Reviews
Necessary items to connect to Air cleanerBox
Not necessary if no Air cleanerBox is available or cannot be connected. View detail
Fits: HONDA CROSSCUB50, HONDA CROSSCUB110, HONDA CT125, HONDA DAX125, HONDA GROM, HONDA CB250R, KAWASAKI Z650RS, HONDA CB125R
I should have made a different color... (This is my personal opinion)
The texture is indeed that of a MORIWAKIE Engineer.
You can see that it is carefully made.
As mentioned in the title, this product is available in Silver and Black.
When choosing between these two colors, I had a hard time deciding between them.
I chose Silver because the texture of Silver looked good and the price was a little cheaper, referring to the pictures of other wearers.
When I opened the product from the box and saw the actual product, I felt the texture was very good.
The actual installation can be seen in the picture, but my personal impression is that it is a little conspicuous for me, who likes to customize casually.
I will keep it attached for the time being, but am considering whether to replace it or Paint it....
The installation process was very easy.
Even a Custom novice like myself had no problem installing it.
View detail
Cost-effective and satisfactory there.
[How is it used?
Replaced from OEM
Was the one you received as per Image?
Everything that was in the picture was there.
Price is reasonable. A little dissatisfied with the texture.
Was the installation difficult?
Difficult for beginners.
Blinker, I struggled to remove the WiringConnector on the Tail lamp.
How was your experience with it?
It is more Refreshing than OEM.
Some of the OEM Fender is still there, so there are different tastes.
[Included Parts:were they on?
It was attached.
[Was there anything that disappointed you?
A little dissatisfied with the overall texture and the texture of the License lamp.
Other items that would be helpful
Installation points and hang/Availability and clarity of the Instruction Manual/Points to consider/Items to purchase/Opinions and requests to the Manufacturer
View detail
Fender Eliminator
The installation was not difficult, and I like the fact that the OEM license plate light is used! View detail
It can be used for everyday wear.
I wore it and ran early in the morning in early April.
I wore a long T-shirt underneath, but it was 8 degrees Celsius, so it was cold.
It is thin and allows wind to pass through moderately.
I like the design.
good point
It is comfortable to use in everyday wear.
It is very lightweight even when fitted with Protector.
The lining is Mesh so it won't get stuffy and is easy to put on and take off.
The simple design will suit a variety of car models.
What's on my mind
The fabric is thin, so when driving over 100km/h, the arm section flops around and makes my arms itchy. I'm a skinny guy, so people with thick arms won't mind.
Fastener on the sleeve is hard to close (squishy and hard to close)
The outer fabric is rough and a bit cheap.
The Protector that comes with it is squishy and not very reliable. (It is light, so it is used as it is.)
View detail
Even if it looks good….
I noticed after I bought it that it looks good, but it doesn't have a Level gauge! I like the look of the Parenthesis, but I'm not sure if it's a good idea.
When we check the amount of Oil, we'll see if there's a problem with the replacement.
View detail
A little tight.
I am 171cm tall, 52Kg skinny, and S Size is a little tight. It is not so noticeable compared to the external type, but I think I could have used a medium size even if it was a little gapped. I wonder if the rubber will stretch and get used to it as I use it. View detail
RnineTPosition improvement
Slightly improve Position.
The only thing I was concerned about was the width of the handlebar, so I decided to replace the handlebar to make it even more effective.
View detail
Reasonable。
I replaced the Large size scratched by a stepping stone. View detail
Compromise and purchase
To prevent dirt around the exhaust pipe and puncture of the rear wheel
I would like to extend the Rear of the Front Fender,
While there are only a few compatible parts for 400X,
We finally decided on this product.
Ideally, the product would be sold as a whole Fender, or it would be able to be inserted into an existing Bolt fixed to a Fender.
Before purchasing this item,
We have found a product made by Large land of Bolt On.
Naturally, I was worried.
I inquired about the possibility of installing it, giving the year and model,
The immediate response was that it could be installed,
I bought this one immediately in response to my feelings,
Size did not match at all (laughter).
I will return the product and I will be able to use this product as a Large.
I have purchased the product.
As for the installation, first of all, why did it take so many different shapes?
He said he would probably use double-sided adhesive Seat.
I was wondering for a while if there might be a reason for this,
My 6 year old son was nearby during the installation process,
While making the sticky Seat resemble the face of Pokemon's Character, we flopped it together and pasted it onto the Fender in a harmonious manner.
Plastic screws were included in the package for drilling holes in the Fender and attaching it to an existing Fender,
The thickness of the seal was such that it would not be possible to reach the reverse side using the same screws, so for the time being, only an adhesive seal was used.
Although I am concerned about the adhesive strength, I have used it about 250km round trip including high speed touring×4 times, and so far there has been no dropout, wobble or cracking, but I will do the Screw hitting treatment soon.
View detail
Perlu banyak penyesuaian lagi di new ninja 2021 saya kira sama dengan ninja 400 View detail
Probably good.
To be honest, I don't know how effective it is because I installed it right away on a used JA07 that I bought used.
However, it is a Motorcycle with over 10,000 km, so it should be getting better.
View detail
It's harder to miss.
Although it is hard to come off, the tip is sometimes interfered with when shifting.
I'm careful not to get Habit on it.
View detail
Second car inspection
On the second inspection, I brought a NORMAL one with me just in case.
Vehicle passed inspection.
Maybe it depends on the workers?
View detail
AFAMAfamRear spokeROCKET (Steel)
I was looking for a Steel spot ROCKET that can be used with GSXR110 Wheels.
I think they will last longer than the ones we used before.
Unfortunately, it is Painted.
View detail
Fits: YAMAHA SR400, YAMAHA SR500
Tuning premise.
I have now switched back to OEM exhaust pipes, but for a while I used these Stainless Steel Exhaust Pipes.
We hope this will be helpful to those who are going to customize their own products,
There were good and bad parts and I would like to make an IMPRESSION.
Exhaust pipe
The exhaust pipe is a pipe that connects the engine to the silencer, and it is expected to reduce weight and increase power in a large range. 。 The exhaust pipe is also changed so that the stress-up effect is even higher.
Effect of external exhaust pipe
‥
◎The exhaust from the engine is smoothly guided into the air by the large engine. It plays an important role in adjusting exhaust efficiency.
◎Lightweight. OEM is Steel, so it is also heavy. On the other hand, Stainless Steel and Titanium can be made lighter in large widths. Weight reduction also has advantages, such as making corner rings easier.
Large bank angle expansion:While the OEM is horizontal, the external model is angled, either Large or Small, so the bank angle is deeper than the NORMAL model.
This is Peyton Place's Stainless exhaust pipe,
【good point】
The exhaust pipe has a straighter structure inside, so the sound is more powerful. The sound is large but high because it is made of stainless steel.
Power up at high rpm is possible depending on the combination of ◎carburetor and exhaust system.
The color of the exhaust pipe curves is beautiful.
◎Stainless Steel, so it is corrosion resistant and lightweight. You will feel the difference.
[Bad point]
It may not pass inspection because it is ?Straight and has no catalyst. It did not pass.
Power up is not expected.
?Low speed Torque is considerably reduced in exchange for high RPM bower.
Naturally, there is Merit and Demerit.
I would like to write my past Spec. and impressions.
Normal cab + Corresponding exhaust + Peyton Place exhaust pipe
The sound is a bit louder, but I don't notice any particular effect. After Fire is often seen. I don't need to change the setting all year round.
(2) Normal cab + Japanese Vehicle Inspection Correspondence Non-Corresponding Exhaust + Peyton PlaceExhaust pipe
The sound is quite loud, and when the carburetor setting is applied, it turns beautifully up to high rpm, but I don't feel a sense of power. The carburetor setting is very good. The carburetor setting is a little bit gapped when the season changes. It becomes darker in the rainy season.
FCR Carburetor Body + Japanese Vehicle Inspection Correspondence + Peyton PlaceExhaust pipe
Power feeling is the same as (2).
Setting is fine-tuned for each season.
FCR Carburetor Body + It does not correspond to Japanese Vehicle Inspection + Peyton PlaceExhaust pipe
→Low speed Torque is definitely down. But Response and acceleration from mid to high speed is very good.
Setting needs to be changed ? fine-tuned→◎ each season.
Maybe the Straight structure of the exhaust pipe is more for racing than for public roads.
On the other hand, if the engine power is strengthened by bore up, etc., and the carburetor is made high performance and combined with a good exhaust system, it may be possible to have a great experience.
However, I am not sure that it would be easy as it could be quite Delicate in character of the body.
In my case, my riding style changed and I changed to a style of driving slowly and attacking mountain passes, and the carburetor setting became annoying and troublesome, so I returned to OEM exhaust pipes.
However, the exhaust pipe here has a high "dress-up" effect, so I think it will give you a great visual effect. Also, depending on the combination, it can be used to increase the power of the car, so I think it will be very interesting.
The combination of FCR Carburetor Body and external exhaust system made me think that SR400 is such a motorcycle. I was under the illusion that SR400 is such a motorcycle.
View detail
The packaging is, sadly,..,
Since Impression was well received, I was excited to purchase this one for myself.
Since I had just replaced the Brake fluid myself not long ago, I also replaced the pad myself.
I have been using Copa Slip to stop squeaking and this time is no different.
The Front of SEROW250 with DAYTONA's HYPERSintered was incredibly scary at first, even on the street, so I set out for a test run with a lot of caution, but it worked there and gradually got better and the break-in period ended after 15 km.
I look forward to Fee Rings at the next and subsequent Tourings.
My only disappointment is the packaging.
Does the Vesrah factory do this kind of packaging?
It arrived in a thin, bag-like Cellophane with a base paper and pad.
Go in, or rather, you can imagine what would happen if you put something that hard and heavy into a Cellophane bag.
The bag was torn, and when I unknowingly took it out of the box, the contents fell down with a thud.
It's hard to believe, but it's true.
And I wanted them to be shipped at least GRUGRU wrapped in plastic wrap,
And if they were put in a box by Webike! I wanted to make sure that measures were taken to prevent the contents from coming out,
If the packaging is this fragile at the time of shipment from Manufacturer, I can only assume that it was torn when it arrived at Webike! I suspect that it was torn when it was delivered to Webike!
Anyway, that makes me feel bad.
There are no scratches on the product and the performance seems Large sturdy.
I would have given it 5 Stars if it ran to some degree and I was satisfied with the Fee Ring, but I gave it 3 Stars due to packaging issues.
View detail
Extremely common products
The Vinyl bag, which was only slightly touched by the residual heat of the exhaust pipe, melted and leaked waste oil when it was tied up with the tie wrap. It would be appreciated if you could change to a Vinyl bag with higher heat resistance.
Into
View detail
I used it with FCR Carburetor Body28.
It is for vm26, but I changed the Spigot and used it with FCR Carburetor Body28.
In the case of CHALY, you need to engage a 6mm Spacer made by GCraft or Minimoto under the Manifold or it will hit the Frame.
As a precaution, the inside of the Manifold should be cleaned well before use.
The Manifold I bought had visible Level chips on the inside.
View detail
incomprehensible
Instruction Manual is too complicated and difficult for beginners. I think some knowledge is necessary. View detail