Reviews
Fits: YAMAHA PW50 (PW50B1), YAMAHA PW50 (PW50D1), YAMAHA PW50 (PW50E1), YAMAHA PW50 (PW50F1), YAMAHA PW50 (PW50G2), YAMAHA PW50 (PW50H2), YAMAHA PW50 (PW50J2), YAMAHA PW50 (PW50K2), YAMAHA PW50 (PW50L2), YAMAHA PW50 (PW50M2), YAMAHA PW50 (PW50W), YAMAHA PW50 (PW50X), YAMAHA PW50 (PW50Y), YAMAHA PW50
PW50
yamaha PW50Carburetor.
Replaced because it was no longer Idling.
Other Brand Products are also available on the Net for about 3000 yen, but they received mixed reviews.
OEM Product.
I am glad that it was Timing with a 5% discount on OEM Product at WeBig.
There are several model numbers of CarburetorAssembly for each year of the long-lived model,
Note that the price is also RoseRose.
View detail
With Down Type Exhaust System, you have to make a bracket.
Was the one you received as per Image? Better than Image.
Was the installation difficult? It is easy to install if you are a do-it-yourselfer.
[Was there anything that disappointed you?
The MORIWAKIDown Type Exhaust System does not allow the Bracket to be installed, so I lowered the Bracket so that it does not interfere with the Brake and made it myself.
View detail
TS125R.
PROs KillChamber is installed on TS125R.
The Torque valley becomes Large at Timing when the exhaust Valve is activated.
Replaced from OEMMain jet.
#150→#160 and #10 Large and Torque valley is now Mild.
It could have been a little larger.
View detail
TS125R.
This is the Hose of the 2-st Oil.
This is the transfer section from the oil pump to the carburetor.
When cleaning the carburetor, the existing hose was replaced because it had broken due to deterioration.
I.D. 2mm was not found in any homestore or supply store.
View detail
good-looking
Replaced with Swing Arm replacement.
Better looking than OEM
View detail
Pants suitable for summer and lightweight.
I was looking for a cool and lightweight pant that is easy to move in. I like the shape of the hem, too, because I can easily slip them into my OffBoots. I choose "Just fitSize" because I wear my Knee guard on the outside. View detail
The sewing of the fingers is particular?
How was your experience with it?
Can I say that the good thing is that I don't feel anything special using it, and the folded seam allowance of Inner Sewing never hits my fingertips.
Leather is used in areas where there is a risk of injury in the event of a fall, while stretchy fabric is used in areas where there is a lot of flexing, so there is no sticking and it is comfortable.
I think it is best suited for touring and city driving.
[Was there anything that disappointed you?
So far, none
What are the specs of the product, such as protector?
I think it is sufficient for touring and city driving.
How did it compare to other products?
I used to use hit.air, but this one has slightly longer fingers or my fingertips don't hit the seam allowance.
Other items that would be helpful
Sewing is basically Inner Sewing, but only the middle, ring, and small fingers are sewn on the outside. Some obsession." I bought it because I felt that the
View detail
Air Valve for CHOINORI.
[How is it used?
Air Valve was cracked when SUZUKI/CHOINORI replaced the tire, so it was replaced with an OEM Product.
Was the one you received as per Image?
It was just as Image.
We also considered Other Brand Product, but the Gold price was not much different, so we chose OEM Product.
Item number:43130-24A00-000 is the authorized PN, but this is a replacement.
How was your experience with it?
There were no problems with use at all.
It is a common RubberValve, but it is durable and of good quality.
[Points to note]
When passing the air valve through the wheel, it is necessary to lubricate it firmly with tire wax or silicon spray to prevent cracking.
How did it compare to other products?
There are many other inexpensive Air Valve etc., but I have no problem with this one because it is cheaper and is an OEM product, so the quality is good.
View detail
Air Valve for CHOINORI Wheel
[How is it used?
Air Valve was cracked when SUZUKI/CHOINORI replaced the tire, so it was replaced with an OEM Product.
Was the one you received as per Image?
It was just as Image.
We also considered Other Brand Product, but the Gold price was not much different, so we chose OEM Product.
This PN is the official number, but 43130-24A11-000 is the replacement.
How was your experience with it?
There were no problems with use at all.
It is a common RubberValve, but it is durable and of good quality.
[Points to note]
When passing the air valve through the wheel, it is necessary to lubricate it firmly with tire wax or silicon spray to prevent cracking.
How did it compare to other products?
There are many other inexpensive Air Valve etc., but I have no problem with this one because it is cheaper and is an OEM product, so the quality is good.
View detail
OEM products of other Manufacturer?
[How is it used?
When SUZUKI/CHOINORI replaced a tire, the air valve was cracked, so this tool was used to replace it with an OEM product.
Was the one you received as per Image?
It was just as Image.
Perhaps this product is the same manufacturer as the products sold by AstroPROducts, Amazon, etc.
The color, shape, etc. are similar.
How was your experience with it?
There were no problems with use at all.
A fair amount of force is required to pull the Valve.
[Points to note]
When connecting to Valve, it is necessary to remove the Parts called Insects in Valve.
How did it compare to other products?
I have not used other Manufacturers, but I think the low-priced ones are sufficient because there is almost no difference in Gold amount.
View detail
Circlip for CHOINORI front sprocket
[How is it used?
It will be a circlip to fix the front sprocket of SUZUKI/CHOINORI.
Was the one you received as per Image?
It was just as Image.
Circlip replaced an existing item that was not known when it was replaced due to wear and tear.
How was your experience with it?
Since it is not performance-related, there is no particular change before or after the replacement.
However, it is effective in that it eliminates the risk of cracking.
[Points to note]
There are no areas that require special attention.
How did it compare to other products?
There is no Other Brand Productetc., so this one, OEM Product, is required.
View detail
Maintenance.
I have not used it yet but the Bolt on the R1 has rusted so I bought it to replace it.
I would recommend everyone to replace it before this happens because it will make the Brake less effective. LOL!
View detail
It's not that cool, but the structure is solid.
I used it for the first time on a May day with a maximum temperature of 27 degrees Celsius, but it did not feel that cool.
On the other hand, it may mean that the structure is solid.
The palm is made of Goat skin and seems to be durable, but I have just started using it, so its durability is unknown.
The fit was good and I was able to operate my phone without any problems.
View detail
Fits: BMW R1200GS, BMW R1200GS Adventure, BMW R1200R, BMW R1200RS, BMW R1200RT, BMW R1250GS, BMW R1250GS Adventure, BMW R1250R, BMW R1250RS, BMW R1250RT
It's a must for Oil replacement.
BMW is said to be a Motorcycle only for the rich, but I still want to put in my favorite Oil and keep the cost down.
The only thing I decided to ask Dealer for was the price, and the price is meta-fucking-high.
So I changed the Oil by myself!
Attachment, too!
This is essential in that case!
View detail
If it is a single cylinder, it is very effective Large!
Fuel economy will also increase.
Power also goes up.
Life gets better, too.
Is there anything cheaper and more effective Large?
The effect is particularly large for single cylinders.
Installation on CUB110.
View detail
Let's use it for Oil exchange!
When replacing oil, it is easy to fail to catch the oil if the waste oil is thrown away, but with this, it is safe.
There is no such thing as a failure and overflow.
It makes a difference whether you have this or not, and you can replace the oil with confidence!
View detail
For CUB Oil replacement!
I like this one because it is inexpensive, contains two sheets, and is copper!
The oil can be replaced with confidence because it is properly crushed!
It's essential to replace the Oil in CUB110!
View detail
I think it is an elaborately designed OEMMirror.
I would love to have a stylish Mirror for ESTRELLA, but I have returned my SR400 to OEM Mirror, and I have reaffirmed the visibility and safety of OEM Mirror, so I have decided to buy another OEM Mirror for ESTRELLA as well.
ESTRELLA's OEMMirror, Quantity:Pair (for Left and Right) to
[Motorcycle Back Mirror]
... can check the back of the Motorcycle. Back Mirror is a safe way to travel. Security Parts 。
For motorcycles with a maximum speed of 50 km/h or more, the Quantity:Pair (for Left and Right) s Back Mirror is not installed, it is subject to violation of the Road Traffic Law.
Mirror is a must for Motorcycle.
Back Mirror is indispensable to check the backward direction while driving a motorcycle.
Considering the current traffic situation, there are many cases where it is dangerous not to check the rear of the vehicle, and it is a very important security component.
And if you don't wear Mirror, you will be punished with Gold as a violation.
Mirror safety standards
...Motorcycle's mirror surface area is more than 69 square centimeters 。 If the Mirror is circular, the diameter must be between 94mm and 150mm to comply with the safety standard.
Mirror mirror surface area, regardless of shape, must be at least 69?! 。 For example, 70mm×100mm is OK, but 70mm×90mm has an area of 63?, which is ? in terms of safety standards. 。 For a square, 83mm×83mm is ? at 68.89?.
(Since it is a 250, it is not subject to inspection, but in the rare case that it is stopped by the police on a public road, it will be subject to improper maintenance as a vehicle with unauthorized modifications. 。 He said that it would be policed as an illegal modification, Gold, a penalty of up to six months in prison or 300,000 yen. I'm not sure if it's a good idea. →It's pretty tough...there's been a lot of enforcement lately, so you have to be careful.
And Mirror is only one ?.
According to the Ministry of Land, Infrastructure, Transport and Tourism, "Motorcycles exceeding 50 km/h are Quantity:Pair (for Left and Right) Both Sides must have 1 pc. each of the posterior mirrors."
Quantity:Pair (for Left and Right) I was certainly surprised at how much easier it was to see the "A" on the "B".
[Visibility] Safety Standards We want to focus on such things as the OEM.
【good point】
◎Rounded rectangular shape Mirror.
Design is good when considered as OEM.
Visibility is of course there. The blind spots seem to have been reduced.
I like the ◎Plating is beautiful and suits the car body.
[Bad point]
The design is so delicate that it can be loosened by vibration (laughs).
▲Steel, so worry about rust. Please wipe it with a blister.
The concept of ESTRELLA Motorcycle is Retro, and I have the impression that it is a well-designed Mirror even if we consider it as an OEM.
It is easy to see, and this shape can be used with the Quantity:Pair (for Left and Right) I think Parenthesis is a good idea even if you put it on.
View detail
Merit to wear any jacket you like.
Motorcycle SuppliesManufacturer's Jackets are all dorky, so I bought one to wear with my favorite clothes.
I think you should choose 1 Size below your normal size because it stretches quite a bit.
The elbow pad does not fit just by putting it on, so the position needs to be adjusted each time it is put on.
It is well ventilated, if not cool, in the summer.
It is less reassuring than Solidly's Protector, but it is more secure than not wearing it.
Cosmetically, I felt it was a bit expensive.
View detail
It's pretty good
The Jacket I had been using was getting tired and I decided to replace it.
I am using it with a Hard Type Brest guard. I had it exchanged to LL because it was a little tight in LSize due to my growing belly.
It is breathable and a little chilly when worn in early spring. It is best to use it in midsummer.
The design is good and I like the Large change.
View detail