Reviews
It's not very plain, but I always replace it.
Purchased this one because it is slightly cheaper than OEM. I don't think there is much of a problem. I know many people reuse them because they tighten so tightly, but considering the significance of Gasket being used there, I think they need to be airtight. So I'm not being stingy and replacing it. I want to change the OEM with an external Exhaust System, which for some reason comes” regularly! I change them when I'm in the mood to”change them. View detail
Fits: SUZUKI GSX1400, SUZUKI GSX-S1000F, SUZUKI GSX-S1000, SUZUKI GSR400, KAWASAKI NINJA1000 (Z1000SX), KAWASAKI ZX-6RR, KAWASAKI ZX-6R, KAWASAKI Z1000 (water-cooled)
If only it were a little cheaper…
I am purchasing this because I need it to replace the Slip-on Silencer.
The quality is fine and it prevents exhaust leaks well, but it is a consumable item and I would like it to be a little less expensive.
View detail
Fits: YAMAHA GRAND MAJESTY400, YAMAHA TT250R RAID, YAMAHA TT250R
Used for WR155
[How is it used?
I used it to replace the YOSHIMURAExhaust System on my WR155.
How was your experience with it?
It is usable without leaks of exhaust Gas.
How did it compare to other products?
I have never used KITACO and OEM, but KITACO quality is close to OEM quality.
[Points to note]
If not tightened firmly, it will leak.
Other items that would be helpful
Whether there are Included Parts:/ Items that should be purchased together/Opinions and requests to the Manufacturer
nothing special
View detail
OEM Parts same as above.
Used to replace the Exhaust System on a 2001 D Tracker with an external Slip-on Silencer.
OEM Parts No. 11061-1055
For late D Tracker and KLX.
The size of the Gasket is different from the previous year's Gasket, so you should check carefully when placing an order.
I was able to install it on Beauty by installing it on the Slip-on Silencer side and then inserting it into the exhaust pipe.
View detail
Tightly made
At first I thought it was defective because it was too tight, but when I pushed it in slowly and carefully, paying attention to the angle of the frame, it went in like a hammer. It may be a bit expensive, but every time I replace the Slip-on Silencer, I replace this one as well. View detail
No problem for OEM exhaust pipe installation Size
[How is it used?
Replaced during installation on an XJR400R Slip-on Silencer.
I chose this KITACO product because it is a consumable and the OEM price was too high.
How was your experience with it?
The Size on the Exhaust pipe side is Exactly, which is fine for conformity.
However, the WR's Slip-on Silencer that I replaced did not require a joint gasket, so I ended up keeping the size only as a result.
Well, if I ever change the Exhaust System, I will have a chance to use it, so I will let it sleep in the warehouse.
How did it compare to other products?
Less expensive compared to OEMs.
I don't think there are any problems with the Size and quality aspects.
[Points to note]
Check in advance whether your Silencer requires it!
【Review】
The price is lower than OEM and there are no quality issues.
It is a consumable item and should be replaced periodically, but some Silencers are unnecessary, so check if you need to use them before purchase.
View detail
Fits: HONDA X4, HONDA VFR800F, HONDA VFR800, HONDA CBR600RR, HONDA CBR600F, HONDA CBR600F, HONDA CBR1000F, HONDA CB1300SUPER BOLDOR, HONDA CB1300SUPER BOLDOR, HONDA CB1300 SF, HONDA CB1300 SF
There's no doubt about it.
I bought this to replace my Slip-on Silencer and there are no exhaust leaks, no doubt about it. View detail
Fits: SUZUKI 250SB, KAWASAKI KLX250, KAWASAKI KLX250, KAWASAKI D-TRACKER-X, KAWASAKI D Tracker
Don't be stingy, get a new one.
Required Replacement Items when purchasing and replacing Slip-on Silencer.
In most cases, the joint gasket that connects the silencer part to the exhaust pipe part will stick when heated and cannot be removed. The gasket itself will break if you try to remove it forcibly.
Therefore, I have chosen to purchase KITACO's Joint gasket from the beginning, because the lineup is abundant and the compatibility list is well organized, so you can purchase a Joint gasket that fits most sizes of Japanese motorcycles.
https://www.kitaco.co.jp/data/product/link/muffler_gasket/muffler_joint_gasket.html
The price is low, so don't be stingy and buy new.
View detail
Fits: SUZUKI ST250, YAMAHA YZF-R3, YAMAHA BRONCO, YAMAHA XG250 TRICKER, YAMAHA XG250 TRICKER, YAMAHA SEROW225 W, YAMAHA SEROW225 W, YAMAHA SEROW225 W, YAMAHA SEROW225, YAMAHA SEROW225, YAMAHA SEROW225, YAMAHA SEROW225, YAMAHA SEROW250, YAMAHA SEROW250, YAMAHA SEROW250, YAMAHA YZF-R3, YAMAHA TW225E, YAMAHA TW200E, YAMAHA TW200, SUZUKI GRASS TRACKER Big Boy
Fits perfectly in yzf-r25
[How is it used?
Purchased to eliminate the gap between the middle pipe and exhaust pipe in order to install a Slip-on Silencer.
How was your experience with it?
Exhaust pipe and Gasket are perfectly sized.
However, the inside diameter of the middle pipe was 1mm smaller, so it was necessary to file the gasket. (Gasket is not bad).
How did it compare to other products?
I think other Manufacturers sell them at a much higher price, but KITACO products are sufficient.
[Points to note]
When using for yzf-r25, please make sure to check the inside diameter of the intermediate Pipe before purchasing.
View detail
Fits: SUZUKI ST250, YAMAHA YZF-R3, YAMAHA BRONCO, YAMAHA XG250 TRICKER, YAMAHA XG250 TRICKER, YAMAHA SEROW225 W, YAMAHA SEROW225 W, YAMAHA SEROW225 W, YAMAHA SEROW225, YAMAHA SEROW225, YAMAHA SEROW225, YAMAHA SEROW225, YAMAHA SEROW250, YAMAHA SEROW250, YAMAHA SEROW250, YAMAHA YZF-R3, YAMAHA TW225E, YAMAHA TW200E, YAMAHA TW200, SUZUKI GRASS TRACKER Big Boy
Even if it's not OEM.
The quality is good enough even if it is not OEM View detail
Fits: SUZUKI GSX1400, SUZUKI GSX-S1000F, SUZUKI GSX-S1000, SUZUKI GSR400, KAWASAKI NINJA1000 (Z1000SX), KAWASAKI ZX-6RR, KAWASAKI ZX-6R, KAWASAKI Z1000 (water-cooled), KAWASAKI Z1000 (water-cooled), KAWASAKI Z1000 (water-cooled)
Compatible with SEA BASS cars?
When I bought a SCProject Slip-on Silencer from Webig, I searched for Gasket as well.
Motorcycle is GSXS1000 (22) It is
Search by Car Type Also, this product was a hit on the Slip-on Silencer's product page. Gasket is here. Tap it and you'll get a hit on this product. 。
However, the product is actually not usable when replacing Slip-on Silencer.
Because it is for the exhaust pipe assembly (before the catalyzer), the size does not fit.
Slip-on Silencer can help you After Catalyzer." You have to look for it in the "Search by car type" section, but it doesn't show up in the search by car type!
The piping size of the Silencer section of the GSXS1000 is
On the Catalyzer side Φ49
It is Φ54 on the OEMSilencer side.
So, I believe the model number is JPS4. For the Silencer part of the GSX1300R HAYABUSA. fits.
speaking one's mind Search for WeBig products by model. is full of holes and governed by a governor.
Gasket, which recommends when purchasing Slip-on Silencer, recommends non-conforming products that cannot be used.
View detail
Fits: SUZUKI ST250, YAMAHA YZF-R3, YAMAHA BRONCO, YAMAHA XG250 TRICKER, YAMAHA XG250 TRICKER, YAMAHA SEROW225 W, YAMAHA SEROW225 W, YAMAHA SEROW225 W, YAMAHA SEROW225, YAMAHA SEROW225, YAMAHA SEROW225, YAMAHA SEROW225, YAMAHA SEROW250, YAMAHA SEROW250, YAMAHA SEROW250, YAMAHA YZF-R3, YAMAHA TW225E, YAMAHA TW200E, YAMAHA TW200, SUZUKI GRASS TRACKER Big Boy
As expected, don't be stingy and be sure to change it!
It is not an expensive part, so don't be stingy and replace it. Leaking waste is not good for the Machine. I don't feel any problem at all. View detail
Fits: SUZUKI ST250, YAMAHA YZF-R3, YAMAHA BRONCO, YAMAHA XG250 TRICKER, YAMAHA XG250 TRICKER, YAMAHA SEROW225 W, YAMAHA SEROW225 W, YAMAHA SEROW225 W, YAMAHA SEROW225, YAMAHA SEROW225, YAMAHA SEROW225, YAMAHA SEROW225, YAMAHA SEROW250, YAMAHA SEROW250, YAMAHA SEROW250, YAMAHA YZF-R3, YAMAHA TW225E, YAMAHA TW200E, YAMAHA TW200, SUZUKI GRASS TRACKER Big Boy
Value Product for motorcyclist
It's the same as the genuine product & it's so cheap. product quality is awesome I replaced the gasket with exhaust maintenance of TW200 . This is the gasket on the silencer side. It takes a little time to remove the old gasket, but you can rest assured that it is the perfect size and Kitaco brand.while you installing this exhaust gasket to the silencer make sure put anti-seize compound around exhaust gasket otherwise it will seize to the silencer & difficult to remove it.It can be used without exhaust leakage .HAPPY OVERALL.I'M GIVING 10/10 View detail
Fits: SUZUKI ST250, YAMAHA YZF-R3, YAMAHA BRONCO, YAMAHA XG250 TRICKER, YAMAHA XG250 TRICKER, YAMAHA SEROW225 W, YAMAHA SEROW225 W, YAMAHA SEROW225 W, YAMAHA SEROW225, YAMAHA SEROW225, YAMAHA SEROW225, YAMAHA SEROW225, YAMAHA SEROW250, YAMAHA SEROW250, YAMAHA SEROW250, YAMAHA YZF-R3, YAMAHA TW225E, YAMAHA TW200E, YAMAHA TW200, SUZUKI GRASS TRACKER Big Boy
Exhaust System、Gasket
I bought the Exhaust System for my XG250 TRICKER on a whim to change it back from db's to NORMAL. I thought that the quiet NORMAL would be nice once in a while. However, I will definitely want to replace it with db's again, so this time I bought Quantity:2pc. Set purchase. I think I can use it without changing it, but I don't feel good about it. I don't have any particular impression, but it gives me a sense of security of a new product. Don't be stingy and replace them. View detail
Fits: SUZUKI GSX1400, SUZUKI GSX-S1000F, SUZUKI GSX-S1000, SUZUKI GSR400, KAWASAKI NINJA1000 (Z1000SX), KAWASAKI ZX-6RR, KAWASAKI ZX-6R, KAWASAKI Z1000 (water-cooled), KAWASAKI Z1000 (water-cooled), KAWASAKI Z1000 (water-cooled)
Purchased in preparation for Exhaust System replacement
We will be replacing the Exhaust System on the NINJA1000 soon!
Naturally, I had to replace the Gasket, so I purchased it in preparation.
Since NINJA's exhaust system is a dual exhaust system, two Gaskets are required.
Gasket itself could have been anything, but I chose this one because it seems to be a standard product used by many people.
I can't wait to replace it.
View detail
Fits: KAWASAKI ZZR1400 (ZX-14), KAWASAKI ZX-9R, KAWASAKI ZX-6R, KAWASAKI ZX-10R, KAWASAKI ZX-10R, KAWASAKI ZrX1200ZrX1200 DAEG, KAWASAKI Z750S (water-cooled), KAWASAKI Z750 (water-cooled)
If it is a bit cheaper
I bought it because I needed it to return to Normal muffler for car inspection. I am satisfied with the Gasket which seems to be a good seal in a firm shape, but I think that it is good if it is a little cheaper because it is a thing which cannot be reused. View detail
Fits: KAWASAKI ZEPHYR1100 RS, KAWASAKI ZEPHYR1100, KAWASAKI D Tracker, KAWASAKI 250TR, KAWASAKI ESTRELLA CUSTOM, KAWASAKI ESTRELLARSCustom, KAWASAKI ESTRELLARS, KAWASAKI ESTRELLA, KAWASAKI KLX250SR, KAWASAKI KLX250R (for competition), KAWASAKI KLX250ES, KAWASAKI KLX250
Compared to DRC
Last time I used a DRC Gasket, but I felt it was more solidly made than the DRC. View detail
Fits: YAMAHA MAJESTY250(SG03J), YAMAHA MAJESTY250(4HC), YAMAHA MAJESTY250(4HC), YAMAHA MAJESTY250(4HC), YAMAHA MAJESTY250(4HC), YAMAHA MAJESTY250(4HC), YAMAHA MAJESTY250(4HC), YAMAHA DRAGSTAR400 CLASSIC, YAMAHA DRAGSTAR400 CLASSIC, YAMAHA DRAGSTAR400, YAMAHA DRAGSTAR400, YAMAHA DRAGSTAR400, YAMAHA DRAGSTAR400, YAMAHA MAJESTY250(SG03J), YAMAHA MAJESTY250(SG03J), YAMAHA MAJESTY250(SG03J), YAMAHA GRAND MAJESTY250, YAMAHA MAJESTY250(4HC), YAMAHA MAJESTY250(4HC), YAMAHA MAJESTY250(4HC)
Not conforming (?)
I used it as a silencer gasket for CRM250AR. It's not on the fitment chart, but the length and diameter of the Silencer and Chamber sides are Exactly the same, so I thought there would be no problem. I also used a liquid gasket. So far there is no exhaust leak. View detail
Fits: SUZUKI ST250, YAMAHA YZF-R3, YAMAHA BRONCO, YAMAHA XG250 TRICKER, YAMAHA XG250 TRICKER, YAMAHA SEROW225 W, YAMAHA SEROW225 W, YAMAHA SEROW225 W, YAMAHA SEROW225, YAMAHA SEROW225, YAMAHA SEROW225, YAMAHA SEROW225, YAMAHA SEROW250, YAMAHA SEROW250, YAMAHA SEROW250, YAMAHA YZF-R3, YAMAHA TW225E, YAMAHA TW200E, YAMAHA TW200, SUZUKI GRASS TRACKER Big Boy
no problem
Size, no disposal leak etc. No problem. View detail
Fits: SUZUKI ST250, YAMAHA YZF-R3, YAMAHA BRONCO, YAMAHA XG250 TRICKER, YAMAHA XG250 TRICKER, YAMAHA SEROW225 W, YAMAHA SEROW225 W, YAMAHA SEROW225 W, YAMAHA SEROW225, YAMAHA SEROW225, YAMAHA SEROW225, YAMAHA SEROW225, YAMAHA SEROW250, YAMAHA SEROW250, YAMAHA SEROW250, YAMAHA YZF-R3, YAMAHA TW225E, YAMAHA TW200E, YAMAHA TW200, SUZUKI GRASS TRACKER Big Boy
I want to have it for motorcycle maintenance.
KITACO KITACOExhaust System Joint Gasket (1pc.) caught my eye, so I bought it on impulse this time
I think the quality of the product is reasonable for the price range
It's safe to say that you won't be disappointed by the amount of gold you buy, which is Large
I bought the product and I don't feel like I'm losing money
As far as shopping goes, I felt like it wasn't a loss
It is a product worth the Gold amount
View detail