Reviews
Easy installation, no brightness problems.
Until now, we had been using Type with LEDs affixed at the top and bottom, but the straightness of the LEDs was poor when Up is lit, so we always used the LEDs facing down.
This type of LEDs are affixed in the LeftRight type, so the straightness when the LEDs are up is also OK. This time, I installed it on a square eye light, but I think it would be best for a round eye light. Finally, I am satisfied with the brightness.
View detail
Fits: KAWASAKI ER-5, KAWASAKI GPX600R, KAWASAKI KLE500, KAWASAKI KLF220, KAWASAKI Eliminator 600, MAGNI 1000 Australia2, MOTOGUZZI 1000 Ditna RS, bimota YB-4, bimota YB-6, bimota Dietsch 1000, bimota Flannel 1000, HONDA CB1100F, HONDA CB1100R, KAWASAKI 1000GTR, KAWASAKI 250TR, KAWASAKI EN400, KAWASAKI EN500, KAWASAKI EX-4, KAWASAKI FX400R, KAWASAKI GPZ1000RX
Idling stabilized?
I changed the oil as part of maintenance, and it seems to have stabilized the idling, but I don't feel that the power is increased. I really don't know if the period to change the oil was too short and the oil was not so deteriorated, but it is an old motorcycle and I will replace the oil as soon as possible. Next time I will buy a Torque wrench and tighten it with the specified Torque. View detail
Lineup abundant and easy to find
I use it for various types of vehicles as if it were a regular product.
Never had a problem.
Even with external parts, there were some problems such as hardness of the hooks and subtle quality of the screw threads on other cars.
NTB offers a variety of car models and is inexpensive, and I use it often!
View detail
Fits: HONDA CB1100, HONDA CB1100 RS, HONDA CB1300SB, HONDA CB1300SF, HONDA CB1300SUPER FOUR SP, HONDA CB1300SUPER BOLD'OR SP
General Slider
The car was delivered with DAYTONA's Engine Guard installed.
Because I scraped it just by driving normally on a mountain road,
Changed to Slider.
I am concerned about Damage to the Motorcycle in the event of a fall.
View detail
Fits: YAMAHA MT-25, YAMAHA YZF-R3, YAMAHA MT-03, YAMAHA YZF-R25
It looks better now.
Model YZF-R25
The Rear is quite dirty and it is now clean. the Brake Caliper is OEM and the Pad is DAYTONA, but I am glad I replaced it. The braking power is normally increased and I am satisfied.
View detail
Difficulty in weather resistance
Why is it that everyone is so quick to exchange to NORMAL? I was wondering,
Now I know why. After about a year of storage under the eaves, the surface hardens.
ParisParis and tear it up.
View detail
Valuable Exchange
Model YZF-R25
I replaced the Disc Rotor and all front brakes are now brembo. I am very satisfied and it was a worthwhile replacement. You can tell the difference from the moment you change.
View detail
Large satisfied
Installed in CHALY.
It needed a little modification for the CUB, but it is quite good for a little flippant shopping.
View detail
Ideal for Driven Sprocket Nut
I purchased the 12mm to replace the Driven Sprocket on my KLX125.
As a result, I am satisfied with Large!
If you have ever replaced the Driven Sprocket on a KLX125, you will know that when holding the Nut on the Driven Sprocket, the Neck is where the Rim/Tire is located.
LongGlasses/Spanners interfere with the Rim/Tire, so the tool must be hung on the Slant, while ShortGlasses and normal length Spanners are too short to hang the Torque.
I had been using Long spanner, but I thought it was not a good idea, so I bought this one.
Good point #1.:Moderate Offset
The handle and Glasses section are moderately offset so that the Nut can be held without interfering with the Rim/Tire.
Good point #2.:thin
Related to (1), it is made thin and does not interfere with the Rim/Tire.
Good point #3.:No counterbore in the Glasses area.
They have eliminated the counterbore, so the Nut can be held firmly even at this thinness.
Good point #4.:Simply cool
I like UNIT tools and have several of them, they are cool.
The ruggedness of the black color, the UNIT logo shining on it, and the gentleness of the handle covered with rubber.
It's a hobby of mine, but I just can't get enough of this coolness.
It is not so frequently used for personal use, but it is very useful when replacing a Driven Sprocket! It is a very useful tool when you need to replace a Driven Sprocket.
When in doubt, buy. Please try it out at Su Chest in
View detail
It gets pretty hot.
As expected of a genuine product. The grip is comfortable. The temperature rises to the point of being hot when set to high. I survived one winter with winter gloves and this grip heater. In the middle of winter, there may be nothing better than electric heated gloves (I have never used them, so I can't say for sure...), but the best thing is that it is easy to use without the hassle of connecting an electric cord to the glove when using it, and it extends the use season of Pairslove leather gloves, which I use most during the touring season. The biggest advantage is that I can extend the use season of Pairslove leather gloves, which have been my most favorite during the touring season. After all, it is nice to be able to use familiar gloves that winter gloves and electric gloves do not have. There are cheaper external products available, but if you want to use them for a long time, genuine products have a different sense of security. We highly recommend them. View detail
Evolution!
I had been wearing Tech3s for about 10 years and decided to buy new Boots due to a ripped Buckle.
I bought a Tech5 in a color like Doraemon. I like it very much because it is a rare color.
I tried them on right away and they are just the right amount of softness and the size is just right. (26.5cm) The same size was perfect.
The buckle fastening method has evolved. The previous boots had to be removed forcefully, but the structure has been changed to make it easier to remove the buckle.
I was too tired to take them off after a ride, but with these Boots I was able to take them off right away.
I plan to stay with these Boots for a long time until they break too.
View detail
for Race, it seems.
I didn't like how thin the swing arm of the NS-1 was back then, so now that I'm a large person, I decided to secretly buy one without telling my wife and secretly install it.
The design looks good, the Installation Instruction Manual is missing and I know that I have to buy it.
"For Race" and the enclosed handwritten paper stated (^_^;)
I thought it was very important information that I wanted to know before I bought the car. I am a little worried.
View detail
Brake to JackKnife if you apply it strongly ".
This was the first time for me to use the Metal pad, but I have the impression that it works harder than the previous Golden pad.
I grabbed Lever with my usual BrakePoint and it worked so well that I JackKnife'd it unexpectedly.
We are still waiting to confirm the durability of the product, but as for the effectiveness, we are satisfied with it.
View detail
It works as if it were sucked into place.
This time, the pad was also replaced with a NTB pad at the same time. The response when operating the pad is smooth and it works as if it were sucked in. I have replaced other brands at the same time, but this is the first time I have used BrakeTouch like this. View detail
Excellent braking performance.
I used to use Shoe of other brands, but this time I used NTB for the first time. I don't feel much change in the effect, but the brake noise during operation has been eliminated. It feels good. View detail
Easy to install!
Installation was easy.
Japanese Vehicle Inspection Correspondence, but I think the sound is too loud.
But it's cool, so I'm satisfied.
View detail
unexpectedly large
I like the design, it fits a lot, it's easy to wear, and there's nothing to complain about.
The photo shows it on a CT125 Rear Carrier. It is huge.
View detail
I miss the colors and design.
Good old-fashioned color and design. View detail
Fits: DUCATI SCRAMBLER DS FASTHOUSE, DUCATI SUPERSPORT 620, DUCATI MULTISTRADA 1200 PIKES PEAK, DUCATI MULTISTRADA 1200 S, DUCATI ST3, DUCATI SPORT 1000 S, DUCATI MONSTER 795, DUCATI DIAVEL 1200, DUCATI SCRAMBLER NIGHTSHIFT, DUCATI SCRAMBLER MACH 2.0, DUCATI SCRAMBLER CAFE RACER, DUCATI SCRAMBLER DESERT SLED, DUCATI SCRAMBLER ITALIA INDEPENDENT, DUCATI SCRAMBLER FLAT TRACK PRO, DUCATI SCRAMBLER URBAN ENDURO, DUCATI SCRAMBLER STREET CLASSIC, DUCATI SCRAMBLER CLASSIC, DUCATI SCRAMBLER FULL THROTTLE, DUCATI SCRAMBLER ICON, DUCATI SUPERSPORT 750
The maintenance improvement after installation and the visual design is great, but …...
It's no surprise that Doka's dry Clutch is a natural choice for OpeningCover.
Wet Clutch cover. [Color] When set to Clear, the Impact of the visual design is the best!
However, when the difference in temperature is extreme, condensation and emulsification on the Glass surface is very severe. When the difference in temperature is extreme, condensation and emulsification on the glass surface is very severe.
It's dirty and you can't see what's inside, so it's kind of a bad parenthesis (laughs).
However, switching to this Cover will super reduce the hassle when changing clutches!
Since only the clear part is removed from the O-ring, there is no need to peel & attach the liquid gasket.
OIL is also hardly reduced, so that's great to think about!
I think the price is about the same considering the design and quality of workmanship.
What others think of this price for this part is...
View detail
Fits: Others E470, Others E370, Others E340
GIVI is still good
Motorcycle top cases are all the same, right? You may think, "What's the difference between a motorcycle top case and a top case?
However, the difference is that GIVI has a good lineup of repair parts.
I believe Top case does not need a key.
It is troublesome that both GIVI and other Manufacturers have a mechanism that prevents the lock from coming off unless it is locked.
GIVI, in fact, can be unlocked with a little modification,
However, this process will result in a demerit that will make it impossible to lock the door,
In the first place, I think it is strange to put something that is not good to be stolen in Motorcycle's Top case.
When you remove the key, you will see red plastic on the reverse side, so you just need to cut the part that is caught by the key.
At any rate, the Impression this time was that GIVI is a good company with a solid lineup of Repair Parts.
View detail