Texture

The quality is excellent. As other reviewers have said, the weight of the Single Item ensures visibility and does not shake due to vibration. Of course, the Mirror section is smaller than the OEM section, so visibility is lower. However, this is not a problem for me, as I can adjust the size of the Mirror section to my preference. View detail

textured good feeling

I am satisfied with the texture and design. The adjustment can be set in detail. It would be even better if the Mirror section could be moved up and down, even if only a little. View detail

The product is as expected.

I am satisfied with the quality and design, and I think it is worth the price, especially with features such as the Turner. [Color] If you can Clear, I have no complaints. View detail

Refreshingly, the Mirror position is lower and the viewing angle is wider.

When the Center Stand was set up, it did not look that different, but the Side Stand of the INT650 is much shorter than other models, so the height of the Right Side Mirror is extremely noticeable.
I wanted to replace it with a shorter Mirror, but even if I find a small, good-looking Mirror, most of them are not Japanese Vehicle Inspection Correspondence products from 2018 or later.
However, this product is a Japanese Vehicle Inspection Correspondence product.
So I could choose with confidence.
When installing the INT650, an adapter for the Opposite Thread Screw is required because the screw hole in the RightMirror is an Opposite Thread Screw.

For installation, 19mm and 17mm Wrench are required.

The texture of the plating is nice and not cheap, and I am also satisfied with the functionality of the Mirror viewing angle.
However, when held, MirrorBody is Material:Plastic is lightweight and has no sense of weight, so it feels a little cheap there.
I have to touch it to understand.

When asked if I would recommend it, I can confidently recommend it to others. View detail

Fashion

Very readable and stylish Mirror! View detail

Safety! Relief! He is smart!!

Safety! Relief! He is smart!! View detail

Cute Design like ants' antennae.

[How is it used?
OEMMirror has a long bracket section and the Mirror section is far away, making it easier for the driver to check the rearward direction of the vehicle while driving.:Pair (for Left and Right) (I think this is because the SV650X has a Mirror Holder on the handlebar of the Separate type, and the posture of the SV650X is slightly more forward leaning than the Standard type, so the distance between the head and the Mirror is closer. (This is just my personal opinion)
If the Mirror part can be moved forward from the mounting point, the viewpoint can be moved away and the head can be moved to the Quantity when checking the rearward direction.:Pair (for Left and Right) I installed this product thinking that it would be possible to check by simply shifting the line of sight without swinging to the I installed this product thinking that it would be possible to check by simply shifting the line of sight without having to shake it.

Was the one you received as per Image?
It would have been better if the bracket was just a little bit thinner. The product was generally in line with the Image.

Was the installation difficult?
It is easy to install as it is, but for some reason, the height of the Mirror Holder on the SV650X is Quantity:Pair (for Left and Right) Adapter (sold separately) is processed to be different in Quantity:Pair (for Left and Right) height.

How was your experience with it?
Quantity in the head as the viewpoint is far away from the target.:Pair (for Left and Right) Stress was eliminated by making it easier to check the rearward direction by simply moving the eyes without swinging the head to the left or right.

[Included Parts:were they on?
Each MirrorQuantity:1 Set (for Right and for Left sold separately) only, no Included Parts:.

[Was there anything that disappointed you?
It's a very personal impression, but it looks Heavy. It's like you can see...

0Other items that may be useful include
Point and hang of installation
The right side mirror will interfere with the reserver tank of the brake when twisted in due to the shape of the bracket, so it is better to remove the bolt at the bracket before installation.

[Availability and clarity of the Instruction Manual
There is no Instruction Manual, but it is not necessary because the product is easy to understand.

[Notes]
Not particularly

[ITEMS TO BUY TOGETHER
If you install it on SV650X like I did, the height of Mirror Holder is Quantity:Pair (for Left and Right) They are different, so you either buy an Adapter to adjust them or you don't care about the difference in height.

[Opinions and requests to Manufacturer
I appreciate your lineup of Mirror of various designs, and I look forward to your continued lineup and new Mirror designs in the future. View detail

Stable TANAX NapoleonOnMirror.

Stable TANAX NapoleonOnMirror.
A gem that is both visually appealing and easy to see.
However, the paint will surely peel off if you do not wrap the curing tape for installation. View detail

Lock nut defective

When I tried to install it, the lock nut did not work. I thought it was strange and loosened it, but it was licked.
What do you mean you just bought it and never tightened it and it's still licking?
I will never buy these products again!!! View detail

Not cheap!

Anyway, Parenthesis is good and
I'm Firmly!
I don't know why you all are so concerned about the weight.
Firmly and only because it's heavy.
It's not freaked out, it's stable! View detail

It's better this way...

After failing with the Mirror, which I bought from South America Site via Y video, I bought the Koch again, and it was the right choice.
It's easy to install and adjust, and the installation can be done with Zero parts other than Screw and Body.
The 10mm screw is Exactly for PCX, and it is Firmly attached to the PCX, so it is not likely to rattle for a while.
In general, all parts are hard, and the operating range is narrower than I expected, but the Mirror is easy to see, and I can guess that the quality is good. View detail

My favorite!

Very easy to see.
But! I bought this because one of them was damaged by moss.
It is very easy to see because it can be offset to the back. The height can be adjusted, and the width can be adjusted without changing the height by using the Extension Bracket.
It can be said that heavy is a disadvantage, but I think that there is enough Merit to compensate for it.
Communal to Left/Right is also ○○. View detail

Rear visibility is good.

Rearward visibility is good. There is no vibration blur.
Blue lens is also high quality and cut the glare.
I think Design is a love it or hate it thing. View detail

Stable brand. Freedom of position.

Stable Napoleon On
It's nice because it looks different from the cheesy looking ones at Plastic!
It's easy to use because it has a high degree of freedom to adjust its position.
I've been looking for a short Mirror for city riding, and I like the fact that it's not too out there.
I just need to get him out of the house a little more! Then, you can use the Adapter and you'll be fine! View detail

I decided on a formality

The product image is Silver, but I bought the Black one!

I chose this product because of its compatibility with the Hand guard
It had to be something that could be placed low and not cost too much

Anyway, it is heavy though the shape is Large strange good
Be careful not to drop it and break it if you're not careful when installing it
Also, when loosening the screw at the vertical angle adjustment, the mirror part should not fall off (or turn) Lever will hit you directly if you don't keep it propped up (or else)

No Opposite Thread ScrewAdapter is required for the GSR250
View detail

Not complaining

Although the durability of the movable joint part was uneasy at the time of purchase consideration, there is nothing wrong. I bought it, but it did not readily fade, and the Screw club rusted in the rain and Brown did not happen that the plain comes out.
I saw vibrations and invisible or inflexible, but because it depends on the degree of freedom of the installation place and the situation of vibration depending on the type of car, Mirror that thing does not bleed and it reflects on the area of ??the mirror. View detail

It is an ordinary Mirror

Until now, it was Mirror of the Gold tone, but Collar of the car body is White and Black colors, so I chose this Mirror because I wanted to change to Mirror of Black color. Since installation can be installed without changing the direction of Screw, (Adapter) You do not need. View detail

CoolMirror at Japanese Vehicle Inspection Correspondence

Is Forme Cool low?
I thought it was a purchase.
I was prepared, but the visibility is not good.
Since the GSR 400 itself vibrates around the Handlebar in a certain range of rotation, it blurs out the back.
Parenthesis is good, but I am considering other Mirror. View detail

It is a very satisfactory product

I was attaching StingMirror, but I was disliked Plating's Glaringly and I was looking for Spiry Black's Mirror. I reviewed various reviews and decided on this Mirror.
I am very happy with Matching over than I thought. View detail

Inexpensive and popular Mirror

It installed in ADDRESS V 125.
Left is OEMMirror and Right is Lute mirror so that pictures are easier to compare with OEM.

Compared to a wide range from a large Large OEM Mirror it will be Compact one by one, but in order to improve the visibility behind, I think that it is different from the Mirror that makes the main function secondary since it is made offset forward.
Also, actually running and seeing the blur of Mirror etc etc. I can not feel at all.

It was as I intended, but there are also points to worry about.
One is the weight of Mirror. Although it is a sense, MirrorOne Side is only several times heavier than OEM. Although I do not feel it, I feel that weight becomes heavy as a function Down, and I do not like it much as an individual.

The second is painting.
I chose Plating, but when I look at the condition it is relatively early to rust etc etc. I felt easy to occur.
I will use it here to judge.

Overall, I think that COSPA is a good product.
By the way, since the installation Nut of the product was 19 mm, there is no Clearance in the Brake fluidReserve tank and Mirror installation position like the Address, so Nut can not be rotated if it is quackly (It may be Case that there are not many other than the original tea).
In that case, separately purchase Spacer for height adjustment or Home centeretc. Smooth when working from being prepared Spacer with. View detail