Reviews
Fits: KAWASAKI ZXR250, KAWASAKI KLX125, KAWASAKI D Tracker 125, KAWASAKI BALIUS2, KAWASAKI BALIUS, KAWASAKI ELIMINATOR 250V, KAWASAKI ZXR250R
KLX125
KLX125
DrumstickDrumstick fits!
View detail
grunting or groaning sound
I was convinced that I could be sure of the products here. View detail
It's confusing.
When you purchase Slip-on Silencer.
Click here to purchase Gasket." I bought it together with the Full Exhaust System because there was a LINK with it, but it was a part that I would not use unless I was replacing the Full Exhaust System.
I learned from the Instruction Manual for the Exhaust System I received that a joint gasket is required for the Slip-on Silencer for the first time, so this product was a waste of time.
I would like you to put up a LINK to the recommended parts to purchase for the product.
View detail
OEM same etc., inexpensive and good.
It was used for the second Exhaust System removal and installation.
The texture was almost the same as OEM.
Since it is Gasket, the feel is comfortable.
Quantity:1 Set of 2pcs. so it is also cosmetically pleasing.
View detail
OEM same etc.
Quantity:1 Set of 2pcs. to Spare when returning to OEM.
It's good enough
View detail
Reliable KITACOGasket
No problems at all! You'll have it in no time! Reliable KITACO products!
The only strong point is Quantity.:I want you to make 1 Set of 4pcs. too. (Lol)
View detail
Gamma's OEMChamber requires 4
[How is it used?
RGV250Γ (VJ22A) The new one was replaced with a new one for the ChamberMaintenance of the
How was your experience with it?
This was the first time for Gamma to install and remove chambers, but the description said that 4 chambers were required, so I purchased 4 chambers as described.
One SideQuantity on the Flange side and the Engine cylinder side between the chambers:2pc. I used 4 of them for sure because I need Set.
I installed it with a light Gasket and so far it is working fine with no exhaust leaks.
How did it compare to other products?
It was not particularly good or bad.
[Points to note]
At first, it is difficult to install because the direction of installation is upside down!
It is better to stick with liquid Gasket and replace it. (Large strange to take it later, though).
【Review】
It was cheaper than OEM and functionality was fine.
For OEMChamber, 4 pieces are required, but for external chambers, it is usually Quantity:2pc. Set, or maybe even none.
View detail
KITACO Exhaust Gasket
Exhaust Gasket for ADDRESS V100
ADDRESS V100 that needs to remove the chamber not only when replacing the chamber but also when replacing the rear tire.
Buy Exhaust Gasket Stock because I want to keep it.
I have used KITACO products in other vehicles and think they are reliable.
View detail
SR400Exhaust pipe replacement
The texture feels cheap compared to OEM Product, but there are no exhaust leaks.
I thought, "Can't I reuse the exhaust pipe and silencer at least once? However, it is very troublesome to re-install the exhaust pipe and silencer after the exhaust leak is discovered, so we will not be stingy and replace them with new ones every time.
View detail
In reserve for Replacement
I bought this as a spare. I will probably purchase more soon! View detail
I was prepared, but ….
The Gasket could not be removed and was reused, although it was inexpensive and ready to go. View detail
Exhaust System Replacement
Product Name
KITACO KITACO Full Exhaust System Gasket (1 Set of 2pcs.)
Item Number
963-2000005
Vehicles
GSX-R125 ( 2BJ-DL33B ) 2020
Number of man-hours
5 minutes
Required Tools
Torque wrench, hexagon socket, Hexagon socket, Extension bar, Combination wrench, -Driver, Hammer, Pliers, etc. would be perfect.
Why did you choose this product?
To replace Exhaust System
Was the one you received as per Image?
It was just like the image.
Was the installation difficult?
not particularly difficult
How was your experience with it?
There does not appear to be an exhaust leak.
[Included Parts:were they on?
nothing special
[Was there anything that disappointed you?
nothing special
Other items that would be helpful
Installation points and hang/Availability and clarity of the Instruction Manual/Points to consider/Items to purchase/Opinions and requests to the Manufacturer
View detail
To CT110 HUNTER CUB
Installed together with Exhaust System replacement. After the installation, there was no exhaust leakage. Don't forget to replace the Gasket when replacing the Exhaust System. View detail
Perfect fit, quality product
cheap and high quality.Excellent functional product. There is nothing complicated about it.Would recommend! Fast shipping as always too. View detail
Cospa is good
Scooter has to remove the exhaust pipe every time we change the rear tire, and we try to replace the gasket each time, but the price of OEM products is high. I have been searching for a more cost-effective product.
This is not a product where you will notice a difference in performance, but because it is a consumable product, it meets the objective of keeping the price low.
View detail
It's usually good
OEM is Quantity:2pc. You need to buy a Set, but this is Quantity:1 Set of 2pcs. so it is slightly less expensive. I recommend this product because there are no exhaust leaks so far. View detail
Used with CUB110
Used on JA10. It is a normal Exhaust Gasket.
Some people don't change it, but I think it is better to change it properly.
View detail
Quantity:Seeking 1 pc!
I used this Gasket when replacing the exhaust system on my CRF-125F. However, I think it would have been better if I could have purchased it as a single item and at a lower price since I use only 1pc. of the Gasket for CRF-125F. View detail
Thank you.
No problem
Easy to use
Thank you.
View detail
It's still good
I have been using this product series from Large Motorcycle to Moped for a long time.
I do not use the old ones because there are no exhaust leaks and they are inexpensive, so I feel comfortable installing new ones every time I use them.
If you are concerned about the possibility of exhaust leaks after reuse, the safest thing to do is to use a new one.
View detail