Reviews
antlion antlion Front slider
The least expensive product in Slider
Custom parts are gradually being discontinued.
I should probably buy it to protect Motorcycle.
View detail
Antlion front slider
Inner rod dia M6 was to small, M8 or M10 will defintely solid. As i already have front, rear and engine mount kit. "So cool in a set" View detail
Fits: YAMAHA WR250X, YAMAHA WR250R, YAMAHA WR250X, YAMAHA WR250R
Purchase at the same time as Rear slider
Installed to protect front fork and other parts in the event of a fall.
I think it is just the right size.
I don't know how effective it is because I think Handlebar will hit the ground first, depending on how it falls.
View detail
Fits: YAMAHA WR250X, YAMAHA WR250R, YAMAHA WR250X, YAMAHA WR250R
It attached to the sake in an emergency. It is more smart than having seldom become the obtrusive touch but having considered. Conversely, it is as moderate as it will become anxious, saying It is OK ? now if it says. I think that it is good i
It attached to the sake in an emergency.
It is more smart than having seldom become the obtrusive touch but having considered.
Conversely, it is as moderate as it will become anxious, saying It is OK ? now if it says.
I think that it is good in order to protect a brake rotor, a swing arm, etc. in case of emergency.
However, since the die length of a bolt is shorter, the following model wants a margin to bolt length to a slight degree.
View detail
Fits: YAMAHA WR250X, YAMAHA WR250R, YAMAHA WR250X, YAMAHA WR250R
It attached to the sake in an emergency. It is more smart than having seldom become the obtrusive touch but having considered. Conversely, it is as moderate as it will become anxious, saying It is OK ? now if it says. I think that it is good i
It attached to the sake in an emergency.
It is more smart than having seldom become the obtrusive touch but having considered.
Conversely, it is as moderate as it will become anxious, saying It is OK ? now if it says.
I think that it is good in order to protect a brake rotor, a front fork, etc. in case of emergency.
However, since the die length of a bolt is shorter, the following model wants a margin to bolt length to a slight degree.
View detail
Best Fit and Performance for the Lowest Price
With the Off-roadShop of the neighborhood, First Model Typedr-z400sm of the BALI thing was purchased at a very low price with the trade-in as it is.
I don't have the car in my possession yet because I'm still in the process of getting it inspected and delivered, but I go to the shop every time I have a day off to put on some custom parts and get in the way of my dad's work.
The Slider of antlion that is also being used in WR250X was put on by Front and Rear Set.
This is a good one, the price is very low, the shaft is decent, the quality of DURACON resin is good, and the size is moderate, so the protection range is perfect.
Springwith WasherBolt is a nice consideration.
View detail
Bolt On for some reason.
I heard that there is a case that you need to widen the bolt with a drill when you pass it through the hollow part of the Axle Shaft on the front, but in my case, it was large and strong.
However, there was a trick and mud was stuck inside for some reason. I removed the mud with 4-wheel windshield wiper rubber brackets, removed more mud with a guard wire, and washed with Parts cleaner.
The Steam washer only washes with water to protect the Bearing, and I'd like to see it avenged by not applying pressure, so I'd better watch out for clogged areas once in a while.
View detail
Fits: YAMAHA WR250X, YAMAHA WR250R, YAMAHA WR250X, YAMAHA WR250R
Outstanding accuracy and design for such a low price
I also installed this product on my wife's WR250X for Course. As it has already been installed on my 2007 WR250X, it is designed to be lightweight, simple in construction and less assertive in design, and when it falls, it can surely protect the Axle Nut and the main parts around the front. The Axle Nut is designed to protect the Axle Nut in the event of a fall, as well as the main parts around the front. View detail
as insurance
I think you should buy one if it will save you some money on repairs. The installation was Bolt On as well. View detail
antlion antlion Front slider
I was worried about it, but I bought another ManufacturerSlider because it was inexpensive and had many colors, but I had to process it by myself, and I failed to cut it! So I bought it at WeBike, and this is the loss of money of buying cheap things (reflection) (-_-;) However, there is too little color variation for the high price, and it is somewhat unsatisfactory for the emphasis on DesignParenthesis. View detail
Bling and protection at the same time
The antlion Front Slider looks good - and is easy to install too with few tools required. This is not a required product to install on your motard setup but if you want an extra peace of mind get one. This will save your forks from getting scratched and quite possibly, avoid damaging the axle on harder crashes. I just wish it is available in multiple colors. +Looks good +Price +Easy to install View detail
I'm happy with the loosening Washer.
I am using it on a 2007 wr250x. Because it was written that it was necessary to do the screw lock in other people's impressions, I was worried and inspected it to tighten it, but there is no looseness at all. As I thought, thanks to SpringWasher, I don't need to put extra torque and it is effective to stop loosening. View detail
After all, antlion is cheap and the most beautiful construction?
I put the Front Axle Slider on my 2007 wr250x.
Now you can align the front and back?
I also want an engine slider, but because I bought too many good things at Webig this month, my small allowance is a little tight, so now I am wearing the engine guard of wr250rOEM that I got from a local motorcycle shop.
Front Axle Slider is also Quantity:Pair (for Left and Right) Exclusive Design and no complaints. Please see photos for details.
You don't need our explanation. It's more than an argument?
View detail
Cospa best
Anyway, it's cheap! If you want to install Slider cheaply, choose this one Very easy to install
The Guard performance is unknown as it has not fallen over yet after installation
View detail
Slider
I don't want to be a part of it, but I bought it as a wand to keep me from falling
Anyway, it's hard to tighten the mounting nut! Other than that, it's a good product
View detail
Just in case and appearance
I installed it on my WR250X
Front for now...I'm considering whether Rear is from the same company or another company
You will need two socket wrenches of the same diameter for installation, even if they are not deep sockets Large Durable
The bar that goes through it is just size 'Huh? It didn't come out &hellip But it is installed with no problem
The key is to keep the Nut on the end
It's for when you have a spill, but I'll be careful not to take care of it
View detail
Ant Lion Front Sliders for WR250X
Sliders are nicely done with good size. Fit easily and accurately without any hassle. Installed them within 5 minutes. View detail
As insurance
I installed it as insurance to run Mini circuit.
In case of WR Front axle shaft goes out of Fork only on tightening Nut side, so Quantity : Pair (for Left and Right) It will be asymmetric.
There are only exclusive items and they are also considered properly, so when installing Quantity : Pair (for Left and Right) It will be a symmetrical appearance..
View detail
Although I am a little worried about strength, it may be useful for some time.
The shapes of Right and Left are different (I wanted the Instruction Manual on Kore)
Fit feeling was good, I felt it was necessary to specify Screw tightening Torque.
I wanted to have Stopper or use Screw of loosening type.
View detail
Can be fixed firmly
As it is an exclusive design item, it can be fixed firmly.
There is no looseness during running.
However, because there are also thin parts, it is an uneasiness point whether Body will not be damaged when it falls over.
View detail