Reviews
Fits: HONDA MONKEY, HONDA GORILLA
Highly satisfactory!
From a certain company's thin Swing Arm until now.
Changed to GCraft.
First of all, it looks good!
The high price of this product is enough to give you a sense of ownership and satisfaction.
The installation requires a certain amount of skill since it is an undercarriage.
However, Special Tool is not required.
You can ride it, look at it, polish it, w
View detail
Fits: HONDA GORILLA, HONDA MONKEY
Now you can drink.
Anyway, Cool.
You can polish Motorcycle, look at it and have a drink.
The installation is routinely MONKEYRose and
Level is normal if you are a person who is doing Level.
Special Tool is also not required.
Well, I am satisfied visually.
View detail
GCraft Swing Arm Triple Square
As long as you have a Jack, you can easily replace it.
It has not been driven yet, so the effect is unknown.
I think we were able to reduce weight from OEM.
I hope it will last for a long time.
View detail
Merit is everywhere.
In addition to the appearance, the Merit is that the suspension movement is less likely to be disturbed due to its high precision, the chain alignment is less likely to go out of alignment, the weight is reduced, the rigidity is increased due to the structure, and the comfort and stability of the ride is improved by extending the swing arm.
The two options on the market that can be clearly Upgrading from OEMSwing Arm are G'craft or OVER.
The two are full of Merit in terms of both dress-up and practical use, except for the price.
View detail
+16 on my monkey baja
I mounted the +16 version on my tuning baja. Nice finish but I give 4 stars because of the higher price. I can't upload a picture but I can deliver them by mail, also for my other reviews WEBIKE View detail
Swing Arm to replace OVERSwing Arm!
What made you decide to buy?
This is a change from OVERSwing ArmStubby with /5cm Long. any complaints about OVER I didn't have any Why did they change it? Six months after I bought my new car, I switched to the Overswing Arm, and for about two and a half years, we went to many places together I went out and thanked the Overswing Arm for all they've done for me and the G-CraftSwing Arm I would like to experience many different rides as my future partner By the way, the OVERSwing Arm has been married to a new owner
How was your experience with it?
Rear shock (OHLINS) works well because the Swing Arm length is 6cm long I wonder if the principle of leverage (point of force, fulcrum, point of action), which we learned in science long ago, is in action? I wonder if the principle of leverage (force point, fulcrum, point of action), which I learned in science in the past, is in action? I think Moreover, the Bearing Specification of Option has been selected for the pivot part as well, and Swing Arm's Swing Arm, thanks to its Bearing and 6cm Long Specification The movement is also smoother On the other hand, the Demerit has a longer Swing Arm... After it stops raining, or when it stops raining Mud splatter from the back to the Helmet (Takekawa's Fender EliminatorSpec. It is) Also, if you STAND on it, it's more sloped than the OEM That's the fate of the Ronsui!
Was the installation difficult?
To install the Swing arm pivot part Bolt and the Rear suspensionBolt You can't use the Maintenance Stand because it has to be removed This work was done by lifting up the rear side of the car with the front brake still engaged Safe and stable until it ends up being lifted by Ratchet Type ropes to the carport culvert If you have the environment to lift the rear, I recommend it If you are not confident in the work, it's best to hire a PRO If you happen to knock the car over and damage the other parts, you will have to pay for the work I think it feels cheap
What is the point or hang of the installation?
Just don't panic! Just looking at the Swing Arm I asked for, I smirked, but imagining the image and how it ran after installation If you do...you will be more inclined to get the work done and run It is to take a deep breath and work surely before human error appears in a hurry Also, it is difficult to install the brake hose, but I installed it as shown in the picture I posted
Do you have any wishes or suggestions for the Manufacturer?
With the ability to ask for repair parts from Webike and G-CraftHomepage It's good to know that I don't have to worry about maintenance later on Just two wishes and improvements In Grom's case, three of the rear fender attachment points are bolted on. OEM The Overswing Arm has a positioning? The Bracket of the G-arm is installed except for the Mounting Bolt CraftSwing Arm has a positioning bolt There was no Bracket of the Fender, so when I installed the Fender and ran, I heard a rattling sound by vibration (At first, I did not understand where the sound was generated (At first, I did not understand where the sound originated.) As a correspondence of the sound, I put the thin Cushion material under the Fender, and the sound disappeared Also, as I mentioned before, I wished there was a fixed part to attach the brake hose
[Do you have any products to compare it to?
OVERSwing Arm
OVERSwing Arm had some good points, too! Both companies' products are a great example of corporate effort I would recommend both products
[Others]
I will include this as a reference FDriven used in the G-CraftSwing Arm 6cm Long that I purchased Sprocket, Rdriven Sprocket, Chain linkSpec
[F17T:Rear40T:DIDChain120LINK in use]
DIDChainHome has a chain link calculator, so you can look it up for yourself and See
View detail
Fits: HONDA GORILLA, HONDA MONKEY
it's beautiful
It is made with great care, not only in its appearance and shape, but also in its welding, etc It has a mirror finish, so the scenery is beautiful
The main pipe is as thick as three fingers from my index finger to my ring finger It's tough
The Swing Arm that I had installed before had the lower part of the arm cut off with the Chain, but this is I'm grateful for the Large change because the product has a Slider underneath as well
In the case of the 10Inch, the Long Side Stand may not be used when the suspension is stroked depending on its shape It may interfere with Stubby in the case of Wide because it hits at NORMAL width If you don't do something about it, it's likely to hit you
View detail
Mounting on GROM
First of all, 6 cm Long needs Chain's Length change Death!
115~117LINKDeath!
If you measure Brake hose you can even NORMAL Death!
But since it takes impossible to change it is better to change DEATH !!!!!!
Light weight and weight is obviously different from OEM!
It's not only weight
The rotation of the Tire is somewhat light
The movement of RShock is also light (With Bearing)
Afterwards satisfaction is Zuzzuzuuuuuuuun
And finally, OEMRear, Axle Shaft was demon Rust
Probably inside of Wheel would be Rust's nest
Is not it cracked in a little more? Rust was Southeast ASIA Quality
It took me a lot of hard time getting metaxso while pulling it out
I already took Hammer in a crushing thunder
View detail
Fits: HONDA APE 100, HONDA APE 50
[Webike Monitor] It is a Cool at highest. It is lightweight, there is no twist and it becomes easy to ride. It is a Triple square supposing it is wavering. 10-cm Long with a Stubby If it is not the Long which is a rule Triple square
[Webike Monitor] It is a Cool at
highest.
It is lightweight, there is no twist and it becomes easy to ride.
It is a Triple square supposing it is wavering. 10-cm Long with a Stubby If it is not the
Long which is a rule Triple square Stubby I think that it is not needed.
View detail
Fits: HONDA APE 100, HONDA APE 50
It was used for ape100. RIA was disk-ized, and he thought that he would run a circuit by a play grade suitably, and it attached. Dress-up nature up is very high. Only now, if there is no other mist since it becomes lonely, it is uncool on the
It was used for ape100.
RIA was disk-ized, and he thought that he would run a circuit by a play grade suitably, and it attached.
Dress-up nature up is very high.
Only now, if there is no other mist since it becomes lonely, it is uncool on the contrary.
Although attachment was an easy, since it was not able to put in a pure wheel as it was, the wheel was also summarized and it was put in.
although I think that it is merit that-izing can be carried out [ disk ], a price is odd when all are done -- it is -- it is .
.
.
.
Moreover, rigidity is not necessarily high and does not necessarily go up travel performance, either.
.
.
.
It is delicate.
View detail