Adjustment

I personally like this Mirror design because it is easy to match with the car body.
This is the first time I have tried to use TurnerSpec. but the adjustment is Large strange. when I try to adjust the Lens, the Turner part is pushed and turns before the Lens part.
I understand that it is natural in terms of functionality.
If the car is to be gapped on the road, we are looking at OEM diversion. View detail

XSR155 installation

Installed on XSR155.
Set Back Spacer and HURRICANEBMConti2 type Handlebar and Tanax NapoleonMirrorStingray are installed.
Mirror protrudes considerably from the handlebar when the photo is fixed.
If you are going to slip through, Offset45 might be a better choice?

Mirror、Adapter (Opposite Thread Screw) Offset, all to Plating.
If Adapter had been Black, Offset would have been Black.
Adapter→Holder→MirrorIt may be a bit tedious if everything is plating.

However, I don't think it would be a bad idea to have everything in Plating. View detail

OEM-like peace of mind.

In the case of my vehicle, the NORMAL mirror is an old Square Mirror, so the area that can be seen is a little narrower, but it can be used without any problem within the range of practical use and familiarity. The horizontal length of the mirror allows you to see a wider area than with the classic Round Type Mirror.
The width between the mirrors is narrower than OEM, so the arms appear a little larger, but this can be managed by adjusting the angle.

It has a mechanism called "Turner" at the base of the base that moves 45 degrees to release the force when it falls down, which is not the purpose of the design, but I use it when I place it in a narrow space. I have been using it for quite a long time and there is no particular loosening or rattling.

The quality of the plating is good and does not look cheap at all. Also, when it rains, I wipe it off before storing it in Cover, and there is no rust at all, including the scratched part as shown in the photo.

The other brand product has an image that is susceptible to rust, but it can be used in the same way as the OEM product, and after about six months or a year, when it starts to get a little dirty, you can use PIKALetc. gold polish to restore the polished look.

Ease of positioning is not good.
The adjustment is fine, but it is a bit time-consuming since it needs to be tightened here and there with the Spanner. Once it is set, however, it is not a problem because it is not so easy to change.

The mirror surface itself is a very ordinary Type. for some reason, there is no anti-glare mirror Type in the Lineup that does not glare the Headlight in this shape, so I would like to buy a new one if they offer it. View detail

The more plating parts you add, the brighter the body will look!

The look and feel is good even though I am new to Motorcycle.
The more plating parts, the brighter the car body.
Coupled with the fact that I'm replacing the Handlebar with a HURRICANE BMConti2 type Silver, it looks so cool! View detail

Stingray

I installed it on my ZrX1200 DAEG.
The quality of the plating is not so bad, and the mirror body is large enough for Japanese Vehicle Inspection Correspondence, so you can see the rear of the car without any problem. The rear of the vehicle can be seen without any problem because the mirror body is large with Japanese Vehicle Inspection Correspondence.
It is also lighter than Steel or Stainless Steel because the surface other than the mirror surface of the Mirror body is Plastic Plating.
However, I was disappointed that there were a few gaps on the edge surfaces of the mirrored surfaces.
Now I'm hoping for durability. View detail

Looking good! We're almost there for rearward vision!

Mirror finish for a great look.
Easy to install.
Turner is useful. The rear view would be easier to see if the Bracket length was longer and the angle was higher!
Overall, satisfied including the price! View detail

I was going to put it on another Motorcycle, but …

I've tried to be creative I couldn't get a good rear view So we have to hurry MONKEY 125 I attached it to the
It looked good on the test run, but I'm going to have to wait and see if I can get a rearward view that I'm personally comfortable with We are planning to set up
Design MONKEY 125 I wasn't sure if it would match to the Can we do this? Personally, I'm not sure how I feel about it (Laughs) View detail

Visibility wasn't as widespread as I'd hoped

Installed on 2014xvs950ct
OEMMirror Quantity:Pair (for Left and Right) I bought this one because I felt the visibility of
Installation, etc...no problem at all
I actually drove it and it did not increase my visibility
I installed an adapter and it went up to the top, so my view of it has changed a bit or so
The product has been a bit of a disappointment to me

But as a Mirror, I think it's more than enough to be effective
View detail

It is surprisingly easy to see.

I do not want to destroy the image of NORMAL, but I thought that the car body should be made Small, I thought that I purchased a similar shape to OEM Product. Compared with OEM Product, Bracket became shorter, it became somewhat difficult to see, but it was not enough to say that it was inconvenient. Regarding the blur, I tried cruising and cruising the expressway just before the Red zone at the 1st speed, but with the slight vibration that License Plate letters can not be read, there was no problem here. For people who are suffering from the large body of the car body is an item of recommendation. View detail

Safety up ↑

It's fluffy Napoleon OnMirror.

It's all different from cheap

The rear vision spreads and the lane change becomes safe!

The blind spot is very few compared to OEM. View detail

It replaced from the small lightweight external Mirror. Result in which it is comparatively [ legible ] stylish and texture is also satisfying.Since it conforms also to new standard, we can recommend you.

It replaced from the small lightweight external Mirror.
Result in which it is comparatively [ legible ] stylish and texture is also satisfying.Since it conforms also to
new standard, we can recommend you. View detail

It purchased, after examining which it checks at a blog, a shop front, etc. and matches most before PCX125esp was delivered. Although it returned to the house after delivery of cars and being exchanged immediately, visibility also up(ed) height & width b

It purchased, after examining which it checks at a blog, a shop front, etc. and matches most before PCX125esp was delivered. Although it returned to the house after delivery of cars and being exchanged immediately, visibility also up(ed) height & width by just right touch from the NORMAL. The place which does not contact a GIVI Screen even if it turns a wheel to the limit is good!.
It is touch with markedly more sufficient appearance than the black Mirror of a NORMAL with a result of a Plating sufficient [ especially ]. There is also no blur of the Mirror under run and it is satisfied with the highest. View detail

Since the pure Mirror of PCX was ill-shaped somehow, they were exchanged. -- pure -- the part whose height was lost more -- it is felt legible. The visibility of back also went up.

Since the pure Mirror of PCX was ill-shaped somehow, they were exchanged.
-- pure -- the part whose height was lost more -- it is felt legible. The visibility of
back also went up. View detail

[webike Monitor] The Mirror was also custom-made ? Made the Oval and satisfied with it from the square shape, of the Mirror.

[webike Monitor] The Mirror was also custom-made ? Made the Oval and satisfied with it from the
square shape, of the Mirror. View detail

[Webike Monitor] The APE 100 was attached and used. Back can be seen firmly, without blurring also during the run, and it is safe. appearance is also beautiful and has a high grade feeling. The conversion Adapters to 10 mm is required to at

[Webike Monitor] The
APE 100 was attached and used. Back can be seen firmly, without blurring also during the
run, and it is safe.
appearance is also beautiful and has a high grade feeling. The conversion Adapters to 10 mm is required to attach to the
APE. View detail

He wanted to change feeling just for a moment, and it exchanged. Although the Plating type was chosen, a Design is also liking and the texture of a Plating for a product made of resin is also high.

He wanted to change feeling just for a moment, and it exchanged. Although the Plating type was chosen, a Design is also liking and the texture of a Plating for a product made of resin is also high. View detail

In using this product by YAMAHA, the Adapters for changing into a reverse Screw from a right Screw is needed. Since I did not know this, I was puzzled. There is a high grade feeling from the pure Mirror attached from the first, and user-friend

In using this product by YAMAHA, the Adapters for changing into a reverse Screw from a right Screw is needed.
Since I did not know this, I was puzzled.
There is a high grade feeling from the pure Mirror attached from the first, and user-friendliness often feels.
When it became brave about adjustment of a portion like a Bolt once, it did not have a problem, but the adjustment using a portion like a Bolt was difficult for me with the first awkward setting out. View detail

It stood and exchanged mirrors on the occasion of GOKE. Although the kana in which stay is slightly brief and becomes decoration was thought, such a thing could not be found, there is form width of a specular surface and rearward visibility became bet

It stood and exchanged mirrors on the occasion of GOKE.
Although the kana in which stay is slightly brief and becomes decoration was thought, such a thing could not be found, there is form width of a specular surface and rearward visibility became better than the pure time.
There is also a high grade feeling and it has satisfied it. View detail

He wanted to exchange for a round mirror and it was searching. Although the somewhat large kana ? was thought and being purchased, it was not as it, either and was exactly. The high grade feeling is and is satisfied rather than the pure square-sha

He wanted to exchange for a round mirror and it was searching.
Although the somewhat large kana ? was thought and being purchased, it was not as it, either and was exactly.
The high grade feeling is and is satisfied rather than the pure square-shaped mirror.
A field of view is not so much different from a pure square-shaped mirror, either, and it does not worry it. View detail