Reviews
Lots of interference.
Purchased to prevent stains rather than to receive Oil.
Material:It is made of FRP and weighs 580g.
As is, there are no nests or hickeys, but there are many Small scratches and scuffs, so it is painted.
Lightly polished with #1000, sprayed with a buffing compound, and painted with 2-component urethane.
Cut because it interferes with Bracket and Hose near Side Stand, although it is not mentioned in other reviews.
Cut because it interferes with the IndonesiaFull Exhaust System that is being installed.
It was difficult because there were many parts to cut and a lot of cutting.
Prepare cutting and cutting tools for those who purchase them, as they are difficult to use with manual tools.
View detail
It's hard to install
Cowl was burnt due to interference with the lower part of the vehicle body.
Since it is installed inside the cowl, there is a limit to how much modification can be done, so we gave up on using it.
View detail
Used as Oil receiver for Circuit run
I installed it on my Ninja 250SL that I ride for Circuit Racing.
Since it is a dedicated product, it can be basically simply installed, but there may be some interference depending on the exhaust system being used.
I had OEM Exhaust System and YOSHIMURA Slip-on Silencer, but there was a little bit of shaving part.
View detail
Concerned about strength of some parts
FRP was selected because the parts are not so heavy even in resin, and weighed about 600g.
I thought it would not need much strength, but when I held it horizontally by the edge, it made a squeaking sound, so I think it would be better to use Carbon if you are concerned about it.
The hole where the cowl is tightened with the frame is slightly out of alignment and the shape does not follow the frame.
I used Chinese Link pipe and needed to cut the back end, so I cut it with Grinder for Hobby.
Sandwiching type on the inside so there is no risk of scratching the OEMCowl, and it looks like a racing machine, which is cool.
View detail
No dimensions.
Size does not match.
Instead of buying this, you should buy the Magical RacingUnder Cowl Tray.
View detail
Processing essential
Installed on zx10rr-2019 MODEL
It was unprocessed and could not be installed.
The position of the hole on the Left Side of the Gap interferes with the protrusion of the OEM Cowl and cannot be tightened by Bolt.
Improvements?
The Left Side (STAND side) hole must be extended.
Everything else was fine.
As a side note, I liked it shorter, so I cut about 5 cm from the back to install it.
View detail
Lower belly volume up
I was lonely around Under Cowl and the catalytic part under my belly is bare, so I bought it for protection purposes and I did.
I don't know if it will work for Aeroparts.
Material:Buy the FRP ones.
As for the item, it's supposed to be painted, so there are parts of the color that are peeling, and there are holes in the nest. It's a pretty good condition, and it's easy to deteriorate if you use it in its bare state, so it's not a good idea to use it as it is. Manufacturer does not recommend it either.
There was no problem in the accuracy of the installation of screw holes etc., but I was able to make Side Stand It interfered with the loading and unloading, but the Manufacturer also had a problem with the Exhaust If there was a part that interfered with the system, the customer should do the processing. I shaved a little bit because it's a thing.
I installed it once before painting and drove it, but it was able to be installed securely without any fear.
I'm sending it out for painting now and I'm looking forward to seeing the finished product.
View detail
The work itself is Large and satisfactory
I really like the build and the shape
There is only one thing that interferes with the OEM exhaust pipe You need to
View detail
As long as the result is good all is OK
Installed in 16 year model ZX-10R. Oil tray is an essential manner for Circuit driving.
Initially, in the product description "Adapted to OEMCowl" "OEMExhaust system may interfere" It was filled in.
Because I did not say that it was not adapted, I bought it and tried to install it on an OEMExhaust System car, it was impossible to install anything before processing, because the catalyst interfered.
For that reason, we interacted with Wei Big staff and asked to display on the car equipped with OEMExhaust System that it was impossible to install.
Because I had painted it, I can not return it, it is objectionable.
That's why I bought a Trickster Ikazuchi Racing Slip-on Silencer.
When we made it catalystless, we cut the interference site of Pipe and mounted it safely.
If it is not OEMExhaust System Hanger, Pipe may not interfere and it can be processed without machining.
I fix it with two backward Screws, but Size is too tiring and there is no play.
Because of that, I have a hard time installing Screw, but after closing Screw I feel a feeling of Fit.
At first I was angry with the indication of indication, but sometimes attached a catalyst to make it catalystless, and eventually it leads to Large shopping, but it got satisfactory results It was.
View detail
Fitting with SC Project
The under cowl inner tray was very easy to instal, just need to cut a bit in the exaust pipe area,the carbon finish looks very nice in the bike View detail
Fitting OK with AKRAPOVIC
There was no Fitting problem with AKRAPOVIC
I was lucky although I was preparing some processing for installation.
However, we use separately sold for Full Exhaust SystemExhaust Bracket
Because of that, there is a possibility that the angle has changed slightly.
Clearance of Cowl and Muffler pipe section is one index finger
Is not there Limit.
If you were considering installing AKRAPOVIC at the same time, please refer for your reference.
View detail
Attachment is easy. Only screw-thread fixation was used without using double-stick tape. Although exchanged for YOSHIMURA Muffler, hitting in part is slightly anxious.
Attachment is easy.
Only screw-thread fixation was used without using double-stick tape.
Although exchanged for
YOSHIMURA Muffler, hitting in part is slightly anxious.
View detail
The cheap product made from FRP was purchased. Although it was the dress-up purpose up, accuracy and reinforcement are satisfactory at all. Although a picture is still in the state before paint application, the effect given to appearance is beyond
The cheap product made from FRP was purchased.
Although it was the dress-up purpose up, accuracy and reinforcement are satisfactory at all.
Although a picture is still in the state before paint application, the effect given to appearance is beyond anticipation and it has satisfied it dramatically.
Probably, it will be unnecessary especially since fitting is good, although double-stick tape is attached to fixation.
View detail
The shortness of the pure undercowl was somehow disagreeable and purchased by appearance serious consideration. My parenthesis is good although I have painted and attached. Attachment is also satisfactory only by a screw-thread stop, although doub
The shortness of the pure undercowl was somehow disagreeable and purchased by appearance serious consideration.
My parenthesis is good although I have painted and attached.
Attachment is also satisfactory only by a screw-thread stop, although double-stick tape is enclosed.
The recommend of the appearance is carried out to those who want for a parenthesis to improve.
View detail