Reviews
for Replacement
I bought it because the product description said it was for Hose I.D. 8/9mm, but the Package of the actual product has a compatible Hose I.D. 8mm. I wanted to have Φ9 correspondence. At any rate, I put it on and will try to see, but it may be a little too small.
The thing is Compact and it doesn't look bad.
View detail
Easy to fit L-Type
I bought a larger Filter with Magnet, but when I put it on, it was tighter than I thought it would be and I was worried about losing gas if the hose broke.
I was satisfied because I was able to reduce the Curve of the Hose by introducing the L-Type, and as a result, I was able to handle the Hose with ease.
If you want, it would be good if there is a large with Magnet.
View detail
kawasaki 250TR
When I installed the fat type fuel filter by Straight on the Kawasaki 250TR of the Carburetor vehicle.
I was worried because the filter was close to the cylinder fin and it was deformed by a little heat.
I installed this 90-degrees bend type one.
It can also escape from the fins and is safe to use.
I just wish the price was a little lower.
View detail
Good to have a visual on the fuel.
[How is it used?
OEM replacement.
The fuel line is visible and easy to understand.
Recognize abnormalities in the tank immediately.
Was the one you received as per Image?
Yes
Was the installation difficult?
No, sir.
Oil Resistant Hose is required. Caution is required.
How was your experience with it?
OK
[Included Parts:were they on?
None
[Was there anything that disappointed you?
None
Cheap and Kan Tan.
View detail
I chose the Magnet type.
I tried to remove the rust from the tank, but it was not done properly, and there was a clogging of the carburetor jets with fine iron powder.
It doesn't remove 100%, but I think it's more effective than just Mesh filterType.
However, the durability of the body is not good, and the insertion port broke from the root when removing and installing Hose in about one year.
View detail
Mounted as a fuel fliter for Fuel Sub Tank
As you can see in the picture, it is used as a fuel fliter for Fuel Sub Tank.
I tried to install it on my car, but the transparent part is made of glass and I was worried about fuel leakage, so I had no other use for it.
The gasoline transferred to the fuel Sub tank is contaminated with Garbage, and we can stop the Garbage from entering here.
I think this kind of usage is also possible.
The video shows the Carburetor tuning using this Sub tank.
View detail
Fuel fliter
The carburetor is an FCR Carburetor Body33, but the Filter:It's not like you're going to run out of fuel. View detail
Make the most of the small space.
I bought a Straight Filter, but I changed it to this one because the hose seemed to break due to its handling.
When I used it in an image to put in the part that seems to be broken, the handling of the Hose is no longer unreasonable.
However, the Filter section is not very reliable.
It's a good idea to have a with Magnet L-Type for 6?hose because the body can be a bit larger.
View detail
easy to deal with
I bought Straight Type with Magnet and tried to install it, but it was impossible to handle it, and it seemed to cause Hose breakage at the part where the R was too tight, so I bought this one.
It's easy to use and has a high degree of freedom in handling.
I'm a little worried about its ability as a filter because the Size is small and there is no Magnet in it.
View detail
Thanks it respond the model and looks good on my motor, the material is excellent, i think it will last for a long time, easy to install and easy to clean, i hope it can be use for a long time, good price, thanks Kijima & Webike i think i will buy 1 or 2 pcs more for spare. View detail
One
There were two Filters in the image
Quantity without permission:I thought it was 1 Set of 2pcs
Other than that, it looks fine
View detail
Parenthesis is good
I used it on my 2004 SR400, the texture of the gold is good and it's really cool But it's bigger and heavier than I imagined
I connected it with the fuel hose of KIJIMA, but it had a hard time to handle It is big and the hose is broken
I may be the only one, but the top and bottom gold genus parts were loose when the package was opened It's a good idea Gasoline will leak if it is installed without being opened Please re-tighten it
The basic performance and looks are really good
View detail
OEM and above
no matter how many times I cleaned the carburetor, the rust would come off, so for now, the Fuel fliter I bought it to replace the Essentially, the rust is from the Tank, so I had to treat the Tank for rust first, but time As a band-aid, since there is none
When I took apart the OEM Filter, I found the magnet, but no Filter The Garbage that the magnet couldn't get rid of must have fallen into the carburetor The product I purchased has both the Filter and the magnet, so for now, it's safe & secure hellip;… I think But it's a little bit larger than the OEM Filter, so it's pretty much a limit on the size of the Filter Maybe it's interfering somewhere …… …
View detail
I was able to replace it cheaper than the OEM Product!
I used it on a '92 FZX250ZeaL Restore
OEM parts are expensive because the OEM fuel fliter was not replaced from new I installed this one because it was
The Fuel Hose was also replaced at the same time, so it was easy to install and used with no problems
View detail
Filter:angled with o
Due to the tank diversion and carburetor changes, I had to squeeze a lot of things into the small space So I used it
Since the tank is also old, Garbage and rust can be countermeasures to prevent carburetor from entering the tank I was able to change the angle to a right angle, which was helpful
At first glance, I couldn't tell which way it was pointing, but you can tell if you look at it properly because it has an arrow engraved on it
View detail
To make you feel better?
There's also an OEM Filter inside FuelCook and carburetor
Originally, it was not necessary, but I installed it because it was a relief to have it
Size is Compact and you don't have to worry about the location
It also feels like it has a secure flow rate, which is common in shoddy products
I don't think there is a lack of gasoline flow when running at full throttle
View detail
It doesn't work as a filter
This will not make the Garbage disappear from the Float chamber, even if you use it In Gold netting, fine Garbage will pass through It didn't make any difference whether it was there or not View detail
Cost performance is outstanding!
Many fuel filters are designed to be attached vertically There is no problem even if you use it horizontally, but if you use it in such a way A pool of air will form in the filter and some of the filter paper will not be able to get into the Gasoline It means that there is less surface area to filter the Gasoline It's a small thing, but it's not very pleasant
This product is designed for horizontal installation from the beginning It's easy to install, just cut the fuel hose and insert it into the hose It has to be, though
Since the body is transparent, it's easy to see how dirty the Filter is
View detail
gasoline filter
Gasoline filter from kijima, the filter can filter fuel well. Can collect unwanted dust and debris from the added fuel. A gas filter from the kijima filter can filter the fuel well. Can collect dust and unwanted particles from the fuel. To not enter the ID system as well.(translated by Google Translator) View detail
gasoline filter
Gasoline filter from kijima. The filter uses good materials. Benzene is not corrosive. The inner filter captures dust and debris very well. Small, compact, easy to install Filtered gasoline from kijima filter material well. Gasoline is not corrosive. The inner filter can trap dust and debris. Small, easy to install.(translated by Google Translator) View detail