Reviews
An unlikely product!
[How is it used?
All OK for everyday use!
Was the one you received as per Image?
Beauty is better than Image, and the price is right!
Was the installation difficult?
Simply tighten the bolt!
How was your experience with it?
I was able to eliminate the fear that the cable might deteriorate due to the friction of the tire.
[Included Parts:were they on?
Bolt for tightening is included!
[Was there anything that disappointed you?
I don't have it in my possession, but I would like to have the instruction manual.
Other items that would be helpful
Installation points and hang/Availability and clarity of the Instruction Manual/Points to consider/Items to purchase/Opinions and requests to the Manufacturer
I have the impression that Freak's Pit has a variety of products, many of which I personally think look custom, and if there is a product that tugs at my heartstrings, I'm willing to give it a try.
View detail
It looks good
The Exhaust Guard is fixed to the Exhaust Band, so it was difficult to align the Exhaust Guard and had to be removed and reattached 6 to 7 times. (It's a hassle.) Coordination.
There was not enough heat seat to cover the entire surface, so I applied the heat seat on the main side of the pipe, which is hotter.
It was installed without modification, but there is interference with the catalytic converter, so if you are concerned about this, you will need to shave it down or do other work.
View detail
To remove ACC power from VST250SX...
I used it on a DL1000 V-STROM250SX to take out the ACC power for the DRA RECORDER.
I'm sure it will be listed eventually, but DL1000 V-STROM250SX is not listed as a compatible car model, but it was usable.
It would be nice to be able to get ACC power just by inserting it between the Connectors without damaging the existing Wiring.
View detail
Durability of Dial formula
The lid of the Dial under the Right Side came off less than a year after purchase, which is a shame because the Boots themselves are well made and have a good spec. feel. The size is the same as normal use, but there was no problem. The walking feeling was not hard and it was not hard to go down and walk around. View detail
Fits: KAWASAKI Z900RS SE, KAWASAKI Z900RS CAFE, KAWASAKI Z900RS
A little disappointed.
The design is great, but long touring is a pain in the butt for me personally.
As a result, I purchased DAYTONA's Gay Lupinz.
View detail
Used for XELVIS No accuracy problems
Used for Honda/XELVIS.
NTB is about 1/3 of the price of OEMSeal which costs about 3,000 yen, but the rubber parts are not so low quality, such as BALI, distortion, etc. They are the parts that will meet your needs to fix the fork oil leak or to refresh the suspension.
However, since the smoothness of Stroke is considered to be the same as that of OEM, there is no performance upgrade, as in the case of SKF, which is famous for Race. The best feature of this product is its cost performance. Also, Dust Seal is the same as Quantity Seal.:Set
As for the installation information, XELVIS had an Inner Tube diameter of 35mm and an Outer inner diameter of 49mm. The length of the pipe should be about 60 cm.
Also, if you are not too careless with your hands, I think it is Large sturdy, but if the seal is facing the wrong way, it will pump up the oil. As shown in the reference photo, the printed side is on the top. You can also tell by the beveled edge on the top side. Please be sure to make a mistake!
View detail
2023 BMW M1000RR Not for installation
[How is it used?
The BMW K66 M1000RR 2023 cannot be installed because the RearSwing Arm is different from the previous shape.
Perhaps it could be installed on a 2023 BMW S1000RR.
Was the one you received as per Image?
I think it looks good.
Was the installation difficult?
Can not be installed
How was your experience with it?
Not available
[Included Parts:were they on?
Necessary because there is no
[Was there anything that disappointed you?
all
Other items that would be helpful
Point of installation and hang x
Instruction Manual (English description)
Ease of understanding x
Note:Included Parts:are not included and must be purchased.
Items Included Parts to be purchased together:.
Opinions on Manufacturer
Requests Cannot be installed on BMW K66 M1000RR 2023.
I would like to see a product that can be installed.
or color (Spenser) I think it would be a good idea to serve the
View detail
No Color, comparable to OEM Product.
After a while after engine OH, oil seal on Generator side and seal on StatorMount started leaking, so I replaced them.
The OEM oil seals that started leaking have only been used for 6 years and 10,000 km since the last OH, and I've treated them with care, but it happens.
The thing itself could be installed without any problems and the leakage was contained.
At the time of purchase, it was much cheaper than OEM, not to mention cheaper than buying a UniversalOil seal, so I was worried.
Not only for OH, but also for normal use, the leakage will suddenly appear one day, and since it is easy to replace, we recommend Stock as a precaution.
View detail
Expect durability!
The summer Gloves I had been using had torn.
The last Gloves I used were also Five, but the fabric on the palm side was weak and could not be used for as long as I had hoped.
I am a little excited about this product because the palm side is like leather.
The operability, design, and quality are quintessential Five.
Cospa is not bad considering this high cost of living.
View detail
Fits: KAWASAKI ELIMINATOR 400, KAWASAKI ELIMINATOR 400SE
Recommendation for volume and sound quality purposes
I don't know about the output, but the sound has changed considerably.
Not so much immediately after installation, but after driving for a while, it becomes quite powerful.
View detail
It's not just a board.
The image doesn't show much, but it is quite thick, which explains the price.
It is hard to imagine with a Single Item, but when installed, it is a Match.
View detail
Cheaper than OEM
I bought this one because it was cheaper than OEM.
There are no exhaust leaks and no problems.
View detail
A bit pricey, but worth the investment.
Used for '09 Yamaha wr250f.
Clutch WireMaintenance was frequently performed with Bell Hammer, so the lightness was only slightly lighter, but the semi-clutch area was expanded and control became easier.
Also, it is very good that the Lever play does not change when the Handlebar is turned off and the Meet Point remains the same.
The weight of Lever's pull is not habitual and is always constant.
Leaving Lever (Connecting Clutch) Control at will in
On the flip side, Demerit is a point that is difficult to understand in the sense of Lever even if Clutch is Heat.
But there was a synergy with ClutchBody's Setting.
Since Lever is light, I don't feel like my arm is going to go up even if I apply it all over the place with one finger and a half cradle.
One personal disappointment is that the external Lever for HYMEC 167 is
I can only find about ARC and the shape of the attached Lever does not fit very well, so I will try to accommodate this by shaving it off.
Durability will be confirmed after use.
I can also get Repair Parts,
Installation is easy and I am glad I bought these parts.
View detail
Ideal for NAKED's Engine area!
As per the Title, it is ideal for cleaning around the Engine of Naked motorcycle!
I have been driving a GSX1400 motorcycle for 16 years. The front side of the engine is hard to clean because of the oil cooler, exhaust pipe, oil line, and oil filter, and I have half given up on cleaning it.
However, I didn't want to leave it like this, so I was looking for something better and found this.
I purchased this product expecting it to work as well as it looked, but it was even better than it looked!
The size is a little large and the core wire is hard, but that is good!
A 1400cc straight-4 Engine is wide, and being wide means that it takes a certain amount of force to shove Brush into it and scrub it.
LargeSize and hard core were exactly Exactly for my use.
Also, the core Wire is not very thick, so it will properly fit into the gap.
After washing the car using DAYTONA's Shampoo in combination with this, Engine has regained the beauty of its original black paint!
This is highly recommended for those who want to keep Naked motorcycle's Engine appearance beautiful!
View detail
Fits: HONDA gorilla (Gorilla spp., esp. western gorilla, Gorilla gorilla), HONDA monkey
Partially made of Steel, it is prone to rust.
[How is it used?
The Normal pedal was a bit tasteless, so it was attached to the Brake pedal version up.
Was the one you received as per Image?
The size was larger than expected and easy to step on.
Was the installation difficult?
Install the Normal brake pedal so that it is sandwiched between the Normal brake pedal.
Plus screw allows installation with a single Driver.
How was your experience with it?
The driving operation is easier because there is more area to step on.
However, it took some time to get used to it because of the slight increase in height.
[Included Parts:were they on?
Mounting Screws, Mounting Hardware, etc.
[Was there anything that disappointed you?
Body is Material:Aluminum, but the Plus screw and the bracket on the reverse side are rusted with steel. Especially when the Plus screw is rusted, it is difficult to remove it.
▼This is a common design, but you can enjoy a slightly Mischief atmosphere.
I think the discomfort during operation depends on the person.
View detail
Fits: HONDA DAX125, HONDA MONKEY125
Is it essential in modern times?
Good product
When you live a life where your phone is indispensable, battery is always a concern.
The USB port gives me a sense of security.
If you read the Instruction Manual carefully, I think it is gentle as a work S-Kill.
However, it is necessary to pay attention to the removal and installation of the light cover (plating parts) and the fit of the wiring.
View detail
Shape differs from the photo shown!
The photo shown here differs from the photo of the item sent to us.
The photo shows a slightly angled one with a split center, one side was Straight, so I bought it, but the one I sent is 90° right-angled, and the other side is a slightly slanted shape, which is totally different.
Only the color is the same in purple, Material seems to be resin and scratch resistant and looks good, but the shape is different from what I wanted. The price is not good.
View detail
It becomes more KATANA-like.
The OEM screen is small, but if you install YOSHIMURA's WINDArmour, it will improve the parenthesis even more.
The production is also as expected of YOSHIMURA, and is so matched that it would be fine if it were OEM.
I also feel that the wind is not affected by it.
View detail
Good!!!!
I bought the High seat because the original Seat was too low, but I am glad I bought the Large seat because I could feel the change. View detail
substitute for an another
I bought this for a replacement for a plastic hammer that had a scratch or dent on the head. View detail