Reviews
As expected of MRA.
As expected from MRA, which is also used in MotoGP, the precision is perfect. It took a little bit of effort to re-fit the rubber, but even a beginner should have no problem installing it. View detail
This is the kind of Screen
I personally did not like the design of MT-07 after most of the screens were installed, probably due to the mounting position of the Light, but with NAKED, it is like a battle against wind speed at high speeds, so I had no choice.
Since we wanted to avoid a large, prominent Screen, we chose a Type with a transparent top.
Middle type in terms of size (Small Type?) Although it cannot be said to be strongly effective, it seems to have slightly reduced wind pressure hitting from the chest down at high speeds of 80 km or more, but a larger type would be better if the wind protection effect is to be enjoyed at the largest possible size.
As for the installation, I think it is easy and even girls who are not good with Machines can do it.
Since the meter is in the front of the car, there is space for a pair of shoes between the meter and the screen, which is convenient for placing gloves or other items.
You could say it's a waste of Space, but … sweat.
View detail
Satisfaction is satisfaction, but
I had a hard time fitting it because the holes were out of alignment, perhaps due to individual differences.
I bought it because I thought Gradation was a good Accent!
View detail
Replaced from ZeroGra.
Installation is easy, even the well nut goes in easily if you are careful. No modification was required. However, it would be better to screw the tip of the nut to the cowl so that the gap between the nut and the cowl is small. The product is simply good and looks thicker and sturdier than the ZeroGlasses. Instead of that, the visibility [Color] The ZeroGlass cracked quite easily when impacted by a fall. I like the look and functionality of the ZeroGlass, but this time I decided to use the ZeroGlass! The fit with Cowl is not perfect, but I am satisfied with it. The wind protection effect is also naturally better than that of the NORMAL. I am glad to have bought this product. View detail
Be careful in case of rain.
Raindrops roll in around the Meter at speeds exceeding 150 km/h (mystery)...
However, when a crosswind came, the handlebar had been taken away, but this was not the case this time.
View detail
Functional beauty without being too assertive
When it comes to Screen replacement, nothing but MRA is an option!
The height and slightly extended length of the OEM forme are not compromised, so the wind protection effect can be felt not only at high speeds but also in the city.
The high precision of the installation meant that there was no need to adjust the screw holes, and there were no noticeable gaps or lifts.
Some of the worst products on the market are made of resin so uneven that the view through the screen appears distorted, but this manufacturer's products look normal and normal is the biggest thing.
I personally like the lower 1/3 painted BLACK!
View detail
Fits: KAWASAKI Ninja250R (NINJA2 Helmet50RR), KAWASAKI Ninja250R
Whether it will be made ZEROGRAVITY and after wavering, it purchased here. It was finished in quite racy touch and is very much satisfied. About air resistance, if it becomes inclined attitudes at the time of high speed operation, he will have a f
Whether it will be made ZEROGRAVITY and after wavering, it purchased here.
It was finished in quite racy touch and is very much satisfied.
About air resistance, if it becomes inclined attitudes at the time of high speed operation, he will have a feeling which becomes very easy.
However, the ZEROGRAVITY may be better if it cares about air resistance.
As above-mentioned, since I am suitable serious consideration, I am satisfied.
View detail
Fits: KAWASAKI Ninja250R (NINJA2 Helmet50RR), KAWASAKI Ninja250R
It is the introduction of an external screen and great desire worried from before. Although the original-shaped color screen was originally due to be purchased, it was not able to order by the manufacturer's missing item delivery date undecidedness un
It is the introduction of an external screen and great desire worried from before.
Although the original-shaped color screen was originally due to be purchased, it was not able to order by the manufacturer's missing item delivery date undecidedness unluckily.
Satisfaction can seldom be acquired in the place exchanged for the screen which does not become better for the change in original form.
Racing form was chosen by if it becomes.
Moreover, everybody chooses not the smoke attached wholly but a clear.
The thought people are seldom using what is more strong than permeability is good.
Attachment is very easy.
What is necessary is to remove four bolts which are fixing the screen, to draw out a screen, to insert this product and just to fix with a bolt, after attaching and changing a well nut.
Although he heard that it cannot be made depending on a model, in the 2010 type, it was possible.
However, although it thinks that there is individual specificity, the bolt hole of the screen purchased this time has shifted for a while, and it is making the cowl strain oneself somewhat.
The goods themselves are still the penetrable and foppish gradation which was very wonderful and excellent, and firm structure.
Furthermore, the kind package which it is standard and attaches to the screen mole.
Although it is a traveling surface to worry, so much change is not felt at an inside low speed.
When it turned down at speed in nearly 70 K, the same windscreen nature was able to be obtained in the location higher than the pure time.
However, it is also a feeling grade.
What does not still need to be fast turned down on a tank is easy.
moreover, honest, although it is the permeability over a screen -- in such height, since there was nothing, it hardly worried seeing the front through a screen etc.
At the time of high speed operation, but, where the body is started, it did not think so much that a difference was pure too, but when it lay down for a while, the world changed.
If the windscreen region of a screen is stepped on at speed that the wind noise is playing the good match to the exhaust sound, a wind will change to a breeze.
The inside of a helmet is suddenly attacked by the wonderful feeling wrapped calm.
(But an exhaust sound and an engine sound are active services!) It seems that the screen of this form demonstrates real value too just in a high speed area.
Although a fundamental running pattern also feels that a function can seldom be exhibited in the latest use that is to enjoy a peak and winding, in the long touring performed occasionally, it is likely to become strong allies, such as fatigue mitigation.
View detail
After wavering with the zero gravity, it carried out here. the ease also of being also qualitative -- it was good that it was right [ that ] (self-delusion) and with [ corresponding to an automobile inspection ] the marginal rubber. 3 mm in thickn
After wavering with the zero gravity, it carried out here.
the ease also of being also qualitative -- it was good that it was right [ that ] (self-delusion) and with [ corresponding to an automobile inspection ] the marginal rubber.
3 mm in thickness is strong and it is actually good.
About attachment, it was easy.
However, if compared pure, there is a gap a little.
I think that it is a level to worry.
Although a smoked type order was placed this time, since the bottom 1/3 is dark smoke, the inside of a cowl cannot be easy to be seen.
If the hole (air duct ?) is merely open in this dark smoke subordinate part and rain, garbage, etc. enter Is it meaningful although he thinks that it does not enter privately?.
I think that something will close.
To the actual run, it became quite easy by ICHIMARUMARU kg~ICHIROKUROKU kg on the highway as which the protection-against-wind effect is not felt especially in running a public road with legal speed at the time of a run (various any more, since I was fearful, it was not able to take out).
However, it was worrisome that he gets the jitters and sound can be heard with BIBIBIBIBIBI.
If it gets used, there seems to be no problem.
Appearance also becomes smart synthetically and I think whether to be the better one since the physical feeling at the time of high speed operation was also made.
(I would like to have come to compare with ZEROGURA)
View detail
In exchange for normal, hole locations are completely problem nothing and good. There is also no distortion of a screen (I chose smoke), and a field of view is also good. It has been improved, so that it did not become as compared with normal, alt
In exchange for normal, hole locations are completely problem nothing and good.
There is also no distortion of a screen (I chose smoke), and a field of view is also good.
It has been improved, so that it did not become as compared with normal, although it was the protection in the important high speed area.
Merely.
.
.
the hole currently opened from the beginning to the screen -- since this hole comes to the back side where this is treacherous and which is a meter exactly, at the time of a /rainy weather run, water invades at the time of a car wash.
Since a parenthesis was not so very well, either, I buried by the mesh seat.
View detail
Exactly
The included parts were easy to understand and the installation was completed easily.
The instruction manual is in German, but you can find it in the illustration.
View detail
Fits: DUCATI 899Panigale, DUCATI 1199Panigale S/Tricolore, DUCATI 1199Panigale
The Screen looks distorted.
When you open the Package
The screen is distorted like a mirage, what the heck!
It looked distorted and made me feel sick.
I've been trying to call you, but I can't get through...
I can't return it, and I don't want the same person to come back next time, do I?
View detail
Wow that's cool
Installed on a GSX-R1000R 2019
Every vehicle in my history has chosen MRA for Screen replacement.
I chose the Clear type and it is as transparent and accurate as I expected.
Not only does it increase the Screen height and improve wind protection, but it is rather more Race ish than OEM in terms of Forme.
It also comes with a braid to cover the edge of the edge.
The only drawbacks I can think of are that this braid will yellow over time and the clip that holds the braid in place will rust.
However, since the body does not deteriorate particularly, I can procure only the molding and replace it appropriately.
When installing, it is important to note that the Screen on the R1000R is held in place by a T10Torx bolt.
It's the first Size I don't have unless I buy them individually.
Also, the Screen has 6 bolts, but the length is not one type, so you need to be careful here too.
Also, the quantity on the front side of the car body:I think you will have difficulty installing the 2pc.
It seems like a sure thing to remove Upper Cowl, but Quantity:Pair (for Left and Right) If the Mirror is removed, the Cowl will be able to move somewhat, and if it floats in this state, it is possible to slide the Well nut in without removing the Upper Cowl.
So, the thing is a product that can do a solid Recommendation.
It is safe to leave it to the shop if you are not confident because it may be difficult to install it structurally.
View detail
Design is very good
Buy it because of the design
As far as wind protection goes, it's a lot more promising than OEM.
Minus only a few effective points
I personally like the Sticker that comes with it.
View detail
The windproof effect is moderate, but Visual is good.
The Screen is moderately high and not as windproof as the Puch Touring screen. But the Visual is good.
I like the fact that the Screen extends right above the Mirror Bracket.
View detail
Parenthesis OK
Buy with Y's GearScreen→MRA.
DesignIt's good and powerful.
View detail
It took a while, but I'm satisfied.
After 22 years, the OEMScreen became brittle with age and cracked just by catching the Motorcycle Cover, so I bought it for replacement.
In addition to the body, it comes with Rubber molds and Stickers for the Edge. There is no protective film on the body and there are some scratches. It will be scratched sooner or later, so I'll just ignore it.
It seemed that there was no stock in the FOR JAPAN MODEL, and it took more than two months to arrive. Because it is not a very MAJOR car model, it is unavoidable, but it is not possible that the delivery date had become 2 or 3 weeks in the purchase page.
The thickness of the body is a little thinner than OEM and the center part is bubble shaped. The center part is about 3cm upward in bubble shape, and both SIDEs are spread out about 2cm to the front side, and the area increases, and the windproof effect can be expected.
Although the installation accuracy is still not as good as OEM, I was able to install it without any problems in about 30 minutes.
I didn't like the design where the front side was raised as if it was for touring, so I am satisfied with this Screen including the design.
View detail
MRA competitive windshield
My car is Damao Honda's CBR1000RR, and I bought this MRA elevated competitive windshield on Webike. The material of this product is acrylic. The color of this windshield is gradient and heightened. On windy riding roads, we can ride behind the windshield, which can better block the direct wind. I will also recommend Wibaike platform to other friends, hoping that Wibaike products will be more and more, and the prices will be more and more favorable. ---------------------------------------------- My car is a big trade Honda CBR1000RR, I bought this MRA windshield increased competitive in Webike. This product material is acrylic, this color gradient windshield, and heightening, windy road riding, we can lie on the windshield ride, better barrier wind blowing straight. I will recommend Viagra 100 passengers platform with other Friends of Mount hope Granville 100 passengers more and more goods, more and more price concessions. Powered by Google Translator View detail
mra wind screen
Delivery is fast,It much higher than the original,but it have a gap in front. little wind will Pass through the gap. good quality View detail
Japanese Vehicle Inspection Correspondence also hides MeterWiring.
It was the right choice to choose this one that hides the Japanese Vehicle Inspection Correspondence and MeterWiring in the Screen of Other Brand Product.
Moreover, the price is reasonable and the rectification effect goes up considerably compared to the original shape.
Both circuits and public roads are great looking and less fatiguing!
View detail