Reviews
Fits: KAWASAKI ZX-6R, KAWASAKI ZX-9R, KAWASAKI ZX-6RR
The position of 9R is at its form. It is the touch to which the lower half of the body lengthened the guide peg for a while to the lower one although the settlement of the upper half of the body was good. The upper half of the body was not able to be bala
The position of 9R is at its form. It is the touch to which the lower half of the body lengthened the guide peg for a while to the lower one although the settlement of the upper half of the body was good. The upper half of the body was not able to be balanced.
The motorcycle which actually equipped with this step is also straddled. Without it sees the thing by Schopp Kawasaki = only in the image of BEET, it was decided that it would be BEET and it purchased.
The position became better than normal.
to a slight degree -- the location of a step -- it may be high -- although that is right Since it may be hard to put power into a step and may become it, when the location of a step becomes high This height may be the best too.
Although a step is shorter than other manufacturers and Schopp's product When it is itself, there is no fault.
This shortness is a spartan on the contrary.
The form of the brake pedal differed from MONO of the former catalogue.
It is a design of a wind now.
View detail
Fits: KAWASAKI Z1000 (water-cooled), KAWASAKI Z1000 (water-cooled), KAWASAKI Z1000 (water-cooled), KAWASAKI W800, KAWASAKI GPZ900R, KAWASAKI GPZ750R, KAWASAKI GPZ400R, KAWASAKI GPZ1100, KAWASAKI GPZ1100, KAWASAKI GPZ1100, KAWASAKI GPZ1100, KAWASAKI ER-4n, KAWASAKI 1400GTR, KAWASAKI ZRX1100II, KAWASAKI ZRX1100II, KAWASAKI ZRX1100, KAWASAKI ZRX1100, KAWASAKI ZR-7/S, KAWASAKI ZR-7/S, KAWASAKI Z750 (water-cooled)
The its original work back step was attached to ZZR-600, and the multi-step was attached to fine adjustment of a step position. Step height became a position of the rule highest perfectly. Since the rubber of the normal step was coming as HETA, th
The its original work back step was attached to ZZR-600, and the multi-step was attached to fine adjustment of a step position.
Step height became a position of the rule highest perfectly.
Since the rubber of the normal step was coming as HETA, the feel of aluminum steps and the grip of boots are very well satisfactory.
View detail
Fits: YAMAHA Cerro 250, YAMAHA Cerro 250, YAMAHA Cerro 250, YAMAHA Cerro 250, YAMAHA Cerro 250, YAMAHA Cerro 250, YAMAHA Cerro 250, YAMAHA Cerro 250, YAMAHA Cerro 250, YAMAHA Cerro 250, YAMAHA Cerro 250, YAMAHA tricker, YAMAHA tricker, YAMAHA tricker
It attached to SEROW 250. I hope easy and that you do not separate since attachment is a bolt stop. metal -- although it is unreserved and the edge does not stand -- spikes mind -- clever normal -- if -- although the intense damage to the sole was
It attached to SEROW 250.
I hope easy and that you do not separate since attachment is a bolt stop.
metal -- although it is unreserved and the edge does not stand -- spikes mind -- clever normal -- if -- although the intense damage to the sole was anxious, he can feel easy about this.
Moreover, probably, durability will also be OK, since it does not slide and is considerably thick.
Although the only minus point is a price, I think that it is cheap rather than he rebuys shoes at an early stage.
In addition, the part foot position of the thickness of a rubber goes up by about 2 cm.
View detail
Fits: SUZUKI GSX1300R GSX1300R HAYABUSA(GSX1300R HAYABUSA)
The necessaries (?) of a peregrine falcon. It is a frame heat guard. Attachment by double-stick tape. The frame of the peregrine falcon which makes a fried egg if nothing is done. Heat can be intercepted to the grade which will be touched
The necessaries (?) of a peregrine falcon.
It is a frame heat guard.
Attachment by double-stick tape.
The frame of the peregrine falcon which makes a fried egg if nothing is done.
Heat can be intercepted to the grade which will be touched if Colet is followed.
As there is merely individual specificity considerably, as for that [ one's ], the step circumference is not attached exactly.
The answer it is such specification when a manufacturer is asked.
I think that it is not specification rightly since that of the BUSA friend who is close is attached exactly.
If the product of A-TECH has quite delicate accuracy and it orders, let's pray that a good thing comes.
But twill carbon is beautiful.
I think that twill will prosper most if carbon is used with much trouble! Probably, it should equip with the direction troubled by heat.
View detail
Although used for changing management of an oil cooler, it cannot obtain that color has only blue under the condition that size deployment is satisfactory. Although a brake hose is also so, if it is called the parts of alumite treatment, blue red of a
Although used for changing management of an oil cooler, it cannot obtain that color has only blue under the condition that size deployment is satisfactory.
Although a brake hose is also so, if it is called the parts of alumite treatment, blue red of a time-tested product is amusing.
View detail
He did not like a pure bellows cover but it exchanged for this. The circumference of a front felt it refreshed only now. They are goods which are pleasing by change of the considered more than.
He did not like a pure bellows cover but it exchanged for this.
The circumference of a front felt it refreshed only now.
They are goods which are pleasing by change of the considered more than.
View detail
Fits: KAWASAKI Z250, KAWASAKI Ninja 250R, KAWASAKI Z250, KAWASAKI Ninja 250R
By bringing down 20 mm of seat height of Ninja250R, it became safe with help also itself with a height of 157 cm. A direction with a height of 160 cm or less is one article with which I want you to equip by all means.
By bringing down 20 mm of seat height of Ninja250R, it became safe with help also itself with a height of 157 cm.
A direction with a height of 160 cm or less is one article with which I want you to equip by all means.
View detail
Although purchased only by appearance, the good clear of the field of view was chosen for the highway run which should come. Although normal and a difference are not felt in town riding, if the protection-against-wind effect at the time of high speed
Although purchased only by appearance, the good clear of the field of view was chosen for the highway run which should come.
Although normal and a difference are not felt in town riding, if the protection-against-wind effect at the time of high speed operation lies down so that it may be quite high, to be sure, it is calm.
Moreover, the fatigue of the body after a long-distance race line is reduced.
View detail
Fits: YAMAHA DRAGSTAR1100, YAMAHA DRAGSTAR1100Classic, YAMAHA DRAGSTAR250
Is this product the cheapest in the side bag support which exists partly? Although I was running without support half a year, I purchased in consideration of involvement prevention of a side bag. It seems that the wearing feeling of a side bag har
Is this product the cheapest in the side bag support which exists partly?
Although I was running without support half a year, I purchased in consideration of involvement prevention of a side bag.
It seems that the wearing feeling of a side bag hardly changes even if it sticks support and does not stick although actually stuck.
Although it thought more that a side bag was pushed out by the side face .....
If you dare to say, is it only uneasy dissolution of involvement etc.?
It may be based also on the form of a side bag.
It is a grade said as it is better to be rather than there is no support.
View detail
Since the rubber deteriorates gradually, it is parts for which exchange is needed, but the point which the necessity for an inventory check does not have like brand-name parts, either, and can be purchased freely thinks that it is good.
Since the rubber deteriorates gradually, it is parts for which exchange is needed, but the point which the necessity for an inventory check does not have like brand-name parts, either, and can be purchased freely thinks that it is good. View detail
CB1300SB (2007 type) was equipped. In order for form and weight to hardly change that it is pure, it is completely appearance serious consideration. (*^_^*). Since it only diverts and attaches the rubber of a pure cover, if there is attachment as
CB1300SB (2007 type) was equipped.
In order for form and weight to hardly change that it is pure, it is completely appearance serious consideration.
(*^_^*). Since it only diverts and attaches the rubber of a pure cover, if there is attachment as long as 10 minutes, it will have been possible.
Although texture is good at the product made from carbon, if a knee grip is carried out and it runs, what a wound is easily attached to to the surface is a difficulty.
Although it is natural since the place is a place well ...
View detail
Fits: YAMAHA FZ-8 FAZER, YAMAHA FZ-1, YAMAHA FZ-1 FAZER, YAMAHA FZ-8
08 FZ1-N (domestic specification) was equipped. Attachment working hours are about 1 hour and a half. The description had a little unclear unkind admiration as me. A fender less style completely changes an image with normal too. Especially
08 FZ1-N (domestic specification) was equipped.
Attachment working hours are about 1 hour and a half.
The description had a little unclear unkind admiration as me.
A fender less style completely changes an image with normal too.
Especially the rear style from slant serves as a compact and racy image, and is very pleasing.
I think that it became smarter when it was a design which a number plate and a blinker fixing position go up on 1 more cm.
View detail
Fits: HONDA CB750 RC42, HONDA CB750 RC17E
It is attachment to CB750 (RC42). Four for that it is the 7 same mm as the diameter of a cable being pure and a cylinder are set, and exchange should not become pain, if it is those who are performing attachment of a fuel tank and removal daily since
It is attachment to CB750 (RC42).
Four for that it is the 7 same mm as the diameter of a cable being pure and a cylinder are set, and exchange should not become pain, if it is those who are performing attachment of a fuel tank and removal daily since die length is cut appropriately.
The purchase what is called to an efficient plug is considered and united, and the recommend also of the cable can be carried out to especially the person ..
the whole region -- CB750 (RC42) of linear engine characteristics can feel an effect at the time of start and the acceleration from cruising.
Although it is the range of fine tuning of this sort, of course ..
Since cost effectiveness was delicate, * was set to four.
View detail
Fits: KAWASAKI Z1 (900SUPER4), KAWASAKI Z2 (750RS/Z750FOUR), KAWASAKI Z1 (900SUPER4), KAWASAKI Z2 (750RS/Z750FOUR), KAWASAKI Z1 (900SUPER4), KAWASAKI Z2 (750RS/Z750FOUR)
It seems that it becomes [ Does it say / A TEISEI (low back) type /? ], and there is even a small thing these days although purchased to power-source processing for accessories. It should have investigated to a slight degree and should have purchased.
It seems that it becomes [ Does it say / A TEISEI (low back) type /? ], and there is even a small thing these days although purchased to power-source processing for accessories.
It should have investigated to a slight degree and should have purchased.
Structure may be [ product itself ] solid.
View detail
Fits: HONDA Ape 100, HONDA GIORCUB, HONDA JAZZ, HONDA CHALY 70, HONDA CHALY 50, HONDA APE 50, HONDA XR80, HONDA XL80, HONDA XL50, HONDA XE75, HONDA XE50, HONDA R&P, HONDA CB50, HONDA MAGNA50, HONDA MONKEY RT, HONDA MOTRA, HONDA Nauty Dax, HONDA DAX70, HONDA DAX, HONDA MONKEY R
It attached to APE50. Since bore up was carried out and the moderation ratio was not correct, RIYA was made into 40 dishes. Attachment is only exchanged as it is pure. Pains were taken to merely remove a ring.
It attached to APE50.
Since bore up was carried out and the moderation ratio was not correct, RIYA was made into 40 dishes.
Attachment is only exchanged as it is pure.
Pains were taken to merely remove a ring.
View detail
As the blinker of the shadow was a mandarin orange, it was purchased in order to change an image this time, since it is not felt not much refreshed. It exchanged and was a correct answer. Former and an image change, and it is felt refreshed and is
As the blinker of the shadow was a mandarin orange, it was purchased in order to change an image this time, since it is not felt not much refreshed.
It exchanged and was a correct answer.
Former and an image change, and it is felt refreshed and is popular also from the surroundings.
View detail
In consideration of the bulb gone, it purchased to the stock. Although he noticed after purchase, since I was a clear lens, I was an orange bulb. Since it is unavoidable, it is under examination whether it is used as it is, or it is used for an or
In consideration of the bulb gone, it purchased to the stock.
Although he noticed after purchase, since I was a clear lens, I was an orange bulb.
Since it is unavoidable, it is under examination whether it is used as it is, or it is used for an orange, coloring thinly.
The direction to purchase needs to be warned not only about wattage but about this point.
Foundations Orange lens => Clear bulb Clear lens => Orange bulb Peevish!!
View detail
Fits: HONDA CRF50F, HONDA XR50R (for competition), HONDA solo, HONDA JAZZ, HONDA MONKEY, HONDA SUPER CUB 50, HONDA LITTLE CUB, HONDA LITTLE CUB, HONDA MONKEY RT, HONDA MONKEY R, HONDA MONKEY BAJA, HONDA MONKEY, HONDA SUPER CUB 50, HONDA MONKEY, HONDA SUPER CUB 50, HONDA SUPER CUB 50, HONDA CUB press 50, HONDA CUB press 50, HONDA CUB press 50, HONDA DAX
It purchases for the purpose of practical torque up. The texture in particular of parts is also satisfactory. I think that work will progress snappily if experienced in the bore up of a monkey system engine since it is exchange only on the waist.
It purchases for the purpose of practical torque up.
The texture in particular of parts is also satisfactory.
I think that work will progress snappily if experienced in the bore up of a monkey system engine since it is exchange only on the waist.
Probably, at the price which is below 10,000 yen, cost performance will be dramatically high.
However, since a compression ratio becomes high and high rotation stops turning, the simultaneous purchase of the high cam for normal heads is recommended strongly.
View detail
Fits: HONDA CRF50F, HONDA XR50R (for competition), HONDA Super Cub 50, HONDA Super Cub 50, HONDA Super Cub 50, HONDA Super Cub 50, HONDA solo, HONDA monkey, HONDA monkey, HONDA Little Cub, HONDA Little Cub, HONDA MONKEY BAJA, HONDA BENLY50CD50, HONDA BENLY50S, HONDA CUB press 50, HONDA CUB press 50, HONDA CUB press 50, HONDA DAX, HONDA CUB press 50, HONDA JAZZ
Only by 75-cc bore up, since high rotation stopped having turned, it introduced. Although the low speed torque fell truly comparing with the product and a bore up + normal camshaft, maintaining practical torque, it stagnates all over the districts and
Only by 75-cc bore up, since high rotation stopped having turned, it introduced.
Although the low speed torque fell truly comparing with the product and a bore up + normal camshaft, maintaining practical torque, it stagnates all over the districts and came to turn that there is nothing.
In order that Power may come out from inside rotation in the rotation region like the entrance of especially high rotation used most, only compared with bore up, we become quite easy to operate, and it is recommended.
However, although idling becomes unstable a little, it is satisfactory if the rotational frequency of idling is raised for a while.
View detail
Fits: Others , YAMAHA MT-07, YAMAHA FZS1000 FAZER, YAMAHA FZ1FAZER, SUZUKI TEMPTER, SUZUKI DL1000 V-STROM1000, KAWASAKI ZX-12R, KAWASAKI ZRX400, KAWASAKI ZRX1000, KAWASAKI ER-6n, KAWASAKI ZEPHYR400χ, KAWASAKI BALIUS2, HONDA HORNET250, HONDA VTR250, HONDA CRF250L, HONDA CB400SF, HONDA CBR600RR, HONDA CB400SB, HONDA CB1300SB, HONDA CB1300SF
Since a design is also good and does not have height, he thinks that it goes into an easy category also in the case of getting on and off. A rainsuit and underwear can be put in also in capacity. However, the work of attaching a fixing belt to a s
Since a design is also good and does not have height, he thinks that it goes into an easy category also in the case of getting on and off.
A rainsuit and underwear can be put in also in capacity.
However, the work of attaching a fixing belt to a sheet may be time and effort as compared with a tank back.
View detail