Reviews
Used for Tank on Ninja1000sx
[How is it used?
The tank of the Ninja 1000sx is wide, so when touring long distances, the sitting position is inevitably shifted to the front. When I was riding Z650ABS, I used the same manufacturer's standard (black), but I was concerned about the floating of the glue, so I changed to SILICON this time.
Was the one you received as per Image?
Color is Color:It is so close to Gray that when attached to Black Painting, it looks like it is floating. It is not so bad once you get used to it, but I would have preferred a stronger black look.
How was your experience with it?
Functionality is fine. It has a firm knee grip.
[Points to note]
The location of the paste is unknown and must be confirmed on the ManufacturerHP.
How did it compare to other products?
I feel that the texture is not as good as the company's Standard, but it is supple and does not seem to peel easily.
Requests, etc. to Manufacturer
I noticed a lot of White paper dust on the product when I opened the product. Perhaps dust from clothes will also be a concern in the future.
View detail
For Day Trip Touring
[How is it used?
I purchased this bag to hold my baggage for a day touring when I took delivery of my Ninja 1000sx.
Was the one you received as per Image?
The Large size and texture were exactly as shown in the Image.
How was your experience with it?
It is about 1/3 capacity with Rain Suit, Touring net, simple tools and small things.
It can be expanded with a fastener, so there is no problem when storing souvenirs, shirts, etc.
The top lid area is glossy Black, so abrasions will be a concern in the future.
[Points to note]
KBelt is convenient, but I am concerned that it will gradually shift forward when driving.
How did it compare to other products?
I used to use Single side bag for my hand luggage, so I have to be careful when I straddle it when I ride.
The drawback is that it is not easy to use, but I like the simple look of the product.
[Installation hang].
The center belt for attaching the KBelt must be tightened firmly when driving.
Note that it will shift forward.
View detail
Replaced with a reliable manufacturer's product for future Motorcycle tinkering.
[How is it used?
I used to use a tool sold at Home center, but I was licking the Nut and so on.
We purchased this product as a reliable manufacturer's product.
Was the one you received as per Image?
Matte texture, Laser marking and was as per Image.
How was your experience with it?
The dimensional accuracy is also no problem at all, and it is good to fit Snap to Nut.
Matte texture also fits well in the hand.
How did it compare to other products?
It is a world of difference from the inexpensive tools sold at Home center. A little more.
I regret not buying it earlier.
Requests, etc. to Manufacturer
When the tool box is stored upright, it is unstable because of the protruding hinges,
I would like to see a structure that does not stick out.
View detail
Purchased for my 3rd grade Small School son.
Was the one you received as per Image?
Coloring was as per Image.
[How did you feel about the Fit?
When worn by a Small School 3rd grader (135cm tall, slender), the sleeves and body length were too long, though,
I think they can be worn for many years even after some growth.
How was your experience with it?
I have purchased ANSWER Jersey before, but it frayed while I was using it.
It was coming out. We hope that will not be the case this time.
[Was there anything that disappointed you?
No problem except that the Size is Large.
How did it compare to other products?
I expect that the sewing and texture is better than FOX's Jersey, so it will not deteriorate over time.
View detail
Good texture
[How is it used?
Purchased at the same time as the 65-piece AutoMechanic set from the same manufacturer.
Was the one you received as per Image?
The Matte texture is pleasant to the touch and the Laser marking is very clear.
How was your experience with it?
There is no dimensional error and it fits Snap and Nut so it is safe to use.
View detail
It was possible to install on VSTROM250SX.
It was possible to install on VSTROM250SX. View detail
Body is soft and very easy to use.
Both the Frame and the Shield are made of soft resin, so they are very easy to use, and the Strap's elasticity is not too strong, so you can remove the Goggles. (Shift to the forehead part of Helmet) There is no time to be stumped.
The frame and PackingSponge are not very thick, so the fit in Single Body is high, but when worn over a helmet, I think the PackingSponge will not reach the face if the Jet helmet is thicker. However, I don't think this is a problem unless it is winter time. It does not adhere to the face, but there is a rubber lining on the inside of the Strap to prevent slipping, so it will not gap while riding. In fact, the pressure feeling is reduced, so you could say that it is an effect of the Plus surface.
Standard Equipment's Shield is [Color] Clear, [Color] Smoke (Black) Shield is also included. I'll get right on it. [Color] Smoke has been replaced with Smoke. To replace the Hook, simply remove the three Hooks, replace the Shield, fit it into the Frame groove, and fasten the Hooks.
[Color] The Shield of Smoke looks quite dark from the oncoming traffic side as shown in the picture, but not so dark from the person wearing it. Even if you enter Tunnel with it on, (I don't know how it would be in an occultic Tunnel with little or no lighting.) With a little bit of lighting, it was never pitch-dark and I could not see anything in front of me. Of course, it is not usable at night. (I've decided not to ride at night.)
I would appreciate it if you could sell just the Shield separately in case it gets scratched by insects, jumping rocks, etc.
View detail
Fits: SUZUKI V STROM 1050, SUZUKI V STROM 650
Purchased for Loading Hook
I purchased this for the installation of the Loading Hook.
I may replace the Blinker sooner or later, so I need one with Service hole.
It is well made
View detail
A must-have stand for circuit bikes
The bike I prepared for entering the circuit this time did not have a side stand.
I couldn't prepare a side stand, so I had to prepare it by leaning it against the wall.
When I looked at the products used by other players, I saw that they used a lot of JTrip products.
I also used JTrip for the front and rear stands. I bought it.
It seems thick and sturdy. I recommend it! -------------------------------------------------- -------- The bike I prepared for entering the circuit this time did not have a side stand. I couldn't prepare a side stand, so I had to prepare it by leaning it against the wall. When I looked at the products used by other players, I saw that they used a lot of JTrip's products. I also used JTrip for the front and rear stands. I bought it. It seems thick and sturdy. I recommend it! Powered by Google Translator
View detail
It's convenient, small and good.
I am currently using the center front stand.
The disadvantage is that it is bulky, heavy, and requires an adapter to be carried.
There is a risk of losing the adapter, so I ordered a stand that hangs on the fork.
First of all, it is very light and has little space. It's easy.
Very satisfied. I think I will only use this from now on. -------------------------------------------------- -------- I am currently using the center front stand. The disadvantage is that it is bulky and heavy and requires carrying an adapter. There is a risk of losing the adapter... so I ordered a stand that hangs on the fork. First of all, it is very light and has little space. It's easy. Very satisfied. I think I will only use this from now on. Powered by Google Translator
View detail
These are simple and nice gloves.
I ordered these gloves to simply use for commuting to and from work.
The overall material is cotton and mesh.
The areas that need to be protected, such as the back of the hand and the bottom, are thickly reinforced.
It seems to be a good product for light use.
It has a large mesh area, so it would be good to use in the summer. -------------------------------------------------- -------- I ordered these gloves to simply use for commuting to and from work. The overall material is cotton and mesh. The areas that need to be protected, such as the back of the hand and the bottom, are thickly reinforced. It seems to be a good product for light use. It has a large mesh area, so it would be good to use in the summer. Powered by Google Translator
View detail
An air pressure gauge is recommended.
I ordered an air pressure gauge to use on the circuit.
I usually use snap-on products. The price is very expensive and it is discontinued so it is difficult to find.
This product looks a lot like a snap-on.
When I actually used it on the circuit, it worked well and was easy to use.
The price is cheap and I recommend it. -------------------------------------------------- -------- I ordered an air pressure gauge to use on the circuit. I usually use snap-on products. The price is very expensive and it is discontinued so it is difficult to find. This product looks a lot like a snap-on. When I actually used it on the circuit, it worked well and was easy to use. The price is cheap and I recommend it. Powered by Google Translator
View detail
Nice touch - but problems for yourself
Installation is a nightmare. You have to remove your whole tail assembly except you subframe. The new undertray comes with battery slot, but misses some of the grooves required to route wire harness. Putting back the tank had challenges. Fitment is ok. View detail
Nice touch
Fit was good. Atech gave ample cushion strips. Use abundantly to avoid vibration. Installation requires the removal of the OEM tail pieces. 1hr job max. View detail
Large carrier
I thought about it a little bit and chose Taguega and Large Careers. First of all, the size, color, and color look pure.good View detail
MAGNUM is good
It's sound art. Size, color, and color don't come out. Korea chose this product because of noise regulations, but fortunately, it can pass. View detail
Fits: HONDA GROM125
Genuine Honda Front Indicator Assembly for MSX125 2017
This was purchased due to a small fall and the front and rear indicators got some damage. The correct part was a little tricky to find as the Honda schematics aer not perfectly clear, but I got the right one in the end. The original part number was now superseded to this newer version free of charge by Webike, so that was nice. The cost of the assembly was slightly cheaper than could be sourced locallly but the local dealer did not have this in stock. I also added a few other parts needed for this repair to my order and this meant the cost of shipped was good value. My orde rarrived in 5 days from being shipped and everything was in 100% perfect order. The indicator assembly came in the Honda box and was wrapped in a padded material. The assembly itself is well made and all the joints to the lens are spot on. The lens is crystal clear orange but looks amazing. The connector was kept safe too and it was just a plug and play fitment. Very pleased with this purchase. Thanks Webike. View detail
Prepare for the unexpected.
When I bought the vehicle used, it had been changed to an external Switch and did not have a Kill Switch.
At the time of purchase, I did not think the kill switch was that important, but when I understood the meaning of the switch, I thought it would be a good idea to put it on and decided to install an OEM kill switch.
What is Kill switch?
‥ A Switch that stops the required Engine when it is directly connected Wiring. →The one that forces Engine to stop.
And it seems that the Kill switch was originally equipped for Race vehicles.
It used to be a piece of equipment on Race vehicles.
The old 2-stoke racing machine etc. did not have a battery, but only the power generation function of the Engine, and since the Engine is started by “pushing”, it is not equipped with a Cell starter, and if it is for Race cars, it is not equipped with an Ignition key. The engine is not equipped with a cell starter because it has to be pushed & rdquo; to start the engine. This means that a switch”is needed to stop the engine at the end of the run, and that is the Kill switch.
In the case of racing machines, an important reason why a kill switch is necessary is that in the event of a fall or accident, the engine may not stop and the tires may continue to rotate, which would interfere with rider rescue and machine removal operations, as well as pose a risk of igniting leaked gasoline. There is also the danger of igniting leaked Gasoline. 。
In such an emergency, we needed a kill switch that could instantly stop the engine.
This is also the case for four-wheeled races, which are required to be equipped with a kill switch on the outside of the vehicle body so that the course marshal can stop the engine from the outside even if the driver is injured or otherwise unable to stop the engine.
It seems like a device to be used in an emergency state, but as a general Rider.
In what situations would it be used?
[Occasions of use.
→Motorcycle when it falls over.
When→Throttle system failure occurs.
and used in emergencies such as
As for situations where it can be used outside of an emergency situation,
Example:For example, at a toll gate on a toll road, if you stop at a toll gate and immediately stop the engine with the Kill switch while keeping the GEAR in first gear, you can remove both hands from the handlebar without emitting Neutral, making it easier to take out the wallet, etc.
→ To re-start, simply hold Clutch and press the Cell button to start the engine (this method is also convenient for long traffic light waits, etc., as it eliminates the need to exit Neutral).
2.Kill switch installation
It is recommended to spray the inside of the coupler of the Kill switch to be replaced with a contact resister for protection.
Pass the wiring of the Kill switch through the designated position.
How do I install Kill switch?
Remove (1) Seat and Side cover.
↓
(2) Remove the Minus terminal from the battery. 。
↓
(3) Plug in the Coupler of the Kill switch.
↓
(4) Tie Wrapetc. so that Wiring does not get tangled and SwitchBody comes to the RightHandlebar.
↓
(5) Tighten the screws at the bottom of the SwitchBody.
↓
(6) Connect the Battery with the Minus terminal disconnected, put back the Seat and Side cover, and finish.
Check the operation.
Kill switch note...
Note that if you forget to turn off the kill switch and turn off the ignition key when parking the car (i.e., leave the key on), the battery will run up.
If used correctly, it is a device that can avoid the worst in the event of an emergency, so it is safer to have it on.
View detail
Throttle pipe is easy to use.
[How is it used?
It is compatible with a wide range of big carburetors from NORMAL to PB16, PC20, and VM22, and can be easily converted to High Solo.
I am using it in a PB16 conversion of CD90 diversion.
Was the one you received as per Image?
Throttle pipe has TAKEGAWA stamp and grooves at the base to prevent slipping. The color is black, which is good for parenthesis.
Was the installation difficult?
It can be easily installed by simply replacing the NORMAL.
I use it with TAKEGAWA's Holder with Switch and it is Exactly.
How was your experience with it?
The Throttle pipe has been in use for more than 5 years without any damage and is durable enough, but the Grip has inevitably deteriorated over time.
[Included Parts:were they on?
No other than Grip, Throttle pipe, and Instruction Manual.
[Was there anything that disappointed you?
Nothing in particular, but if I had to guess, I would say that it is shorter than the general length of UniversalGrip, so I feel that a little longer would be better.
Many other companies' throttle pipes are white, and any gaps are noticeable, but this one is not noticeable and is a good fit.
View detail
Even if it's not a low-headed Bolt….
I purchased this to improve the hardness of the entry of Shift on my 2014 NINJA1000, which had been bothering me since I bought the car used.
Installation could be done without removing the Cowl, so it took only 5 minutes.
However, when installed with the supplied low head bolt, it does not interfere with the OEM change lever, but there is only a gap of about 1mm, which bothered me, so I installed a M6×10 button cap bolt with a lower head than the low head bolt to secure the gap.
Shift entry remains a little stiffer than before, and I feel that the shift feel has become tighter.
I wish it were a little cheaper because it is expensive for such small parts.
View detail