Reviews
Fits: YAMAHA TZR50, HONDA BENLY50CD90, HONDA XL80, HONDA XR100, HONDA XL50, HONDA NSR50, HONDA NSR80, HONDA NS50F, HONDA NS-1, HONDA CRM80, HONDA MBX50, HONDA CRM50, HONDA CR80R/RII, YAMAHA TZM50R
Convenient to have
I bought this tool to remove the clutch lock nut on my NSR50. It is not impossible to remove the clutch lock nut without this tool, but it is safer to use this tool because the lock nut is tightened by a considerable torque. The feel of using this tool is not as accurate as the DrumstickDrumstick, so it is difficult to apply force if you do not support the tool when using it. If you have an Impact wrench, you may not have to worry about this kind of feeling. View detail
Fits: YAMAHA TZR50, HONDA BENLY50CD90, HONDA XL80, HONDA XR100, HONDA XL50, HONDA NSR50, HONDA NSR80, HONDA NS50F, HONDA NS-1, HONDA CRM80, HONDA MBX50, HONDA CRM50, HONDA CR80R/RII, YAMAHA TZM50R
KITACO after all
When I first bought a cheap one for about 2000 yen, the shaft was off and the tool wouldn't fit. This one is a little more expensive, but it fits easily and I regretted that I should have bought this one from the beginning. View detail
Fits: YAMAHA TZR50, HONDA BENLY50CD90, HONDA XL80, HONDA XR100, HONDA XL50, HONDA NSR50, HONDA NSR80, HONDA NS50F, HONDA NS-1, HONDA CRM80, HONDA MBX50, HONDA CRM50, HONDA CR80R/RII, YAMAHA TZM50R
Essential tool for Clutch Maintenance
This is required for the maintenance of the NSR50 Clutch.
When you remove the nut, you can use Impact Driver to remove the center check nut, but when you install it, you will need to use Torque wrench to tighten it with proper torque.
View detail
Fits: YAMAHA TZR50, HONDA BENLY50CD90, HONDA XL80, HONDA XR100, HONDA XL50, HONDA NSR50, HONDA NSR80, HONDA NS50F, HONDA NS-1, HONDA CRM80, HONDA MBX50, HONDA CRM50, HONDA CR80R/RII, YAMAHA TZM50R
It is necessary for maintenance of Mini bike race
I use it to unlock the Center's Lock nut when disassembling Clutch.
Without this, the NSR type Engine can not be serviced.
It is an essential item..
View detail
Fits: YAMAHA TZR50, HONDA BENLY50CD90, HONDA XL80, HONDA XR100, HONDA XL50, HONDA NSR50, HONDA NSR80, HONDA NS50F, HONDA NS-1, HONDA CRM80, HONDA MBX50, HONDA CRM50, HONDA CR80R/RII, YAMAHA TZM50R
Purchased for Clutch exchange of NSR 50
In order to exchange Clutch in NSR 50, I bought a cheap import tool, but it was too accurate and was not going to be usable, so I thought it would be safe if it was a product of KITACO.
The feeling I tried can be used normally as a tool.
Rather than buying a tool that can not be used cheaply, it is cheaper to buy a tool that can be used at ease at reasonable price.
View detail
Fits: YAMAHA TZR50, HONDA BENLY50CD90, HONDA XL80, HONDA XR100, HONDA XL50, HONDA NSR50, HONDA NSR80, HONDA NS50F, HONDA NS-1, HONDA CRM80, HONDA MBX50, HONDA CRM50, HONDA CR80R/RII, YAMAHA TZM50R
Although a Package did not have a statement, it has been used also by HORNET (250 cc). Clutch exchange requires a 27-mm Socket wrench other than this product. Be careful in the case of exchange.
Although a Package did not have a statement, it has been used also by HORNET (250 cc). Clutch exchange requires a 27-mm Socket wrench other than this product. Be careful in the case of exchange. View detail
Fits: YAMAHA TZR50, HONDA BENLY50CD90, HONDA XL80, HONDA XR100, HONDA XL50, HONDA NSR50, HONDA NSR80, HONDA NS50F, HONDA NS-1, HONDA CRM80, HONDA MBX50, HONDA CRM50, HONDA CR80R/RII, YAMAHA TZM50R
It certainly becomes an indispensable Items for Clutch exchange of the Engine of NSR50 system. Certainly [ since Torque management etc. were not completed also when removing also attached when there was this / no /, direction this tool always fixed ]. T
It certainly becomes an indispensable Items for Clutch exchange of the Engine of NSR50 system.
Certainly [ since Torque management etc. were not completed also when removing also attached when there was this / no /, direction this tool always fixed ].
The friend failed without this tool, and damaged the Pressure plate, and big-ticket expense is needed the other day [
].
Goods are solid, and since it is not so expensive, I want you to fix them by this tool by all means with very easy-to-use goods considerably.
View detail
Fits: YAMAHA TZR50, HONDA BENLY50CD90, HONDA XL80, HONDA XR100, HONDA XL50, HONDA NSR50, HONDA NSR80, HONDA NS50F, HONDA NS-1, HONDA CRM80, HONDA MBX50, HONDA CRM50, HONDA CR80R/RII, YAMAHA TZM50R
It purchased on the occasion of Clutch O/H of NS-1. There is only exclusive elegance too and greatest sense of security and working efficiency rise considerably. Probably, the confidence which is not broken is a tool which should be purch
It purchased on the occasion of Clutch O/H of NS-1.
There is only exclusive elegance too and greatest sense of security and working efficiency rise considerably.
Probably, the confidence which is not broken is a tool which should be purchased if you consider working efficiency even if it is, since a Housing may be destroyed if
NS system is a poor way.
However, I thought that they were expenses a little painful as a tool which he buys too for the fixation at the time of loosening the Clutch-center Lock nut of a NS system
.
Unless it has carried out also in the
Race, it is the frequency whether it uses per year once, or not to use.
if you buy one, carrying out only
-- me -- unless it does not lose like or destroys -- about -- since it will be 1 student mono-
, cheap shopping can be taken if it thinks so.
We recommend you purchase also in the sense of
working efficiency Up or insurance.
View detail
Fits: YAMAHA TZR50, HONDA BENLY50CD90, HONDA XL80, HONDA XR100, HONDA XL50, HONDA NSR50, HONDA NSR80, HONDA NS50F, HONDA NS-1, HONDA CRM80, HONDA MBX50, HONDA CRM50, HONDA CR80R/RII, YAMAHA TZM50R
[Webike Monitor] Although there was that the Manufacturer of the VOX of the Lock nut is also different, the VOX side of a Lock nut was large, did not pass along the hole of middle, and did not use after all. It seems to be better to actuall
[Webike Monitor] Although there was that the Manufacturer of the VOX of the
Lock nut is also different, the VOX side of a Lock nut was large, did not pass along the hole of middle, and did not use after all.
It seems to be better to actually see and buy a thing.
Or [ that
or the Brand is good ]
View detail
Fits: YAMAHA TZR50, HONDA BENLY50CD90, HONDA XL80, HONDA XR100, HONDA XL50, HONDA NSR50, HONDA NSR80, HONDA NS50F, HONDA NS-1, HONDA CRM80, HONDA MBX50, HONDA CRM50, HONDA CR80R/RII, YAMAHA TZM50R
It was used on the occasion of clutch exchange of CBR250R. It was quite easy-to-use, and it has worked, without a grip being slippery also by the hand wet from oil!
It was used on the occasion of clutch exchange of CBR250R.
It was quite easy-to-use, and it has worked, without a grip being slippery also by the hand wet from oil!
View detail
It was used at the time of disassembly of a clutch. Since it was easy-to-use, it was good!
It was used at the time of disassembly of a clutch.
Since it was easy-to-use, it was good!
View detail
Fits: YAMAHA TZR50, HONDA BENLY50CD90, HONDA XL80, HONDA XR100, HONDA XL50, HONDA NSR50, HONDA NSR80, HONDA NS50F, HONDA NS-1, HONDA CRM80, HONDA MBX50, HONDA CRM50, HONDA CR80R/RII, YAMAHA TZM50R
It is a specialized tool of NSR50 required in the case of clutch decomposition. A clutch cannot be removed unless there are this and a center check nut wrench. It was actually able to be used and the clutch was able to be desorbed especially satis
It is a specialized tool of NSR50 required in the case of clutch decomposition.
A clutch cannot be removed unless there are this and a center check nut wrench.
It was actually able to be used and the clutch was able to be desorbed especially satisfactorily.
View detail
Fits: YAMAHA TZR50, HONDA BENLY50CD90, HONDA XL80, HONDA XR100, HONDA XL50, HONDA NSR50, HONDA NSR80, HONDA NS50F, HONDA NS-1, HONDA CRM80, HONDA MBX50, HONDA CRM50, HONDA CR80R/RII, YAMAHA TZM50R
Does it say [ that what is not is a large difference if there is this although purchased for clutch exchange ]? It is indispensable rather. if there is this when specification torque loosens and fastens a large lock nut although it is sad that there a
Does it say [ that what is not is a large difference if there is this although purchased for clutch exchange ]? It is indispensable rather.
if there is this when specification torque loosens and fastens a large lock nut although it is sad that there are few 1 time of use counts -- easily -- it is -- it is recommended.
View detail
Fits: YAMAHA TZR50, HONDA BENLY50CD90, HONDA XL80, HONDA XR100, HONDA XL50, HONDA NSR50, HONDA NSR80, HONDA NS50F, HONDA NS-1, HONDA CRM80, HONDA MBX50, HONDA CRM50, HONDA CR80R/RII, YAMAHA TZM50R
The special tool was not used until now. If this is used, clutch exchange can be performed easily by itself. It is easy to fix!
The special tool was not used until now.
If this is used, clutch exchange can be performed easily by itself.
It is easy to fix!
View detail
It is better to be in exchanging purity and a pure type (strengthening) clutch absolutely. Since power is applied considerably, the one to a slight degree where a handle is longer thinks that it is easy to put in power. Since it is a tool which ca
It is better to be in exchanging purity and a pure type (strengthening) clutch absolutely.
Since power is applied considerably, the one to a slight degree where a handle is longer thinks that it is easy to put in power.
Since it is a tool which can be used only for clutch exchange, I am glad if the price is cheap to a slight degree.
View detail