Reviews
Exactly for Light Van Transporter
Foldable and Compact! View detail
To be mounted in the car.
It is useful for in-vehicle use.
Large size is reasonable, foldable, not that heavy, and not too expensive. 1pc. is convenient to have.
View detail
It is both light and strong.
I bought a new Transporter, so I bought a Ladder rail to go with it. (Lamp) I was looking for a product and found this product and purchased it.
The deciding factor is the length when folded.
The 150 cm short length is not collapsible and remains long.
However, with this 180cmMODEL, the length can be reduced by about half by folding it.
The small size of the Transporter was EXACTLY what I needed to save a little space.
The hybrid structure of resin and gold seems to be the right material for the right job. I was impressed by the balance between lightness and durability. In my case, the load capacity is sufficient because my motorcycle is only a light off-road vehicle or CUB.
The quality and price are in line with each other, and the cost performance is as good as you would expect from a DirtFreak product.
View detail
It is light and easy to use, but...
It is light and easy to handle. However, when used near its load-bearing capacity, the black plastic part and the aluminum frame began to bend. Although it has not broken yet, it is recommended to use it with a margin for weight. View detail
-- DRC:hybrid lamp straight type product number: -- D36-41-115 merchandise-information goods details size: -- 20 cm x 150-cm withstand load restrictions: -- it is the lightweight loading ramp borne by the way of thinking new 210 kg. With the combinati
-- DRC:hybrid lamp straight type product number: -- D36-41-115 merchandise-information goods details size: -- 20 cm x 150-cm withstand load restrictions: -- it is the lightweight loading ramp borne by the way of thinking new 210 kg.
With the combination of the resin panel developed by new technique, and an aluminum extruded material, it succeeded in the weight saving from the conventional loading ramp made from aluminum.
The withstand load engine performance of a resin panel is enough, and it can bear the weight of an off-road motorcycle calmly.
With the form of the design only for a motorcycle, it is proud of preeminent sense of stability.
The rubber is stuck on the flesh side of the plate hung on a transporter, and a transporter is not damaged.
The best size can be chosen as its transporter by abundant size deployment.
View detail
Just the right length for MINI, etc.
Just the right length to load in a light van without folding it up
Ideal for Mini bike
Might the gradient be steeper and harder to pack in a 250ccClass?
View detail
Structure to prevent scratching the car
[How is it used?
Step WGN as a new Transporter (RF3) I bought this product because I needed it for loading and unloading my motorcycle. This product comes in three different lengths, and I chose the middle length. I chose the middle length. If it is not long enough, it will rub the motorcycle the moment I put it in the cargo area, as the slope is too steep to load and unload a large motorcycle with a low belly.
Was the one you received as per Image?
As expected of aluminum, it is light. Since it is foldable, it does not take up much space.
The colors are good and casual.
The orange plastic part at the joint interfered with the ladder and prevented it from being straight.
I thought it might be a problem, so I asked someone who was already using it, and he said that it was designed that way, and that it would eventually wear out and straighten out. I wondered if there was a reason for the shape of the Ladder, because some of the other Ladder models have a slightly raised center.
How was your experience with it?
Loading and unloading the off-road vehicle was no problem at all. However, when loading and unloading the PCX, which has a low underbelly, the Under Cowl got stuck and I had to use the Power Play. I wonder if it would have been better to go up a size...
One of the major reasons why I chose this product was because I thought the material used for the part that hooks onto the car body was rubber, which would not scratch the car body. After using it, I can say for sure that it does not scratch. This is good.
[Points to note]
If you have a wallet and cargo space to spare, I would recommend buying the longest one possible. (I have some regrets)
As mentioned above, some Cases may not be exactly straight at first.
The height of the edge next to the Ladder is not very high, so be careful not to break the wheel.
How did it compare to other products?
I have used a non-Aluminum Ladder, but the Aluminum is clearly lighter.
Other items that would be helpful
Installation points and hang/Items to buy together/ Opinions and requests to the Manufacturer
If you buy a Transporter, you should also buy a Tie Down Belt.
View detail
Compact
[How is it used?
I use it to put my Off car on High ace.
I used to use Straight's DRC Lamp, but it was too long and I had trouble storing it, so I replaced it with this foldable one.
Was the one you received as per Image?
As per Image
It feels a little heavier than I was expecting.
How was your experience with it?
It can be folded so that it can be loaded vertically, and of course it fits under the belly of the Motorcycle as shown in the photo, so you can use the space effectively.
It's great because I load three cars or a stupid load.
[Included Parts:were they on?
Not particularly
[Was there anything that disappointed you?
Not particularly
Other items that would be helpful
Installation points and hang/Availability and clarity of the Instruction Manual/Points to consider/Items to purchase/Opinions and requests to the Manufacturer
The Rubber of the foot is a Replace product, so buy it when it is gone.
Hybrid Lamp Replacement Foot Rubber (https://www.webike.net/sd/23176446/)
View detail
Recommended
It is lightweight and has some strength.
The part that hangs over the body of the car is rubberized to prevent scratching. It is easy to use and recommended.
View detail
Lightweight Ladder for Off-road motorcycles
Light weight compared to other all-Gold Ladders.
I live in an Apartment and usually keep it in my room, so it's easy to get it out because it's so light.
Lamp part is Material:I am concerned about the long term durability because of the Plastic, but I have used it for about a year and have not had any problems.
The width is a little narrow, so you have to be a little careful when loading it.
I think it is a good product for light weight off-road motorcycle.
However, if you can leave the Ladder in your car and store it right next to a parking lot, you can
Shouldn't it be made of all Gold genus? I think so.
View detail
Very good and easy to carry.
I thought it was very light and easy to carry.
The ease of use and strength of the product is perfect.
It's made by DRC, so you can feel safe.
View detail
It's nice to be light.
It is not load-bearing because it is for Off-roadMachine, but the material:I like that it's Plastic, so it's very light.
I also like the fact that it looks a little more stylish than steel.
As expected of a DRC product.
View detail
Lightness is justice
Light and Compact!
It's a Transporter in a light 1box, but it's still in the Trunk Type of Motorcycle (Super CUB to Off-roadSpec.) The load-bearing capacity is no problem "Shita" I don't care about such things as
View detail
A light off car is enough
Purchased a DT200WR to load on HIJET cargo Loaded and unloaded about 3 times after purchase
There is no particular problem of distortion It is lighter than the usual AluminumLadder and looks better
The Ladder was fixed to the body of the vehicle with the Belt to make sure it was loaded, but the tongue part was too long
It seems to work fine just to put it on
It may be unavoidable due to its structure, but it does not become a straight line at the time of maximum extension
delicately "" I'm worried about the fact that the joint is not combined with Exactly
It's also not ideal for carrying heavy motorcycles due to its narrow width
If you only carry a light Off car, then Recommendation
View detail
Folded to save space
Originally I used Astro's Arch Type, but in Transporter, the location I made this product to take the
As I had planned, it is space-saving, which makes it easier to load
By the way, it's an '18 R1 that's on the edge of set weight, but so far it's working fine
It's a backlash, but it's not an arch shape, so it can be used for motorcycles with low ride height or under The vehicle with Cowl may be sidelined
View detail
I love how light this thing is!
It's something I use in and out of the car, so I'm very grateful for this light weight
Off Car (About 140 pounds.) I have used it in my car and the strength is fine Is the price a little high? If it was a little cheaper, I would have no complaints (^o^;)
View detail
Regardless of the product, there is a problem with webike correspondence
Impre that I contributed before was unilaterally deleted in webike, so I will post again.
Although there is no problem in the product itself, since we corresponded a little to the correspondence of the product and webike sent to us to the various unpleasant eyes, I will post the circumstances.
- Like the attached picture packed old newspaper is stuffed up and the box is also tattered, a substitute like the second-hand goods bidding on Yahoo auction arrived.
- Because it only looked second-hand goods, we got Objection attached and exchanged, but the replacement items were completely different packaging which is not used such as old newspaper.
- Invoice for replacement "I bundled items of apology" It was written, but nothing was entered www
- I asked why I became a product in a state like the one that was sent first, but sometimes I use newspaper for packing materials, it is not returned from other User etc. etc. I got a response. (I've been using webike for over ten years, but it is the first time I saw that newspaper was used for packaging)
By the way, the impression you wrote before attaching Objection is erased unilaterally and you get an error if you try to access it. I asked you to go back and I got a reply from webike that I returned it to the open state, but I still have an Access error and will not appear in the list of impressions.
View detail
Second-hand goods arrived even though I bought a new one
When opening it while thinking that the outside Corrugated cardboard seems to be funny with brown normal gum Tape, the old newspaper was used as a cushioning material and the sand was attached to the Rubber foot of Ladder rail Well clearly Spec. There was evidence that it was done.
Anyway, I will contact Support for ...
View detail
This lightweight car can be used well with this
I am using my car Ducati or commuter Motorcycle when carrying it on the car. Usage frequency is low.
It will be enough if this is a light car with a weight of 150 kg. But there are some points to note so I'll write it later.
I cared Ducati MONSTER many times with this Ladder (VOXY) Posted on. It goes without saying that it is easier to use Ladder that is longer and wider and has a ladder section denser. To the last lightweight for Vehicle, in case of emergency Ducati MONSTER if it is about somehow.
As a precaution, because the total length is short, depending on the combination of car and Motorcycle, the bottom of Motorcycle will rub.
Because I was Limit safe in my case, please check firmly in a minute way.
View detail
This is MONKEY!
I bought it because it was cheap as I was just looking for something good for loading MONKEY in the car. Because it can be folded into a Compact, it is lightweight as well as a car. It seems durable unexpectedly so it seems to last long. View detail