Reviews
It is built with outstanding reliability.
It is made in Japan and has excellent stability.
The price is high, but it is better than using STAND, whose strength design is not well understood.
The L and V receptacles are sold separately, so you should use them for your own vehicle and application.
My vehicle is a KTM, so I bought and use the ShortV receiver.
When lifting, it is easy to place a piece of wood under the vehicle's Side Stand, keep the vehicle as upright as possible, and slide the Roller Stand under the vehicle in an image.
If you are not familiar with it, lift it carefully so that the receiver does not come off.
I think that up to 180 kg or so can be pushed in and STAND applied with their hands without using their feet.
View detail
Short low ler takes up little space.
The lightness and ease of handling are impeccable. I am satisfied.
I use it on my Racer, but it is also useful when I carry it on the Transporter because I can hang it on my STAND.
View detail
I like the CHIC Black!
Familiar with Maintenance Stand JTrip." The Short lowler Rear Stand of the
I used to use Long Type, but I wanted a compact Short Type, so I replaced it.
such as the V-supply. "Taken." I chose this product, which does not come with a receptacle, because I already have a I was also happy to see that this product comes in a choice of Black.
After opening the package, the Roller part needs to be assembled (easy).
It's hard to explain, but I liked the texture of the Roller. It's easy to use and seems to have a luxurious feel.
Naturally, it required more force to Lift up compared to the Long Type.
I liked that it rose to a good height with the lowest height adjustment.
If you have a large work Space or storage area, you may want to use the Long Type.
View detail
J-TRIP Short roller stands
I used it to replace the Exhaust System on my Z900rs, and in combination with the V-shaped Hook, I was able to stand it up by myself without any problem. The price is not cheap, but it was a good decision to buy a new one from Webig because you can't find used ones on Yahoo Auctions or Mercari, and even if they are listed, they are full of rust and the price is high for that. View detail
When in doubt.
I was looking at APRO and DTONA products, but the quality was not good enough.... So, I decided to buy one from JAPAN because of its high price but reliability. My car did not have a hook bolt, so I bought one separately. Installation was easy.
When I tried to use it, the Mud Guard was in the way and I thought I had made a mistake in purchasing it. I thought about it carefully and realized that I had to remove the Mud Guard, and then I attached the V-receptacle I had purchased separately to the body and lifted the Rear Tire.
View detail
Very easy.
I watched the official YouTubeChannel to prep it and it was very easy to use. Car wash and Chain Shiko are very easy. It is so easy to use that I wonder what I had to do with the Roller stand until now. If you wash and maintain your car frequently, this is a must-have item. Additional purchases are a V-receiver, a thing to keep the front brake lever pulled, and a bush to attach it to the car body. I purchased the "Helpful Rubber" as an insurance policy, but it has not been opened yet and has not been used. View detail
Additional purchases
I purchased the Hook originally for maintenance etc., so I purchased only the Body.
I am satisfied with it because it will be useful for Large change if it is available.
View detail
A must for maintenance
First of all, note that Body alone cannot be used, but requires the receiving Bracket.
Also, some receiving brackets may not be used for certain types of vehicles, so make sure you buy the right shape for your motorcycle.
The Rear Stand is essential for various maintenance around the Rear area from Chain cleaning, and it is also necessary to keep the Rear Stand upright for work using the Front Stand.
NarrowSTAND would have been better for 250ccClass because the Tire is not thick enough.
I used to have NarrowSTAND, but it is slightly more compact in size.
There are no complaints or dissatisfaction with the quality and usability of the product, which is the quintessential J-TRIP.
Gold amount is slightly higher than others, but I have never heard of J-TRIP's STAND breaking, so I think it is possible to buy it for a lifetime.
View detail
I'm concerned about rattling in the adjustment area.
Although it is a Short Type, it could lift about 220 kg without any effort.
I think Large people will choose Bobbin type, but VPlate is more stable and easier.
I wonder if they dare to do so to make it easier to match, or if the rattling of the adjusting section is Largekiku rattling.
If you bite a piece of wood on the Side Stand to keep it almost upright, and then stand on the Right Side and hang it with your foot, it will not rub off.
Once purchased, it will be semi-permanent. It will expand the scope of maintenance, so if you are not sure about it, buy it.
View detail
J-trip after all
Smooth operation with less resistance when STAND is applied. View detail
Maintenance essentials
It is a necessity for Maintenance.
Since it is parallel to the ground, it can be used for oil change, chain cleaning, wheel cleaning, tank removal, etc.
Also, Motorcycle looks good with STAND installed.
View detail
STAND up for courage.
Used with JT104H. Instruction ManualThe machine stands upright without any difficulty, even though it is structurally impossible to collapse. View detail
Maintenance Stand
This is the first time I have used the Maintenance Stand and it seems to be useful for cleaning the Chain. It is also good for storage. View detail
Parenthesis is a good partner for maintenance and display.
[How is it used?
Used for vehicle maintenance and storage.
Did you receive the item as per the Image?
As a maintenance stand, it is a very MAJOR product that can be found at any motorcycle supply store.
How did you like it?
It is very easy to use because it is equipped with rollers, so it can be lifted up without effort, and the fact that the rear wheel can be set free is very helpful when changing tires or maintaining the chain. It is also good for parenthesis as the Motorcycle looks like a Racer when not being ridden.
[Points to note]
This product holds Swing Arm Hook section (L-shaped Hook, V-shaped Hook, Shaft Type, etc.) are sold separately, remember to purchase the correct Hook for your vehicle.
I use the V-shaped Hook type, and when I am in a hurry or tired and my attention span is low, one of the Hooks is firmly in the Quantity.:I have almost knocked over my Motorcycle several times trying to lift it up without setting......................be careful.
How did it compare to other products?
There are various products that are less expensive and Parenthesis better than this product. Related parts are relatively easy to find anywhere." (If you want to buy an L-shaped hook when you switch to a motorcycle that is not compatible with a V-shaped hook, you can go to the nearest motorcycle supply store to buy one.)
STAND's Color line nap is abundant and can be coordinated with MotorcycleManufacturer's Image color (simply Parenthesis good!!!). ).
0Other items that may be useful include
Point and hang of installation
The height of this STAND can be adjusted to match the tire diameter of your motorcycle or to the height of the maintenance work you want to perform.
As I mentioned above, when Lift up, Hook is firmly in placeQuantity:Make sure it is Set before lifting.
[ITEMS TO BUY TOGETHER
Remember to purchase the correct Hook for your vehicle. If you have to reorder afterwards, you will not be able to lift up your motorcycle even though the STAND itself is right in front of you...which is a shame.
[Opinions and requests to Manufacturer
Color custom order PURAN would be even better....
View detail
J-Trip Short low ler Rear stand
The STAND height is just right, neither too high nor too low. View detail
With [ he buys it and ] no mistake!! He should have bought it earlier (^_^;)
With [ he buys it and ] no mistake!! He should have bought it earlier (^_^;) View detail
The direction maintained by itself is indispensable. There is a rigid feeling and it can carry out the lift up of it in comfort. Since the short type can carry out lift up on foot, supporting a car body by itself, it is really easy.
The direction maintained by itself is indispensable.
There is a rigid feeling and it can carry out the lift up of it in comfort.
Since the short type can carry out lift up on foot, supporting a car body by itself, it is really easy.
View detail
Short and Perfect
I set it to Short for use with InnerGarage.
It is also lightly used in Short.
The V-shaped receptacle was purchased separately.
The color is Black and very Parenthesis nice.
View detail
j-tripRear stand
Wheel cleaning is very easy when returning from a touring trip.
Easy to raise Rear, stable and Large satisfactory!
I can't do much work myself, so someone who can do the work can do maintenance as well as a motorcycle shop.
View detail
The best thing is that it is easy to give away.
It is easy to raise the vehicle, compact and easy to use. I use it in my transporter as well.
It is necessary to prepare a V-hook to match the stand hook of the vehicle.
View detail