Reviews
Purchased for personal use
[How is it used?
Purchased as an on-board tool for my motorcycle
Was the one you received as per Image?
KTC, so the texture is good and just like the Image.
How was your experience with it?
It fits with Snap and has good dimensional accuracy and can be used with confidence.
It is inexpensive, so it's great for personal use.
View detail
Used for Overhaul
Used on NSF100 front forkOH.
Essential Items for oil level adjustment.
The hose and syringe are sometimes easy to disconnect.
View detail
Wrist is tight when putting it on.
I saw in the Review that it is 195mm from wrist to middle finger, so I decided to go with M Size.
It is Exactly if you fit it, but it is narrow when you fit it….
It's fine for OffRace, but for Touring it's a hassle every time.
So I stretched it with a water bottle as shown in the picture! I'm glad I was able to fit it a little easier.
Also, the fabric is quite thin, so it is cold when the temperature is a little low.
I use Soar SpectrumGloves, so I thought they would be the same, but they are totally thin.
Soar is peeling off the Rubber of Protect, but it is firmly attached as expected of Alpinestars!
View detail
Simple.
Although 2Camera (front and rear) has become the norm for Motorcycle, we chose Front's 1CameraType.
I decided to go with 1Camera because the rear wiring is troublesome, and the 2CameraType's rear image quality is reduced, which is good for preventing agitation, but not really necessary.
Since 2Camera costs about 35,000 yen, just 1Camera is better than nothing.
I usually use an IPhone, but I couldn't connect to the app and couldn't tell if it was working or not, so I guess I made a mistake...
So I connected with Android and was able to see it (laughs).
View detail
Helmet and rain gear
I had been using a 26-liter round top case, but I felt that the round shape offered less storage space, so I purchased this 33-liter square top case.
Tour cross3 with Visor will fit enough +α to hold at least rain gear.
It is easy to lock the door without a key, but you have to be careful with the marker.
View detail
DriveRecorder for quality
Balance between price and performance (LED signals, nighttime images, front/rear shots, angle of view, etc.).
We chose this product based on our consideration.
Durability is undecided as we have just started using it.
View detail
I love it.
The Large is very good and I use it for Oil change trips.
There is no problem in particular, but if I may be so bold, it would be helpful if the paper could be folded easily.
View detail
I found it difficult to use myself.
Maybe I am clumsy, but I was able to apply it more neatly when working with FreeBand. If you are dexterous, this is a good product. View detail
I love to use it!
I use it when changing filters for the K67 model.
It is very easy and helpful to use Wrench when removing it.
I will continue to use it.
View detail
Accent
It looks different, but the work is a bit labor intensive.
It can be peeled off when you get tired of it, and it is a good price, although it needs to be degreased.
View detail
Best equipment for winter
Great product for winter. Easy to operate. Wiring was easy as it is pulled in from the brake. View detail
Windproof effect + does not destroy Style + makes cleaning easier
I have an OEMHigh Windscreen, but when I replaced the Helmet, the Wind Cutting noise became worse.
The wind was now coming from the upper half of the helmet, but if the Adjuster is raised to the Largeest setting, the wind is no longer coming from the helmet at all.
It is easy to install, and if the adjuster is lowered, it hardly disturbs the style.
It was also good to have space between the Screen and Bracket, making it easier to clean.
The disadvantage is that it is not possible to put something like a Screen Mounting Bar Holder between the Screen and Bracket due to the installation, and the price...
View detail
Although there is a high degree of freedom
The flexibility is high, but the number of mechanisms is large, so it can be a bit of a challenge to install without thinking about it.
Texture was appropriate for the price, and visibility was not much different from OEM.
With a single cylinder, there is a certain amount of vibration.
The hardness of the moving parts can be adjusted by you, giving you peace of mind.
View detail
Bolt
The Right Side fixed bolt is replaced with a new one.
It seems to have been changed to the alternative part number:64508-ML7-010, but the tightening part is still ? shaped.
I would prefer a ?-tightened shape.
View detail
exchange
Side cowl demountable bolt, replaced with a new one.
I would like to have a cross, but it seems that OEM new products are changing to -.
I hope they will change to Cross Type.
View detail
Fits: SUZUKI GSX-S1000, SUZUKI GSX-S1000F, SUZUKI GSX-S1000GT, SUZUKI KATANA
EFFEX Lowdown Kit
Even 2cmDown makes quite a difference in the sense of security.
Quantity:I think Set's STAND is also sturdier and better made than OEM.
View detail
Replace with new one
The installed product was out of date, so it was replaced.
I would like to replace all of them, but they are not that cheap, so I am replacing 1pc.
View detail
Replace with new one
This is a replacement along with Bolt replacement.
It is like thin Packing, but Wound-proof? Prevention of loosening? It is not cheap. It is not cheap.
View detail
OEM same etc.
No problems, same as OEM. This product is sufficient. No exhaust leaks. View detail
Large cuttings that keep the oil level.
I used it for an OEMcarburetor overhaul. 。
Parts inside Carburetor.
To put it very simply, it is like a float that floats in a Pool filled with Gasoline called the Float Chamber at the bottom of the Carburetor.
What is a Float chamber?
Float chamber means Float room. 。
A container for holding a certain amount of fuel that flows from the Fuel Pump. 。
In order to supply the proper amount of fuel to the main nozzle where fuel is being sucked out, the system uses a Needle Valve and Float to keep the liquid level at a constant height.
The role of Carburetor's Float chamber.
The ‥Float chamber plays a role like a Pool that temporarily accumulates fuel in the carburetor.
Fuel accumulated in the float chamber is mixed with air through the Slow Jet and Main Jet, and finally supplied to the engine as air mixture.
How does Carburetor's Float formula work?
The Float system is one of the fuel supply methods, and the carburetor has a dedicated space for storing fuel such as Gasoline called Float chamber, and a unique shaped float called *Float is installed inside this Float chamber. 。 The movement of the Float then adjusts the amount of fuel flow out to provide fuel for the mixture.
Float = component changed this time.
Float, however, is in constant contact with gasoline, so it will deteriorate. Deterioration seems to be inevitable, not just a cause.
As the Float deteriorates, the buoyancy of the Float decreases.
What happens when Float's buoyancy decreases? ]
Float will deform and lose buoyancy if it is exposed to Gasoline for a long time and deteriorates.
The valve may not close with enough force to stop the gasoline from flowing into the fuel tank, causing the oil level to rise above the standard level.
→Overflow occurs.
On the other hand, if the oil level of the carburetor is too low due to deformation, etc., the oil level of the carburetor will be too low.
The fuel mixture is insufficient to meet the fuel requirements, resulting in symptoms such as a thin fuel mixture or, in extreme cases, the inability to start the engine.
Continuously low fuel level puts a continuous load on the engine, which may lead to a risk of engine blowout. 。 It can give more serious Damage than high oil level conditions and should be treated with caution.
In other words, Float is →.
The function of keeping the gasoline oil level in the float chamber of the carburetor constant and supplying fuel.
[Causes of Float Deterioration]
Trouble may occur if the Gasoline in the Chamber is altered or the Float itself is corroded due to decades of aging or prolonged neglect since its manufacture.
→ In my case, it's been over 20 years since manufacture. I think deterioration is undeniable.
It seems to me that replacement is desirable at some point, especially at Overhaul.
I immediately disassembled and replaced it, but the Float I took out was discolored brown (laugh).
If I keep using it like this, it's going to melt.
I'm glad I had the exchange.
Although there are few cases where only a Single Item is replaced, it is one of the parts that should be checked every time a Carburetor is overhauled.
View detail