The best choice for waterproof bag storage

It was useful during long distance tours.
Since the rear seat of the Svartpilen is short and narrow, this carrier can stably hold a waterproof bag of about 40 liters.
The design is simple, so it doesn't look too distracting.
Both 1st and 2nd generation fillens can be used. -------------------------------------------------- -------- It was useful during long distance tours. Since the rear seat of the Svartpilen is short and narrow, this carrier can stably hold a waterproof bag of about 40 liters. The design is simple, so it doesn't look too distracting. Both 1st and 2nd generation fillens can be used. Powered by Google Translator View detail

It goes well with the 2018 Crosscub.

There are about 3 to 4 front carriers for crosscurves on sale, and I like them because they are just the right size and not too big.
Anything that is too heavy will affect the steering, so it is better to load a sleeping bag or light camping gear and it is convenient to tie it down.
-------------------------------------------------- -------- There are about 3 to 4 front carriers for crosscurves on sale, and I like them because they are just the right size and not too big. Anything that is too heavy will affect the steering, so it is better to load a sleeping bag or light camping gear and it is convenient to tie it down. Powered by Google Translator View detail

3 season pants

Daytona's winter fleece pants were worn very well. Now that the days are getting warmer, I was looking for pants for all three seasons and bought them because I liked the casual design and not-so-slim fit. Thin knee pads are included, and although it is unfortunate that the length is particularly long, I am satisfied. -------------------------------------------------- -------- Daytona's winter fleece pants were worn very well. Now that the days are getting warmer, I was looking for three-season pants and bought them because I liked the casual design and not-so-slim fit. Thin knee pads are included, and although it is unfortunate that the length is particularly long, I am satisfied. Powered by Google Translator View detail

It's cool

I wore the winter version of the same model very well. While looking at mesh gloves for summer, I chose them because I liked the design, which was not too sporty and was reasonably casual. It is excellent value for money, and because it is made of mesh, it is breathable and light. -------------------------------------------------- -------- I wore the winter version of the same model very well. While looking at mesh gloves for summer, I chose them because I liked the design, which was not too sporty and was reasonably casual. It's great value for money, and because it's made of mesh, it's well ventilated and light. Powered by Google Translator View detail

Chic Design Road Comet Fairing

The Road Comet fairing was perfect in every way, it was easy to fit and looks awesome. The 2 tone paint was absolutely spot on. Communication with WeBike was also very good. View detail

A really well crafted seat like no other currently available

About quality and texture - The custom seat from Petex is made using fiberglass for the seat structure and a synthetic tuck and roll material for the seat cover, the quality from the overall fit and finish is perfect. About the feeling of use - A really well crafted seat like no other currently available but the comfort is still lost when compared to the original Honda seat. The look of the seat is impressive and easily adds to the cafe look on the Monkey 125, especially with the rear end being moulded around the tail light. Products to buy together - If you are looking to enhance the cafe look, a product you may want to consider to purchase along side the custom seat is the belly pan available from Petex, that fills the open space below the engine perfectly. Difficulty of installation - The installation of the custom seat is a simple task that took 0.3 of an hour to complete. Some slight mechanical aptitude and the use of basic hand tools is all that is required to secure the custom seat to the frame. Cost performance and comparison with other products -I find the cost of all the products Petex sell to be higher then what most other companies sell their products for and the custom seat is no different, but this is due to the original design, quality materials and the high quality finish of their products. About shipping and packaging - With there being a significant cost difference between sea freight and EMS for the custom seat, I chose sea freight to put the saved money toward other parts. The part was extremely well protected while being covered in bubble wrap and surrounded with air pillows in a sturdy cardboard box. Any concerns, cautions, or advice when purchasing - Webike Japan is the first place I look to for all my motorcycle needs. From service parts to performance products and even motorcycle gear and apparel, Webike always seem to satisfy my needs in regards to availability and pricing. View detail

Genuine Yamaha Hose 5 for FZ1 2008

This was yet another part that is for the rebuild of the FZ1 2008 which was looking a bit tired with the almost 20 year old OEM parts. Although they were not particularly damaged, they made the bike look older than it is so new ones are essential. Finding the right hose was easy as I already had the Yamaha schematics for the previous pipes and hoses needed. The cost from Webike was great and far better than I could source locally. With the other parts I need for this rebuild in the same order, I saved a little on the shipping too which also helped. Via EMS my order was delivered in 5 days from shipping and was very well packaged and padded out so no damage was incurred. The hose 5 is a smaller diameter hose than the previous hose 1 I also purchased but it is also an inner braided hose as it needs to be robust and strong. The original bend fits perfectly with the pipes and along witht he clips I also purchased, the rebuild is cvoming along nicely. Thanks Webike, great job guys. View detail

Genuine G-Craft Suspension Hools (stand bobbins) for Honda Monkey 125

Whilst I was ordering the clutch cover for the Monkey 125, the customer asked to order a set of these stand bobbins too so it would be easier to work on the bike. Not a problem and super easy to find. The cost is ridiculously low and for what you get for your money a cool. Witht he other parts in my order, I got them all shipped together to save some funds and were all delivered in 5 days. The stand bobbins came in the shrink wrapped packet and were well presented. These do come in 2 parts so are pretty straight forward to fit together, then it is just a case of bolting to the bike. The quality of these look awesome and do look like they will last a fair while. I did have my doubts with the small bolts but they do seem to hold up well. No issues there. Very pleased with how they fit sand how easy they are to install. Thanks Webike View detail

kawasaki z650 plug

I am very happy to receive fast delivery of a plug that performs well. The price is also satisfactory. I am very satisfied with the fact that I trust the company's prompt processing and the price is reasonable.

The quality of the parts and bike protective clothing I had previously purchased was very good.
I plan to continue to pay attention and purchase good products.

I am happy that it is delivered quickly and without any significant shipping costs. -------------------------------------------------- -------- I am very happy to receive fast delivery of a plug that performs well. The price is also satisfactory. I am very satisfied with the fact that I trust the company's prompt processing and the price is reasonable. The quality of the parts and bike protective clothing I had previously purchased was very good. I plan to continue to pay attention and purchase good products. I am happy that it is delivered quickly and without any significant shipping costs. Powered by Google Translator View detail

Genuine Kitaco Exhaust Gaskets for SUPER CUB 50

These gaskets were purchase due to needing an exhaust change on the Super Cub 50 and I do not like reusing the old ones if at all possible. These Kitaco ones were reviewed well and so I decided to give these a try myself. The price for the gaskets was excellent and far better than buying the OEM ones which essentially do the same job anyway. I have used a few Kitaco parts before and they really are great quality. I did have some other parts in an order and everything arrived in 5 days from being shipped. The gaskets arrived in the Kiataco packaging and were spot on. No issues or problems and the specs were perfect too. Very pleased with this purchase. View detail

very good product

There are various engine guard products for the Rebel 1100, but this product is the most compact and seems to cause less damage to the car body when used.
The price is reasonable too
Installation seemed simple, but it was not easy to do alone.
Still, the paint condition and finish of the product are really good.
This is a very satisfactory product. -------------------------------------------------- -------- There are various engine guard products for the Rebel 1100, but this product is the most compact and seems to cause less damage to the car body when used. The price is reasonable too Installation seemed simple, but it was not easy to do alone. Still, the paint condition and finish of the product are really good. This is a very satisfactory product. Powered by Google Translator View detail

It feels so nice to wear

It feels so nice to wear I want to buy a few more I love the fit of the design. I would highly recommend it for offroad bikes. ^^ View detail

Best kit if you are looking to improve the clutch appearance and durability

About quality and texture - The reinforced 6 clutch disc kit from Kitaco is made from aluminium, steel and fibres with a lovely machined surface finish on the outer rim, the quality from the overall fit and finish is perfect. About the feeling of use - The reinforced 6 clutch disc kit would have to be the best kit if you are looking to improve the clutch appearance and durability over the original setup. Would have also been nice if all six posts had been drilled and tapped to accept the corresponding aftermarket clutch lifter plates. Products to buy together - A key product to purchase when upgrading the clutch system is a set of heavier clutch springs. There are varying degrees of aftermarket clutch springs available, just depends what suits you. Difficulty of installation - The installation of the reinforced 6 clutch disc kiti is an intermediate task that took 1.0 hour to complete. Some mechanical aptitude and the use of special tooling and basic hand tools is what is required to access the engine internals and assemble the clutch kit to secure onto the main shaft of the tramsmission. Cost performance and comparison with other products - I find the cost of all the products Kitaco sell to great value when compared to what most other companies sell their products for and the reinforced 6 clutch disc kit is no different. About shipping and packaging - With there being no significant cost difference between sea freight and EMS for the reinforced 6 clutch disc kit, I chose EMS for an earlier arrive date. The part was extremely well protected while being covered in bubble wrap and surrounded with air pillows in a sturdy cardboard box. Any concerns, cautions, or advice when purchasing - Webike Japan is the first place I look to for all my motorcycle needs. From service parts to performance products and even motorcycle gear and apparel, Webike always seem to satisfy my needs in regards to availability and pricing. View detail

ZETA Good Value

ZETA provides good quality at a good price and this oil drain plug has excellent anodising that is better than some more expensive brands. The most important thing is the magnet on this ZETA plug is very strong, so it will do a good job at catching debris etc. Apply a little grease before install... View detail

This rear suspension offers multiple spring options so everyone is covered

About quality and texture - The rear suspension from Ohlins is made from micined billet aluminium featuring a silver anodized surface finishe, the quality from the overall fit and finish is perfect. About the feeling of use - This rear suspension offers multiple spring options so everyone is covered for your weight and riding style. Obviously way better then the original units with there heavier rated springs and preload adjusting collars and the looks when fitted to the yellow Monkey 125 with it's matching gold front forks is the best. Products to buy together - The suspension on the Monkey 125 would have to be the worst part of this mini moto, so after the purchasing of this high quality rear suspension the essential product to purchase to complete your suspension upgrade would be the Ohlins front fork insert kit but sadly Webike Japan do not have this product available but you can purchase it from Webike Thailand. Difficulty of installation - The installation of the rear suspension is a simple task that took 0.5 of an hour to complete. Mechanical aptitude and the use of basic hand tools is what is required to secure the rear suspension between the frame and the swingarm. Cost performance and comparison with other products - I find the cost of all the products Ohlins sell to be higher then what most other companies sell their products for and the rear suspension is no different, but this is due to the high quality materials used and the consistent high quality finish of their products. About shipping and packaging - With there being no option for sea freight or EMS for the rear suspension, I had to chose FEDEX which is priced higher then I like to usually spend on shipping. The part was extremely well protected while being covered in bubble wrap and surrounded with air pillows in a sturdy cardboard box. Any concerns, cautions, or advice when purchasing - Webike Japan is the first place I look to for all my motorcycle needs. From service parts to performance products and even motorcycle gear and apparel, Webike always seem to satisfy my needs in regards to availability and pricing. View detail

SP Takegawa make it too easy to maintain their engine kits

About quality and texture - The piston ring set from SP Takegawa is made from steel with a heat treated surface finish, the quality from the overall fit and finish is perfect. About the feeling of use - SP Takegawa make it too easy to maintain their engine kits. The piston ring set contains what you need to freshen up this area of the engine without having to repurchase the whole engine kit previously installed. Products to buy together - A key product to purchase when freshening up the top end of the engine is a new gasket set as it is far from advised to reassemble this area with used gaskets. Difficulty of installation - The installation of the piston ring set is an advanced task that took 2 hours to complete. Mechanical aptitude and the use of assorted hand tools is what is required to disassemble this part of the engine, correctly fit to the piston and then button the engine back up. Cost performance and comparison with other products - I find the cost of all the products SP Takegawa sell to be on par when compared to what most other companies sell their products for and the piston ring set is no different. About shipping and packaging - With there being no cost difference between sea freight and EMS for the piston ring set, I chose EMS for an earlier arrive date. The part was extremely well protected while being covered in bubble wrap and surrounded with air pillows in a sturdy cardboard box. Any concerns, cautions, or advice when purchasing - Webike Japan is the first place I look to for all my motorcycle needs. From service parts to performance products and even motorcycle gear and apparel, Webike always seem to satisfy my needs in regards to availability and pricing. View detail

MORIWAKI Complete exhaust CROSS TWIN BLACK

Finally after a year of questions and doubts I purchased the MIORAKI muffler which for me is a marvel, a beautiful product with a deep sound compared to the original and above all aesthetics, what can I say I really like it, I recommend the manufacturer and the seller to all serious people who know what to do their work is very good. THANK YOU SO MUCH MIORAKI THANK YOU SO MUCH WEBIKE JAPAN ------------------------------------------- --------------- Finally after a year of questions and doubts I purchased the MIORAKI muffler which for me is a marvel, a beautiful product with a deep sound compared to the original and above all aesthetics , what can I say I really like it, I recommend the manufacturer and the seller to all serious people who know what to do their work is very good. THANK YOU SO MUCH MIORAKI THANK YOU SO MUCH WEBIKE JAPAN Powered by Google Translator View detail

Not very good

The paint on some of these has a bumpy texture, like the units weren't clean when the paint was applied. One of them had an electrical short upon installation which was popping my signal fuse. Luckily I had bought a spare. Installaton wasn't a big problem, but I wish they used thicker gauge of wire, it's very thin. Very inexpensive blinkers, but you get what you pay for. I wish I had spent a little more and gotten better quality blinkers. View detail

DIY is not easy, but it's a great product

This product does not impair the aesthetics of the bike and enhances the rigidity of the vehicle body. Mounting is difficult on your own, I recommend going to the maintenance shop. The shimmering of chrome makes the bike very stand out. If you wear this, your bike gets a different look than others. View detail

We recommend fitting this product.

Think about the flat front, It's not cool without this 'kawasaki' bracket. You can remind others what kind of bike I am anytime, anywhere. The downside is that the horn becomes smaller. But don't worry, our riders won't use their horns. View detail