Reviews
Fits: Others , YAMAHA SEROW250, YAMAHA TMAX500, YAMAHA RZ250R, TRIUMPH TRIDENT 660, YAMAHA MT-09, SUZUKI RF900, SUZUKI GSXS1000F, SUZUKI GSX-S750, SUZUKI GSX1100S KATANA, SUZUKI GSX-S1000, SUZUKI B-KING, SUZUKI GSX-R750, KAWASAKI zephyrχ, KAWASAKI NINJA 1000 (Z1000SX), KAWASAKI ninja250, KAWASAKI ZX-9R, KAWASAKI ZX-6R, KAWASAKI ZEPHYR400χ, KAWASAKI ZRX1200
Purchase since extraction etc. are troublesome although the touring net was used until now. it will not be so convenient if it is used -- it has been deeply moved with !. Although purchased for the touring for one night and two days, it is attache
Purchase since extraction etc. are troublesome although the touring net was used until now.
it will not be so convenient if it is used -- it has been deeply moved with !.
Although purchased for the touring for one night and two days, it is attached with a refreshing also behind GB250 clubman, and a size is right just! It is a generous compartment even if it puts in a DSLR-nikon D200+28-200mm+ battery pack.
furthermore -- although the single burner of the coleman was put in for the next touring -- this -- moreover -- exactly -- !. It can utilize for an accessory case etc. and can also find a drink holder useful.
Also when not using it, it is also good for an attachment belt not to dangle, since Locke Bert is attached.
View detail
![Main Jet Set [TK Round Type/Large]](https://img.webike-cdn.net/catalogue/13652/450-0052000_TS.jpg)
Fits: YAMAHA AXIS 50, YAMAHA AXIS 50, YAMAHA AXIS 50, YAMAHA BWS(BWS), YAMAHA BWS(BWS), YAMAHA Remote controller jog, YAMAHA Remote controller jog, YAMAHA BOXN, YAMAHA VINO(2Cycle), YAMAHA VINO(2Cycle), YAMAHA VINO(2Cycle), YAMAHA VINO(2Cycle), YAMAHA CHAMP80, YAMAHA CHAMP, YAMAHA CHAMP, YAMAHA CHAMP, YAMAHA CHAMP, YAMAHA CHAMP, YAMAHA CHAMP, YAMAHA CHAMP
You may be easy to arrange the lineup of a No. 2 difference. Although it is the highest when I have you make from a No. 1 mistake if I may be allowed to wish so much ... Is avaricious too much!?
You may be easy to arrange the lineup of a No. 2 difference.
Although it is the highest when I have you make from a No. 1 mistake if I may be allowed to wish so much ... Is avaricious too much!?
View detail
Since a wrist will become painful so that it becomes impossible to grasp a clutch if it fits into traffic congestion, whether it can ease purchases with ?. If it uses, a wrist will be good fixed to KANJI and useless power will not enter in an action o
Since a wrist will become painful so that it becomes impossible to grasp a clutch if it fits into traffic congestion, whether it can ease purchases with ?.
If it uses, a wrist will be good fixed to KANJI and useless power will not enter in an action of a spring.
If a glove is attached attach [ this ], but one difficulty is mentioned, cloth is sewn between the thumb and an index finger, but since that is thick, become painful.
If a clinch portion is cut, it will become thin and a pain will also be lost, but it is regrettable although it, as it is, expected that he was a famous manufacturer.
View detail
Although the net was used until now, since an after-purchase net was not able to use a motorcycle, the cord was purchased for the first time. Although avoided somehow, if it actually uses, there is a degree of freedom and it is extremely easier-to-use
Although the net was used until now, since an after-purchase net was not able to use a motorcycle, the cord was purchased for the first time.
Although avoided somehow, if it actually uses, there is a degree of freedom and it is extremely easier-to-use than a net.
If two nights are the touring for about three days (BIJIHO use), 2 m is completely sufficient.
View detail
Fits: YAMAHA Apprio, YAMAHA Super Jog Z, YAMAHA Super Jog ZR, YAMAHA Apprio, YAMAHA Super Jog Z, YAMAHA Super Jog ZR
Decrease is also early so that width may be somewhat large. A weight display may be intelligible.
Decrease is also early so that width may be somewhat large.
A weight display may be intelligible.
View detail
He thought that it did if there is an extreme short stubby driver when it observes [ Can't only the case of a float bowl be removed somehow? ], since it is troublesome to take down a carburetor one by one when exchanging jets, and it purchased. Althou
He thought that it did if there is an extreme short stubby driver when it observes [ Can't only the case of a float bowl be removed somehow? ], since it is troublesome to take down a carburetor one by one when exchanging jets, and it purchased.
Although goods of this sort had come out of various manufacturers, since this was a case of killing two birds with one stone by the substitution formula, it was chosen.
However, whether if it says from a result, the clearance of enough containing a driver occurs, but it is put into power, so that it inserts in this crevice and a screw can be loosened, and since it would be an impossible talk if it is called ?, and + slot had licked a few, it gave up, and after all, it exchanged and corresponded to the hexagon socket head cap screw of SUS.
laziness meets by the ability to do -- although it came out and it turned out that it cannot do, I am never a cause of a tool and thought rather that this driver was sufficient quality at this price.
View detail
In an ordinary vinyl tape, when it twists around wiring, it is too thick, and it is hard to use, being bulky. This product is thin, it also has adhesive power, fits wiring and is finished finely. They are reconstruction of wiring, and indispensabl
In an ordinary vinyl tape, when it twists around wiring, it is too thick, and it is hard to use, being bulky.
This product is thin, it also has adhesive power, fits wiring and is finished finely.
They are reconstruction of wiring, and indispensable items when repairing.
View detail
Although it is in other impression, since it will flow backwards if it pours in continuously, it is necessary to pour in gradually. Since it still flows backwards somewhat from the wire side, if something closes the wire side (it gathers with a finger
Although it is in other impression, since it will flow backwards if it pours in continuously, it is necessary to pour in gradually.
Since it still flows backwards somewhat from the wire side, if something closes the wire side (it gathers with a finger or is a knob with previous thin pliers) and it is poured in, it is in good condition.
Although there was an attached adapters for phi1 metallic nozzles (product made of resin), an inside diameter was not able to insert the metallic nozzle of phi 1 at all small.
The tube of the inside diameter phi 1 was purchased and used in the home center.
It was in good condition.
If there is nothing well, it will be troubled, but user-friendliness is unsatisfactory.
View detail
Fits: KAWASAKI GPZ750R, KAWASAKI GPZ900R
Since axle part was changed and formed into 17 inch and a chain was equivalent to a frame, it purchased and attached. Attachment was very easy, and it attached and completed it by bolt on mostly. The comment after attachment are at the axel OFF ti
Since axle part was changed and formed into 17 inch and a chain was equivalent to a frame, it purchased and attached.
Attachment was very easy, and it attached and completed it by bolt on mostly.
The comment after attachment are at the axel OFF time, although it is not worrisome at the time of the axel ON. GOTSU A roar sound can be heard.
Now, although it stopped having been worrisome, sound was worrisome at the time of the start and it might have returned on the way.
Since it is lost that an important chain interferes to a frame, it is one of the parts which Kon cannot part with.
View detail
[Good point] A weight saving can be carried out if compared pure. Appearance is very stylish. Although low and medium speed is common, a power band becomes a high rotation twist too. [Bad point] Explosive sound roaring hears sound more than th
[Good point] A weight saving can be carried out if compared pure.
Appearance is very stylish.
Although low and medium speed is common, a power band becomes a high rotation twist too.
[Bad point] Explosive sound roaring hears sound more than the sound volume written.
(Is it for a one cylinder?) It is better not to remove an attached baffle.
Although the exhaust pipe is also using the delta, a stainless glow is attached for a stainless.
(A stainless glow is attached immediately)
View detail
Fits: YAMAHA WR250X, YAMAHA WR250R, YAMAHA WR450F, YAMAHA WR250F, YAMAHA YZ450F, YAMAHA YZ250F, YAMAHA YZ125, YAMAHA YZ250
Since the front was exchanged for the stainless mesh, when pure, petty ! was thought and Jeter's clamp was attached. since there is no defect in particular and the price is cheap -- * -- it is five!
Since the front was exchanged for the stainless mesh, when pure, petty ! was thought and Jeter's clamp was attached.
since there is no defect in particular and the price is cheap -- * -- it is five!
View detail
Red alumite is good touch. It is touch that a pure twist is also rigid. However, after attaching a crevice, when exchanging for a stainless mesh, exhaust air never falls out.. Although the stroke of the brake was adjusted to the limit, exhaust air
Red alumite is good touch.
It is touch that a pure twist is also rigid.
However, after attaching a crevice, when exchanging for a stainless mesh, exhaust air never falls out.. Although the stroke of the brake was adjusted to the limit, exhaust air did not fall out.
Although the piston was pushed by hand directly and air-bleeding was carried out, a stroke may become then, less insufficient [ a pure twist ] possibly.
View detail
Fits: HONDA XR100 Motard, HONDA XR50 Motard
A brake touch (Acknowledge) gets across to a real. Delicate breaking is likely to be made. Appearance also became good?
A brake touch (Acknowledge) gets across to a real.
Delicate breaking is likely to be made.
Appearance also became good?
View detail
I would like to use the mirror bought before... Since the car body to attach was a yamaha, this product was purchased. Only at one of the two, since height changed, it has been improved by purchasing an adapters on either side.
I would like to use the mirror bought before... Since the car body to attach was a yamaha, this product was purchased.
Only at one of the two, since height changed, it has been improved by purchasing an adapters on either side.
View detail
Fits: YAMAHA YZF750SP, YAMAHA YZF750R, YAMAHA YZF750, YAMAHA YZF600R, YAMAHA YZF1000R, YAMAHA YZF1000, YAMAHA XJR400R, YAMAHA XJR1300SP, YAMAHA XJR1300, YAMAHA XJR1200, YAMAHA XJ400S, YAMAHA TZR250R, YAMAHA TZR250R, YAMAHA TZ250, YAMAHA TZ125, YAMAHA TRX850, YAMAHA TDM850, YAMAHA GTS1000, YAMAHA FZS600SN, YAMAHA FZS600S
It purchased for the exchange from a pure black lever. There is a handy feeling at an original manufacturer's product and a price practically equal. The touch which is easier to grasp satisfactorily than an original manufacturer's product although
It purchased for the exchange from a pure black lever.
There is a handy feeling at an original manufacturer's product and a price practically equal.
The touch which is easier to grasp satisfactorily than an original manufacturer's product although it is some also carries out an adjuster.
View detail
Fits: SUZUKI GSX1300R GSX1300R HAYABUSA, SUZUKI GSX1300R GSX1300R HAYABUSA, SUZUKI GSX1300R GSX1300R HAYABUSA
appearance also hid nonchalantly -- custom . Although it is the position in question, it becomes thin with my height of 173 cm, and a load arm usually considers about by slight 72 kg of dies guide-peg shortness. When normal, while running all over
appearance also hid nonchalantly -- custom .
Although it is the position in question, it becomes thin with my height of 173 cm, and a load arm usually considers about by slight 72 kg of dies guide-peg shortness.
When normal, while running all over the town, the handle felt somewhat far approached moderate.
since there is no intention of carrying out in an up handle -- this -- about -- it is the best.
Incidentally three sheets are made to blow.
View detail
![[IDEAL] Rearset Kit](https://img.webike-cdn.net/catalogue/10918/002-a006sv_TS.jpg)
Any sense of incongruity could not be found, and it came exactly, so that if this one is purer was thought. The location of normal is past before past [ the bottom ], and since the reaction to the load input to the inn side step was too blunt, after c
Any sense of incongruity could not be found, and it came exactly, so that if this one is purer was thought.
The location of normal is past before past [ the bottom ], and since the reaction to the load input to the inn side step was too blunt, after conversion becomes easy to carry out control of an angle of bank.
Although it was satisfied to the operativity of the pure rear brake, the touch became good suddenly.
It is touch that a linear understands even the situation of a pad.
View detail
Fits: HONDA Ape 100 Type D, HONDA Ape Type D, HONDA XR50 Motard, HONDA XR100 Motard, HONDA NSR Mini, HONDA NSF100, HONDA Ape 100 Type D, HONDA Ape Type D, HONDA XR50 Motard, HONDA XR100 Motard, HONDA NSR Mini, HONDA NSF100
The guard function has not been proved yet... I do not want to carry out if possible. Attachment is easy. Feeling which rigidity went up?
The guard function has not been proved yet... I do not want to carry out if possible.
Attachment is easy.
Feeling which rigidity went up?
View detail
Fits: YAMAHA WR250X, YAMAHA WR250R, YAMAHA WR250X, YAMAHA WR250R
Although the twist which the engine performance is not known if it does not fall over, but is not attached is attached by ! in which it is better to attach and a shaft is made to penetrate in the case of attachment .. It is a little short. bolt length
Although the twist which the engine performance is not known if it does not fall over, but is not attached is attached by ! in which it is better to attach and a shaft is made to penetrate in the case of attachment .. It is a little short.
bolt length thinks last-minute ~ -- * -- it is three.
View detail
Fits: YAMAHA WR250X, YAMAHA WR250R, YAMAHA WR250X, YAMAHA WR250R
It fell at last after slider wearing the other day. Except [ to the left-hand side by the axel sudden open one ] the ability to have deleted the axle slider and hand guard of RIA although it opened and was GOKE, even the mirror and the shroud were unh
It fell at last after slider wearing the other day.
Except [ to the left-hand side by the axel sudden open one ] the ability to have deleted the axle slider and hand guard of RIA although it opened and was GOKE, even the mirror and the shroud were unhurt and it was surprised.
Although the car body might be damaged depending on how to fail to get off the ground truly, the effect of the first slider to be useful was greatest.
As look before you leap, it is a recommend absolutely in the direction of un-falling.
View detail