Reviews
Fits: HONDA CB125R, HONDA CB250R, HONDA CB650R, HONDA CBR650R, HONDA CB150R, HONDA CB300R, HONDA CB150R, HONDA CB300R
Molba essentials
For those of you who can't take a helmet home with you because you're a Malba, this product is a must. I bought a helmet bag and put it on a hook here. The key is also very soft, so it locks very well without any feeling of being chewed or chewed. ------------------------------------------------------------ -------- If you can not go up to the house with the Momo, the helmet is not going to go home, this article is essential. I lose a helmet bag and lock it here.The key size is very soft and very well locked without feeling chewing. 650R has a bit annoying to work because space is not available. Powered by Google Translator View detail
Fits: HONDA ADV150, HONDA glom, KAWASAKI Z125 Pro, HONDA PCX125, HONDA PCX150, YAMAHA MAJESTYS, YAMAHA BWS(BWS), YAMAHA BWS125(BWS), KAWASAKI Z125 (16), HONDA ZOOMERX, HONDA DAX125
You can make it a one-key system so you don't need more keys. (*^_^*)
I used to use another manufacturer's helmet lock, but it was troublesome to have another key, so I wanted to make it one-key after checking YouTube. When I turned the Handlebar all the way to the Left at the time of the Handlebar lock, the distance to the Helmet lock of the Right Side separated, and the Helmet was in the state of booby-trapped, and it seemed to scratch. I made the stopper of the other side which sandwiches Handlebar which is not enough in this product, and attached it to the place near the center of Handlebar, and the usability became very good. View detail
Good product.Large satisfied.
I was going to mount it on the Side frame of the Left Side of the vehicle, but when I put the Helmet on, it would touch the Chain and the Helmet would get dirty, so I mounted it on the Handlebar.
Installation is easy as you just sandwich the included Rubber plate and tighten the screws.
Loosen the screws to Quantity:Pair (for Left and Right) Just fine-tune the rotation direction and position, and then tighten it.
The Rubber plate is included so the Handlebar will not get scratched.
View detail
Fits: HONDA ADV150, HONDA glom, KAWASAKI Z125 Pro, HONDA PCX125, HONDA PCX150, YAMAHA MAJESTYS, YAMAHA BWS(BWS), YAMAHA BWS125(BWS), KAWASAKI Z125 (16), HONDA ZOOMERX, HONDA DAX125
Helmet was placed beautifully on the kawasaki Z125PRO!
Basically, the helmet lock of kawasaki Z125PRO has a hook at the place where the seat is removed and you can hook the D ring of the helmet. But I was worried about the side of Helmet hitting the footpeg of for Tandem with Full face Helmet, so I put Helmet lock on Handlebar. I found out on YouTube that the KIJIMA Helmet lock can be one-keyed with the kawasaki key, so I bought this product and immediately one-keyed it to the Handlebar so I can hang the helmet on my motorcycle with peace of mind. View detail
Fits: SUZUKI GSX-S1000F, SUZUKI GSX-S1000, SUZUKI GSX-S1000F, SUZUKI GSX-S1000
It's a must have!
I used it in my previous Motorcycle (CBR400R).
It is a little difficult to hang, but I am satisfied.
View detail
SHOEI Full face MicroRatchet's D Ring is hard to hang
It is difficult to hang D Ring of MicroRatchet of SHOEI Full face though I installed it.
It was scratched by dropping Helmet and failing to hang on the nail once.
Since then I have been using Helmet Lock Assist 2 KIJIMA:KIJIMA item number:P00033.
It's surprisingly hard to use and atrocious.
Not with this type of car.
View detail
I should have gotten there sooner.
The GSX1300R HAYABUSA has a helmet holder under the second seat, but to be frank, it's useless. It's easy to install and it's well made. I regret that I didn't get it sooner. The only thing I don't like is that Spare key can't be made. The key of GSX1300R HAYABUSA can't be changed to one key, so if I lose one key, I have to buy a new key unit. It is a good product though I made four ★. I recommend it. View detail
Fits: HONDA ADV150, HONDA glom, KAWASAKI Z125 Pro, HONDA PCX125, HONDA PCX150, YAMAHA MAJESTYS, YAMAHA BWS(BWS), YAMAHA BWS125(BWS), KAWASAKI Z125 (16), HONDA ZOOMERX, HONDA DAX125
absolutely necessary
I hope it's on OEM.
I think it's a must have. I think I always buy Kijima's Helmet lock when I buy any motorcycle lol.
View detail
That's very convenient!
I installed it on a 2018 Ninja 1000!
The Helmet lock for this model year is available from KIJIMA for Right Side and Left Side!
This product is designed to be installed on the Right Side of the vehicle!
It's very easy to install, anyone with the right tools could probably do it!
This kind of Helmet lock is very useful if you have one!
It's really Recommendation ♪
View detail
Fits: YAMAHA YZF-R3 ABS, YAMAHA MT-03, YAMAHA MT-03 ABS, YAMAHA MT-25, YAMAHA MT-25 ABS, YAMAHA YZF-R25 ABS, YAMAHA YZF-R25 ABS, YAMAHA YZF-R25
Nice build.
It is a well thought out creation.
I guess the only drawback is that it requires more keys.
View detail
Easier to lock than OEMHelmet lock
I was not satisfied with the OEM Helmet lock, so I chose the Helmet lock made by KIJIMA, which is outside the company but approved by Honda Customized parts for motorcycles.
It's easy to install, just thread the 8mm Hexagon Socket Bolt that holds the Left SideTandem Footpeg Bracket in place.
I think it blends in with the aggressive CBR Design because it is Black and doesn't stand out.
It's a more than adequate product for temporary Helmet theft protection while touring or on the road, with no apparent drawbacks!
I wish Honda would have offered this as an OEMAttachment from the start.
View detail
Fits like a Standard Equipment product
The Z250 is equipped with a Helmet lock, but the Tandem seat is removed and hooked.
It is not very functional to remove the Tandem seat and use the Helmet lock because the Z250 has almost no load capacity and the Seat bag is installed to put rain gear etc. when touring.
I'm worried about leaving the Helmet hooked to the Mirror or something like that when I take a break.
Installation is as simple as removing the two bolts from the Tandem Footpeg, inserting them into the footpeg, and retightening.
After installation, they fit like OEM Standard Equipment without any discomfort.
It's easy to use and no problem.
It's a shame it's an Other Brand Product and can't be opened and closed with one key, but it locks up easily so you can leave your motorcycle without worrying about your helmet.
If you have a lot of Touring opportunities, I think it's not a bad idea to put it on.
View detail
Fits: YAMAHA YZF-R3 ABS, YAMAHA MT-03, YAMAHA MT-03 ABS, YAMAHA MT-25, YAMAHA MT-25 ABS, YAMAHA YZF-R25 ABS, YAMAHA YZF-R25 ABS, YAMAHA YZF-R25
Convenient
Installation is easy.
It's great that it's designed to open so that the Helmet doesn't fall out when the lock is opened.
View detail
Fits: HONDA ADV150, HONDA glom, KAWASAKI Z125 Pro, HONDA PCX125, HONDA PCX150, YAMAHA MAJESTYS, YAMAHA BWS(BWS), YAMAHA BWS125(BWS), KAWASAKI Z125 (16), HONDA ZOOMERX, HONDA DAX125
Convenience.
A helmet lock on the Handlebar came in handy. View detail
It is easy to use
I have no complaints about the quality of this product because it is made by KIJIMA and I think this is a great product for XL1200C SPORTSTER 1200 because the place to put Helmet lock is limited.
Because Saddle bag is attached, it appreciates, and heat is worried about the reverse SIDE (Exhaust System side) though Side cover side was thought, too.
Engine Guard and Handlebar are a matter of appearance.
It solved it beautifully. If you have a similar Spec., it's Recommendation.
View detail
Fits: YAMAHA YZF-R3 ABS, YAMAHA MT-03, YAMAHA MT-03 ABS, YAMAHA MT-25, YAMAHA MT-25 ABS, YAMAHA YZF-R25 ABS, YAMAHA YZF-R25 ABS, YAMAHA YZF-R25
Touring, perfect for city driving.
Not a statement, but handy to have!
It's a great item for city driving and touring.
View detail
Fits: TRIUMPH BONNEVILLE T100, TRIUMPH StreetTwin, TRIUMPH SCRAMBLER
Also in BONNEVILLET 120.
There is another product for BONNEVILLET120, but my T120 doesn't have Grab Bar and its Rail to which the product is attached, so I bought this one for T100 which is fixed to Seat frame. I was able to install it without any problem.
You only need one Phillips Screwdriver to install it. It is fixed by tightening the bracket and the gold plate of the Helmet lock side with the screw, but the distance between the screw holes is quite far to make the tightening after installation strong, so it was a little tricky.
If the screw is hooked on the bracket side nut, you can turn the screw, but it takes a lot of force to shorten the distance to the angle that the screw goes through the nut. But it takes a lot of power to shorten the distance to the angle where the screw goes through the nut.
Once installed, it is easy to loosen and adjust the angle of the helmet lock. Image after installation is as shown in the product photo, is not noticeable, does not destroy the style. In terms of convenience, there is a difference between having it and not having it, and it is helpful not to be troubled with the placement of the Helmet in the touring destination.
View detail
Fits: KAWASAKI VERSYS-X 250, KAWASAKI VERSYS-X 250 TOURER, KAWASAKI VERSYS-X 250, KAWASAKI VERSYS-X 250 TOURER
KIJIMA Helmet holder
Because it is troublesome to remove the seat, I added an external Helmet holder.
I thought SMART is good because it is hidden in the carrier, and the bracket is narrow enough to avoid the bolt on the top box base.
However, there is a possibility of being damaged if the License Plate and Helmet hit each other, so I think it is better to pay attention to the way of hanging Helmet. In addition, if you use the D Ring attached to the Helmet, it is difficult to open and close the lock, so I use Stainless Steel Wire to make it easy to open and close.
View detail
Fits: SUZUKI GSX-S1000F, SUZUKI GSX-S1000, SUZUKI GSX-S1000F, SUZUKI GSX-S1000
A little hard to use, but better than the OEM Wire.
It is definitely easier to use than OEM. However, if the key holder is not able to cover the Helmet holder key, it may scratch around the key, so I use Kawasaki key holder so that the Helmet holder key can be folded and not exposed. Installation is very easy. I use a screw lock just in case. View detail
Fits: HONDA ADV150, HONDA glom, KAWASAKI Z125 Pro, HONDA PCX125, HONDA PCX150, YAMAHA MAJESTYS, YAMAHA BWS(BWS), YAMAHA BWS125(BWS), KAWASAKI Z125 (16), HONDA ZOOMERX, HONDA DAX125
KIJIMA Helmet Lock
One of the most cost-effective products in KIJIMA. Because the motorcycle is not equipped with a tail box, it is difficult to hang the helmet on the rearview mirror in places where you are unfamiliar. If you lose a helmet before, you lose hundreds of dollars. Now I bought the helmet lock of KIJIMA. You don't need to carry the helmet with you when you get off the car. Just buckle it on the D buckle and lock it. It is indeed much more convenient. The price is also cheap and the workmanship is no problem. If you park for a long time, it is recommended to take it with you. ---------------------------------------------- KIJIMA inside the high cost of a product, since there is no rear motorcycle mounted, so unfamiliar places not hung on the helmet mirror, a helmet loss before Diuguo few hundred pieces. Now buy a helmet lock KIJIMA get off the helmet do not carry direct debit in D deduction locked up just fine, really a lot easier. The price is cheap, work is also no problem for a long time if the proposed parking or take with you. Powered by Google Translator View detail