thank you team webike.awsome job.5 ⭐ View detail
(after neg. verb stem) had better (verb)
[How is it used?
I bought this product to prevent my helmet from being stolen when touring or going out.
I used to not have a Helmet lock, so I had to carry my Helmet with me when I got off my Motorcycle.
I was always worried about hanging it on Mirror because I think it is easy to be stolen.
Was the one you received as per Image?
KITACO
KITACO in the world
It's in a clear bag.
Quantity:2pc keys are included, so even if you lose one, you can rest assured that you have another one!
Was the installation difficult?
May be difficult for beginners
All the Rear cowl has to be removed, so if you have never removed a cowl before, please do so carefully.
If too much force is applied, the plastic part is prone to cracking.
The bolt on the Tandem Footpeg is coated with Screw Lock, so it was a bit odd to remove the Bolt Large, but it is not impossible to remove.
How was your experience with it?
I was attracted to this product because of its mounting position, so it is not very noticeable and I think it is very beautiful.
I think the recommended point is that it is the same color as the bright black Tandem Footpeg, so it does not disrupt the balance of the entire vehicle.
However, I have no problem because I have a 1 pc exhaust system, but if you use the OEM Dual Exhaust System, the helmet will come in contact with the exhaust system, and if you apply the helmet when it is hot, the interior of the helmet may melt, Be careful!
[Included Parts:were they on?
Key Quantity:2pc
Quantity:Note that if you lose both 2pcs, you are finished!
[Was there anything that disappointed you?
OEMExhaust System may not be so easy
Other items that would be helpful
Installation points and hang/Availability and clarity of the Instruction Manual/Points to consider/Items to purchase/Opinions and requests to the Manufacturer
Recommended for a single-pipe Exhaust System!
View detail
We use it for our cars
I use it in my high ace Regis car. 12v is the same as motorcycle, so there is no problem. Minus terminal is an appropriate bolt that can be used for earth measurement. The Minus terminal is a suitable bolt that can be used for earth.
I use it on my iPhone12mini and it charges by turning the key on and also by Idling, it does not charge when the Cell is turned on but it will come back on soon. The charge increases even when using the iPhone as Navigation, watching Youtube, or using Bluetooth to connect to other devices. Naturally, it charges faster when the screen is dark or when the app is not in use.
I am using this Charger in my motorcycle BALIUS2, but I can't charge the battery near Idling due to lack of power.
The problem is that the phone becomes loud and unusable when exposed to warm air from a heater or when not exposed to cool air from an air-conditioner under the blazing sun in mid-summer, instead of charging. Also, the location of the charging pad on the phone has a significant impact on the performance of the device. The purchaser should find out where the charging pad can charge the phone the fastest.
View detail
Fits: YAMAHA YZ125X, YAMAHA YZ250F, YAMAHA YZ250X, YAMAHA YZ125, YAMAHA YZ250, YAMAHA YZ426F, YAMAHA YZ450F, YAMAHA YZ80, YAMAHA YZ85
It may be a classic.
I bought this one because a certain lever that does not break interferes with the CloseHand guard on a 4Finger. If you care about the appearance, you should choose the cut-out type, but if you don't want it to break during the race, you should choose the Forged Type.
The exterior is of high quality, as one would expect from Zita. Installation is a simple and easy process. Adjustment is stepless, but requires a tool, so it is a little troublesome.
I have fallen a few times since installation and have not had any breakage or other troubles.
View detail
Fits: YAMAHA YZ125, YAMAHA YZ250, YAMAHA YZ125X, YAMAHA YZ250X, YAMAHA YZ250F, YAMAHA YZ400F, YAMAHA YZ450F, YAMAHA YZ450FX, YAMAHA YZ250FX
Easy to apply Decal without YAMAHA's stamp
When applying Decal, OEMGuard has a raised YAMAHA imprint, and I bought it because I thought Decal would peel off easily.
It looks good, installs well, and is durable enough when used. No complaints, no excessive interference with the Fork outerTube, and the Decal was easy to put up.
View detail
Excellent
Genuine Honda part, and new; from long-term stock. It has a good finish and fits perfectly on my motorcycle. Great. I recommend it. View detail
MASTER.
[How is it used?
Purchased a new OEM hose because it is not long enough to replace the Master Cylinder.
The OEMHose is a little short, so if you use an external master like brembo or GALE SPEED, it is not long enough, but if you use an extended VERSIONBolt, you can use it as is somehow, but the angle is a limit, so it could crack and break at any time.
Large front brake, so do not let your guard down!
Was the one you received as per Image?
Usual quality
At first I think it's made in Japan, but when I looked it up, it's a United Kingdom brand, so it's full of luxury!
Stickers are also included in the package, so you can quickly attach them to the car body!
Was the installation difficult?
Can be difficult if you're a beginner.
When removing the hose, be careful not to spill the Fluid!
If you put it somewhere, it will discolor or corrode quickly, so please prepare water before proceeding.
How was your experience with it?
as expected (as opposed to expected)
Soft and easy to angle
Nothing in particular that I think is wrong.
Just for reference.
Master Cylinder:GALE SPEEDVRC
Hose length:I bought 285mm, but when I installed it, 260mm is also enough, so I recommend 260mm.
In line with this, Active's Flare block adapter" should also be purchased in conjunction with the required
[Included Parts:were they on?
Sticker
[Was there anything that disappointed you?
I don't have it!
Other items that would be helpful
Installation points and hang/Availability and clarity of the Instruction Manual/Points to consider/Items to purchase/Opinions and requests to the Manufacturer
VERSIONBolt is not included.
View detail
unaffected and sober
This is the top box of the prestigious Manufacturer.
I think it looks great on a Large Motorcycle with no problems with the texture.
This is also a good choice for those who do not want to use a regular Plastic box.
However, in the OEM state, the key cannot be removed in the locked state, so I think this is not very user-friendly.
Some individuals sell one-key cylinders that can be opened and closed with the vehicle's key, so replacing it with a one-key cylinder will improve usability.
View detail
Fits: TRIUMPH DAYTONA675, KAWASAKI NINJA400, SUZUKI , KAWASAKI ZX6R, KAWASAKI NINJA1000 (Z1000SX), KAWASAKI ZX10R, KAWASAKI Z800, KAWASAKI Z400, KAWASAKI Z250, KAWASAKI Z1000, KAWASAKI Ninja 1000SX, KAWASAKI ninja, DUCATI Late 999, HONDA , DUCATI 749, BMW S1000R, BMW S1000RR
Wound-resistant DURACON
I used to use a Hook bolt also made by J-TRIP, but after repeated use, the bolt was too heavy.
The scratches on the surface of the wheel have made it look dirty, so we decided to replace it with DURACON, which has been used on Ninja 250R and has a good track record.
It is DURACON, so any scratches are not noticeable.
View detail
Lever exchange is good.
I used to use the previous Active, but this one looks good with a rigid appearance and precision. View detail
good
I installed it on my current Ninja 400.
There is no detailed year information on the webike, but it can be installed on a '23 model.
I had a hard time deciding between DAYTONA and WorldWalk's Mount bar, but I had used WorldWalk's Mount bar on my GSX250R before, so I decided to go with it again this time.
Installation is very easy as all you have to do is remove the screw at the handlebar and install it. (about 5 minutes)
I just put it on, so I don't know how durable it is, but it is a good product and well made, so I am recommending it.
View detail
100 points
I think this is the most suitable exhaust system for DAX. The sound is a heavy bass! The sound is so powerful that it is hard to believe it is a Type 2 moped. Especially, the sound at the time of pinging downshift is unforgettable! It's so bad! (It is a little too loud at speeds over 6000 rpm, but it is just right for safe driving at legal speeds. I'm really glad I bought it. View detail
Firm Grip force
Product Name
PROGRIP Pro grip Seat cover
Item Number
PG5011S-G
Vehicles
Honda CRF125F 2024 MODEL
Number of man-hours
1 hour
Required Tools
Torque wrench, Hexagon socket, Hexagon socket, Extension bar, Combination wrench, -Driver, Hammer, Pliers, ClipGun, etc.
Why did you choose this product?
apprehensive
Product Name
PROGRIP Pro grip Seat cover
Item Number
PG5011S-G
Vehicles
Honda CRF125F 2024 MODEL
Number of man-hours
1 hour
Required Tools
Torque wrench, Hexagon socket, Hexagon socket, Extension bar, Combination wrench, -Driver, Hammer, Pliers, ClipGun, etc.
Why did you choose this product?
I often sit on a seat, so I was looking for a seat with good grip and found this one.
Was the one you received as per Image?
It was just like the Image. It has more gripping power than I expected.
Was the installation difficult?
It is difficult. It takes hang to put it up tight without too much.
How was your experience with it?
I am Large satisfied with the firm Grip force.
[Included Parts:were they on?
None in particular.
[Was there anything that disappointed you?
None in particular.
Other items that would be helpful
Installation points and hang/Availability and clarity of the Instruction Manual/Points to consider/Items to purchase/Opinions and requests to the Manufacturer
View detail
Fits: SUZUKI JR80, BETA EVO 2T, BETA RR 2T, BETA rr 2t 300 enduro, HONDA NS-1, HONDA NSR50, HONDA NSR80, HUSQVARNA TE300, KTM 250 EXC, KTM 250 XC, KTM 250 XC-W, KTM 300 EXC, KTM 300 XC, KTM 300 XC-W, KTM 300 XC-W Six Days, KTM Freeride 250R
Required for 2nd strike.
Product Name
NGK NGK Japan Special Ceramics Standard Plug BR7ES 5122
Item Number
BR7ES
Vehicles
EXC250 (2-Stoke) 2022
Number of man-hours
10 minutes
Required Tools
Torque wrench, Hexagon socket, Hexagon socket, Extension bar, Combination wrench, -Driver, Hammer, Pliers, Plug wrench, etc.
Why did you choose this product?
I decided to purchase this one as a spare because Plug often gets covered before Race.
Was the one you received as per Image?
It was just as Image.
Was the installation difficult?
It is a hassle because you have to remove the tank. It is possible without removing the tank, but it is faster.
How was your experience with it?
It is a stable and reliable NGK product. I think the price is good since it is a consumable item.
[Included Parts:were they on?
None in particular.
[Was there anything that disappointed you?
None in particular.
Other items that would be helpful
Installation points and hang/Availability and clarity of the Instruction Manual/Points to consider/Items to purchase/Opinions and requests to the Manufacturer
View detail
Essential items for vehicles with external exhaust system replacement
After replacing the Tornado Exhaust System with Mukawa's Tornado Exhaust System, the Master Cylinder of the Rear brake stood out. I didn't like the whitish look of the Master Cylinder, so I covered it up with a Master cupCover. It looks good. View detail