![icon-webike.png](https://gc-img.webike.net/@wid-shop/assets/desktop/img/icon-webike.png)
Reviews
![Helmet Lock](https://img.webike-cdn.net/catalogue/images/26336/303-1575_01_TS.jpg)
Fits: KAWASAKI Z125 Pro, KAWASAKI Z125 (16), KAWASAKI Z125 (16)
For Helmet, this is the one.
KIJIMA for Helmet lock
I already choose KIJIMA products no matter what kind of Motorcycle I ride.
The part to hang the helmet is easy to do and can be used for various helmets!
I'm glad I bought it because I'm worried that I'll have more keys but I'm not comfortable without it.
View detail
![Helmet Lock](https://img.webike-cdn.net/catalogue/images/27481/303-1576_eps_TS.jpg)
Feels like an OEM
The easy-to-understand Instruction Manual makes it easy for even beginners to install. It is a little regrettable that the locking body is fixed to the bracket by a single screw. View detail
![Helmet Lock](https://img.webike-cdn.net/catalogue/images/38521/303-1582_01_TS.jpg)
Helmet holder
Installation was easy with a single Hexagonal Wrench.
There seems to be a Holder under the Seat, but it is not available when the Bag is secured, so I am satisfied.
View detail
![Helmet Lock](https://img.webike-cdn.net/catalogue/images/46462/KTM-05005_01_TS.jpg)
Casual as if in NORMAL condition.
The fit is as if it were there in NORMAL.
Helmet lock is not to be placed over Mirror or on the ground because I don't want to put it on the ground.
This is equipment that should not be omitted.
View detail
![Helmet Lock](https://img.webike-cdn.net/catalogue/images/52895/303-1593_TS.jpg)
Fits: HONDA CB125R, HONDA CB250R, HONDA CB650R, HONDA CBR650R, HONDA CB150R, HONDA CB300R, HONDA CB150R, HONDA CB300R
Required Equipment
The CBR650F OEM Helmet Holder is a type that hooks onto the protrusion of the Rear Sets.
To put it bluntly, it's hard to use!
As was the case with the CBR250R, this kind of OEMSpec. requires the Seat to be removed to hook up the Helmet every time.
The CBR250R has separate Rear Sets, but the CBR650F has all-in-one Rear Sets, which is a huge hassle.
It is also obvious that wireetc. hooked under the Seat will eventually rub off and peel off the cowl, and in fact, it did on my CBR250R.
On the other hand, this product is attached to the Tandem Footpeg section, so it is easy to use and there is no damage to the Cowl.
No matter how you use it, it is essential equipment.
View detail
![Helmet Lock](https://img.webike-cdn.net/catalogue/images/28777/303-1579_01_TS.jpg)
Fits: HONDA ADV150, HONDA glom, KAWASAKI Z125 Pro, HONDA PCX125, HONDA PCX150, YAMAHA MAJESTYS, YAMAHA BWS(BWS), YAMAHA BWS125(BWS), KAWASAKI Z125 (16), HONDA ZOOMERX, HONDA DAX125
I challenge you to use this Helmet holder with an OEM key 1 pc!
I found a story on the Net about buying this product and modifying it so that a helmet holder can be used with a Motorcycle OEM key 1 pc. It was a dream come true, as I could use only 1 pc of the OEM key by removing the back screw of this product, pulling out the key cylinder, and shaving it a little. I didn't want to have many keys if possible, so I took out the key cylinder and tried to open the helmet holder with only one OEM key …. I had to shave the mouth of the hole or the key itself. I tried for 10 minutes with a file, but it was too hard and I couldn't sharpen it.
After all we have no choice but to keyQuantity:I now have 2 pcs. Also, I really did not want to put it on Handlebar, but I had no choice but to put it on Handlebar. The result is somewhat disappointing.
I have another HS-1, so I will try again with that one when I get back from Motorcycle shop.
By the way, this product itself is well made and there is no problem at all. If I may say so, I don't like that the shape of the bracket attached to the handlebar is not rounded but rather angular.
View detail
![Helmet Lock](https://img.webike-cdn.net/catalogue/images/38521/303-1582_01_TS.jpg)
Convenient!
Easy-to-use helmet holder.
Installation is done with Tandem Footpeg Screws in Quantity:It is easy to remove 2pcs.
I recommend the Holder because it is in just the right place and easy to use.
View detail
![Helmet Lock](https://img.webike-cdn.net/catalogue/images/46462/KTM-05005_01_TS.jpg)
Installation complete
Between Tandem FootpegBracket
It was easy to install because it felt like it could be sandwiched.
I was worried about Helmet.
Installed and secure.
Touring is available.
View detail
![Helmet Lock](https://img.webike-cdn.net/catalogue/images/27481/303-1540_TS.jpg)
You should put it on.
The helmet lock originally attached to the vehicle body is honestly useless, so it is better to attach a helmet lock from the perspective of preventing helmet theft.
However, if the Swing Arm is dirty, the Helmet may get a little dirty.
View detail
![Helmet Lock](https://img.webike-cdn.net/catalogue/images/42393/303-1588_1_TS.jpg)
V-STROM250 essentials
Installation
Some force is required, but it was installed without any problems.
It is easy to work with.
How was your experience with it?
Used for 4 years, no corrosion or malfunction.
It will be used for a long time.
Helmet can be installed even when OEMPannier is installed.
There is no problem with the strength of the key.
View detail
![Helmet Lock](https://global.webike-cdn.net/photo/impression/78/784532832f20262f2d27cfeda06d7639L.jpg)
To get a little peace of mind.
[How is it used?
I installed it because my motorcycle vibrates a lot when I start it up, and also to give me a little peace of mind when I am away from my motorcycle while touring etc.
Was the one you received as per Image?
Image Street.
How was your experience with it?
The lock is a special part and looks like an OEM helmet lock.
I am thinking of removing the Rear frame and I am wondering if it will touch the Exhaust System. I am thinking of removing the Rear frame in the future, so what do you think?
[Points to note]
I am also a beginner, but it was easy to install.
Tools required are
・Phillips Screwdriver
Torx wrench
Allen Wrench Sets
Screw lock agent
How did it compare to other products?
I have not tried other companies' products, so I can't say…
I leave motorcycle maintenance to the dealer, but I wanted to do a little myself, so I installed it myself this time.
It is easy to install, even for those who do not know where to start, so it is recommended for beginners only.
View detail
![Helmet Lock](https://img.webike-cdn.net/catalogue/images/42393/303-1588_1_TS.jpg)
OEMPannierQuantity:Required for Set
The OEMPannier top case does not fit a full face helmet, so a helmet lock was a must.:Those who have installed Set are recommended to purchase it. View detail
![Helmet Lock](https://global.webike-cdn.net/photo/impression/c2/c2a3a33d6497fb54a326189947bdeff7L.jpg)
Fits: TRIUMPH BONNEVILLE T100, TRIUMPH StreetTwin, TRIUMPH SCRAMBLER
![jp](https://gc-img.webike.net/@wid-shop/image/flags/jp.gif)
It is something that is attached as a matter of course.
If something that is normally taken for granted is not included, we want it, as a matter of course.
It is the fulfillment of that desire.
The large size can be installed as long as it fits at the round Pipe.
Even if the Large size does not fit, it can be managed with Small processing.
The feel is OEM-like and convenient.
View detail
![Helmet Lock](https://global.webike-cdn.net/photo/impression/67/67ecb84e80443da8edc3f56e6f65dfa4L.jpg)
Installed on GSXS125
I installed it on my GSXS125. the OEM helmet lock is on the tandem seat and it's hard to put the helmet on and a pain in the ass. I bought this lock because the OEM helmet lock is on the Tandem seat. I used a long M6 Hexagon Bolt I had at home and a Nut to hold it from the reverse side. The bolt was very secure. It is easy to install, even for a woman, because only one bolt is needed. I'm not sure about the durability yet, so I'm giving it 4 stars. (???) View detail
![Helmet Lock](https://img.webike-cdn.net/catalogue/images/27481/bm-05007_TS.jpg)
Fits: BMW R1200R, BMW R1200RS, BMW R1250R, BMW R1250RS, BMW S1000RR
![jp](https://gc-img.webike.net/@wid-shop/image/flags/jp.gif)
Helmet lock
I purchased this product because my car does not have a helmet lock.
This allows you to leave Helmet at ease when stopping for long periods of time.
View detail
![Helmet Lock](https://global.webike-cdn.net/photo/impression/f4/f466eab833b762828840da14085ac9ecL.jpg)
OEM
I am satisfied with the quality etc. No problems at all and the installation was done like OEM.
What I'm interested in is that Key is Quantity:2pc. I'm just there because it's a Set. I know that everyone is using one key, but since I don't use it often, I just use the different keys.
View detail
![Helmet Lock](https://global.webike-cdn.net/photo/impression/b2/b2b87d8c396124f18479c47b23dbce1bL.jpg)
Installed on 2022 model
Installed on a 2022 model.
It works fine
I was not sure about Babyface, but I think this one is easier to hang the helmet on.
I was satisfied with my purchase.
View detail
![Helmet Lock](https://img.webike-cdn.net/catalogue/images/35363/HTR-05006_TS.jpg)
Fits: TRIUMPH BONNEVILLE T100, TRIUMPH StreetTwin, TRIUMPH SCRAMBLER
![jp](https://gc-img.webike.net/@wid-shop/image/flags/jp.gif)
I can't install it
Compatible car models at the time of purchase include 16-" I bought it to put on my '16 Flat truckPRO because it was listed as a SCRAMBLER for the '16 Flat truck.
When I looked at the Instruction Manual, I found that there was something wrong. 17y-SCRAMBLER It was written.
Too bad, this is what you get when you buy on the Net.
View detail
![Helmet Lock](https://img.webike-cdn.net/catalogue/images/27481/303-1562_TS.jpg)
Fits: SUZUKI GSX-S1000F, SUZUKI GSX-S1000, SUZUKI GSX-S1000F, SUZUKI GSX-S1000
![jp](https://gc-img.webike.net/@wid-shop/image/flags/jp.gif)
For GSX-S1000, it is difficult to use…
The mounting position is OEM-like and very SMART.
When installed on a GSX-S1000, the Tandem Footpeg is large and protrudes outward, and although an ARAIHelmet is used, the D Ring must be pulled strongly to hang it, making it very difficult to hang.
It would be better to use the company's Helmet Lock Assist in conjunction with the Helmet Lock Assist to avoid feeling Stress.
This is not to say that this product is bad, but rather that the ease of hanging may vary depending on the type of car, which is why the evaluation is divided.
View detail
![Helmet Lock](https://global.webike-cdn.net/photo/impression/2d/2d716e86125083202b44be228b3569f7L.jpg)
It will be attached to GSX-S750 (2021) as it is.
I bought it because the AGRASHelmet lock listed GSX250R as well as GSX-S750, so I thought KIJIMA would be attached as well. (AGRAS is expensive).
KIJIMAHelmet lock for GSX-S750, also in Manufacturer's official Out of stock. I couldn't find any in stock at mail order site with the description. If you are planning to buy GSX-S750, please refer to this page.
The footpeg was co-tightened with a screw lock and tightened at 20 Nm.
The reason for the 20Nm is that GSX250R had such instructions in the Instruction Manual. Then, I thought GSX-S750 should be the same.
I am glad to know that GSX-S750 has few Other Brand Products and many manufacturers are out of stock.
View detail