Reviews
Fits: KAWASAKI Z900RS, KAWASAKI Z900RS, KAWASAKI Z900RS, KAWASAKI Z900RS, KAWASAKI Z900RS CAFE, KAWASAKI Z900RS CAFE
Coexistence with OHLINS is possible (need to be worked out)
The Z900RS is equipped with one Helmet holder originally, but it is tandem and I installed it for the case when I had to use it
I'm wearing OHLINS, so I was worried that I wouldn't be able to install it, but as expected, I didn't have to I could not install it
Hydraulic Remote adjuster hose interferes with Helmet lock
A little ingenuity (I put Spacer on Tandem stay, and the key is also thin) I installed it with a spacer
Of course, if you don't have OHLINS installed, you can install them without a problem
View detail
Convenient to have
If you multiply the Mirror of Vfr800f by Helmet, it's unstable, and the Rear Sets I think the holder is a necessity when you don't use the Pannier case But I had a hard time to fit the Screw hole at the time of installation View detail
Helps with helmet storage and theft prevention.
When you go to a restaurant to eat, you bring a helmet. The helmet is bulky and sometimes difficult to store, but it is very convenient with the Helmet Lock. I also installed the GIVI Side Bag, which can be used without interference with the helmet. When you go to a restaurant to eat, you bring a helmet. In some cases, the helmet is bulky and difficult to store, but with Helmet Lock it is very comfortable. GIVI Side Bag is also installed and can be used without interference with the helmet. translated by Google Translator View detail
GSXR750L1, we are here with no problem
GSXR750L1 I arrived with no problem If you have it, you can feel safe even if you are on the go
No problems with the texture and feel of the humidor
View detail
I installed it on MONSTER1200S
This product (HDC-05009) is a helmet for the DucatiSUPER SPORTS750 lock, but I installed it on a 2020 MONSTER1200S
Perhaps, for MONSTER1200S (HDC-05002) can be installed in the current MODEL I don't think so
In the meantime, please do so at your own risk
View detail
it is also available for monster1200S
it can be installed on the monster1200S 2017 - MODEL
I just installed it and haven't used it yet, so I give it an overall rating of 4.2
View detail
"Rear Sets HelmetHook is hard to use! For those who feel that
I'm a person who doesn't like to put a Helmet on Mirror that I've taken off (and had it stolen once) (Because there is...)
It's a bit of a hassle to carry it around with you every time you get off the bike, though
So, until now, we've basically had the Rear Sets on every motorcycle I was using a HelmetHook, but this Motorcycle (GSX-S125/ (R125) is very difficult to use..
The Hook is a bit too short to thread the D Ring of the Helmet, and the Hook It is also attached to the Seat side (not the body side)
I'm sure the Helmet will fall off someday sooner or later I've been feeling that this is a good time to introduce it
The Left SideTandem stay is removed once and tightened together with the It's not difficult
In the manual It has a screw lock and it's hard but it doesn't have a Screw Lock, and even though it's tightened up so tightly, it's not There was not
The feel is fine
The key is Quantity:It comes with 2pc, but you can lose both of them "Repair parts" You can also purchase a single body with a key as well
(Not every key has an ID, but every groove is a quantity:Pair (for Left and Right) (Only two types in different positions)
However, the opposite is true "Key Single Body Only, Easy to Buy If someone else in Red has the same KIJIMA Helmet lock key, they can The key may be used to open the door
therefore Security I think it's a bit unsuitable for those who want to
the last "We'll hang it from the body temporarily I think it's best to recognize this as a thing
Despite this, it's still very convenient to hang it on your motorcycle! It is
View detail
Fits: HONDA ADV150, HONDA glom, KAWASAKI Z125 Pro, HONDA PCX125, HONDA PCX150, YAMAHA MAJESTYS, YAMAHA BWS(BWS), YAMAHA BWS125(BWS), KAWASAKI Z125 (16), HONDA ZOOMERX, HONDA DAX125
discreet and convenient
XR and MONKEY both have a helmet holder on the rear side which is easy to get dirty shooter
Hard to use
This one can be fixed to the Lever holder and is black in color, so it doesn't feel strange
You can take off your Helmet and lock it to the Holder while straddling the bike It's convenient
It is a shame that the Hook's rattling is surprisingly heavy (300g) Crimp at the base of the Large can be used I'm worried about the pins
Hard to turn the key (do you have a hang?) Is it a point?
View detail
Essential Items as much as ETC
Because it is a large Helmet to protect the head, it can not be placed on the ground, and if you hang it on the Mirror I think this is a must-have item to give damage to the inside of the Helmet (I think the Rear box is (Unless there is one)
During installation, Tandem Footpeg screws are applied screw lock and stop It is a little hard to remove it because it is a little hard When I installed it by one more person, I put it on while trying to be creative with the Rear Sets covered up
The shape and dimensions of the Tandem Footpeg are Exactly and the quality is excellent I'm glad I installed them
View detail
Fits: KAWASAKI VERSYS-X 250, KAWASAKI VERSYS-X 250 TOURER, KAWASAKI VERSYS-X 250, KAWASAKI VERSYS-X 250 TOURER
Installation is easy
the versys-x250 mounts the Holder to the Rear Carrier, so there is a I was hesitant to buy the Helmet because I was a little nervous about hanging it up, but I was able to get a Gel sub Since I installed it, I decided to buy it because I was too lazy to remove and wear the Seat There was no discomfort when I hung the Helmet It was possible to install it in about 10 minutes if I follow the Instruction Manual View detail
It comes with the GSX-R1000 K7, but..
As of November 2019, item number:303-1526 was for K9 to L6, but K7 It was also attached to the
However, because it was contacting the Frame a little bit, I made a handheld Washer bite it
I have no complaints about the feel of the product and it is very convenient
I should have put it on sooner
View detail
Fits: SUZUKI GSX-S1000F, SUZUKI GSX-S1000, SUZUKI GSX-S1000F, SUZUKI GSX-S1000
It's a good product without Rear Carrier
It took less than 10 minutes to install
our vehicle (GSX-S1000F) Now, we'll take a look at the bar with the DAYTONA's Rear Carrier and the Rear It is difficult to put a Helmet on because the Footpeg is in the way
I'm pondering how to deal with it
View detail
It will give you some peace of mind
The Helmet holder attached to the GSXR600k7 is difficult to use, so I was looking for it! At this point
There doesn't seem to be any special products available, so I bought this one for the R1000 based on the reviews of others
The base plate was bent a little and by changing the position of the Spacer, I was able to install it
If you're going touring on this motorcycle, you better put it on!
Much easier to use than the OEMHolder!
It looks and feels right
View detail
I'm glad I bought it
I've been looking for a place to hang a helmet with a Fender Eliminator I found this product, it takes about 5 to 10 minutes to install it, and when you hang it on the hook It was also easy to call
It alleviates the fear of theft
View detail
Satisfied
I went with the Fender Eliminator and was looking for a retrofit Helmet lock I found the
It was very easy to install Now I don't have to worry about the Helmet being stolen when I'm touring
View detail
Great Product for the XR
A well made helmet lock and bracket (both painted black). Very easy to install. When attached, it looks like it came from the factory. Put down the pillion footrest when locking your helmet. I found that the helmet locked most easily if you pulled the D ring strap to the left of the helmet and point the helmet neck opening directly to the ground when attaching it to the lock. Then rest the helmet on the pillion footrest once locked on. I can recommend this helmet lock. View detail
Fits: KAWASAKI VERSYS-X 250, KAWASAKI VERSYS-X 250 TOURER, KAWASAKI VERSYS-X 250, KAWASAKI VERSYS-X 250 TOURER
That would be very helpful
The VERSYSx250 has a HelmetHook underneath the Seat, so every single one of them is a hassle
It is very convenient to install the Holder under the Carrier It is very easy to install
View detail
Fits: HONDA ADV150, HONDA glom, KAWASAKI Z125 Pro, HONDA PCX125, HONDA PCX150, YAMAHA MAJESTYS, YAMAHA BWS(BWS), YAMAHA BWS125(BWS), KAWASAKI Z125 (16), HONDA ZOOMERX, HONDA DAX125
Convenience
When stopping the car, I had to take off the Seat and put on the Helmet every time, so I put these Parts on I was able to put on the half Cap without any problems The half Cap was able to be put on without any problem Next, I'll try to put on Full face as well View detail
Fits: BMW R1200GS, BMW R1200GSAdventure, BMW R1250GS, BMW R1250GSAdventure
Very good
I bought it as a back order because it was out of stock. Arrived on time and arrived safely. Haven't installed it yet, but it looks like it will be useful. I didn't have any storage space, so that would be good. When I leave the bike, I feel very comfortable and good because I only have to take off the Sena. I did not have the stock, so I bought it in the back order. I arrived safely at the right time. It is not yet installed, but it seems to be useful as well. I guess I do not have any storage space. When I leave the bike, I feel very comfortable to go to Senna Bay. translated by Google Translator View detail
It was for a Ducati Scrubber 800, so no rating
It was shown as being for the Ducati Scrubber Sixty2 It was for the Ducati Scrubber 800, so I couldn't put it on the Sixty2 I managed to machine it and install it View detail