Reviews
Fits: HONDA ATC90 90 - All, HONDA ATC90 90 - All, HONDA ATC90 90 - All, HONDA ATC90 90 - All, HONDA ATC90 90 - All, HONDA ATC90 90 - All, HONDA ATC110
No doubt in terms of performance.
We selected this one due to its dimensions for the production of a custom motorcycle.
Unlike cheaper Power Filters, there is no doubt about the filtration performance, intake resistance, and other performance aspects, but I always wish the rubber part was a little better finished.
Oil should be applied in small amounts in high places and allowed to permeate gradually by gravity, and should not be sprinkled over the entire area from the beginning (over-application).
View detail
Fits: Others , SUZUKI GOOSE250, SUZUKI GOOSE350
Adjustment of carburetor is severe
The Engine sound became Large.
Difficult to adjust carburetor.
Pilot Jet remains the same.
Pilot screw was set back 1.5 turns where it was originally set back 1 turn to stabilize Idling.
Main jet and Needle are exchanged.
It is good up to about 4000 rpm, but at about 5000 rpm it starts to cough and the power drops off.
When I look at the Plug, it is White and when I adjust it to make it thicker, the Idling is not stable.
It's hard to do!
View detail
Fits: Others , SUZUKI GOOSE250, SUZUKI GOOSE350
Good appearance. Performance has not yet been experienced.
I put it on a GOOSE 350.
It replaced the Air cleanerBox that was taking up Space.
If I try to remove the existing Air cleaner, I have to remove both the carburetor and the Indicator, which is a hassle.
But I changed it to this guy and Refreshing.
The intake efficiency is also increased, so the jet and needle are changed and the ignition is ready to go.
Idling is unstable, but when I give it a push, it turns smoothly. However, when I turned the Axel back on, the engine stopped.
Oh dear - another carburetor breakdown.
When I carburetorRose, I think Dust or something got in there and clogged up the Pilot.
So, I have not been able to experience it yet.
View detail
Air Filter Round Taper Type from K&N
* About quality and texture, A pleated cotton cleanable pod style air filter and nicely finished chrome end piece. * About the feeling of use, This air filter was used in the creation of a custom air intake for a Monkey 125. Has performed as intended and looks good while doing it. * Products to buy together, Since the K&N air filter's location allows it to be exposed to the rain, then a K&N pre-charge cover is a great idea at add for a little water resistance. * Difficulty of installation, Installation is just positioning the air filter on the intake pipe and securing down the included hose clamp. The process was completed in 2 minutes with no difficultly. * Cost performance and comparison with other products, The K&N air filter is more pricey to purchase then most pod style air filter but they do state they have a lifetime use design. So if maintained will last you much longer and end up cheaper then constantly purchasing disposable paper air filters. * About shipping and packaging, I am happy to wait 6 weeks on average for my parts to arrive in Sydney Australia via Webike's sea freight which comes with tracking and insurance so I know I'm covered in case something was to go wrong but with there outstanding bubble wrapping and boxing there have been no problems. * Any concerns, cautions, or advice when purchasing, If you a researching a particular size air filter for a custom intake you can use the K&N website to assist with measurements. Use the product reviews to assist in making a decision on your purchase. View detail
Fits: HONDA DIO, Others , HONDA CUB SUPER CUB, HONDA JAZZ, HONDA MONKEY
Installed on KEIHINPC20
I use a PC20carburetor on my 4MINI and I combined it with K&N's air filter.
I did not use the Filter oil that came with it.
The reason was that the Carburetor setting was about to change.
Compared to the Sponge type air filter, the intake noise during acceleration will be a little quieter.
In terms of performance, it will extend a little at high rpm.
View detail
Fits: HONDA DIO, Others , HONDA CUB SUPER CUB, HONDA JAZZ, HONDA MONKEY
It will last a very long time if you keep up with the Maintenance.
I've been using it for 2 and a half years since I bought it, and Rubber hasn't deteriorated at all.
If you do maintenance well, you can use it for a very long time.
Although the initial cost is high, the Power Filter from Zitna and Zekegawa is the best choice.
It's a small price to pay when compared to the cracked and shabby appearance of Rubber in a few months.
If you buy the large capacity detergent and oil for maintenance, you can use it a lot of times.
I can highly recommend this product as its performance is proven.
View detail
exchange
I'm using it for YOSHIMURAcarburetor, but I'm replacing it with this one for replacement. since I don't need Sticker, I think this one is cheaper than YOSHIMURA. View detail
Fits: HONDA DIO, Others , HONDA CUB SUPER CUB, HONDA JAZZ, HONDA MONKEY
K&N air filter
I changed my exhaust system for my Kawasaki z125 pro and maintained the stock air box. No different in performance but, once i changed to this air filter, immediately i can feel the difference in acceleration and i also bought a Takegawa filter cover. View detail
Fits: HONDA DIO, Others , HONDA CUB SUPER CUB, HONDA JAZZ, HONDA MONKEY
It's safe to use
I chose K&N from a number of air filters.
I use it on my PC20 Carburetor.
The filter is a wet type which is soaked with the attached oil. A small amount of the oil soaks into the capillaries, and the oil soaks into the Beauty. Maintenance is a little expensive, but the K&N's exclusive Cleaner and Oil Quantity is included in the price.:There is a maintenance set, which is especially recommended for those who value performance, because MONKEY's Filter size is long enough to use the maintenance set.
View detail
K&NPowerful very good
I bought my first K&NPower Filter and was thrilled to find that the quality was better than I had imagined It is a change from the PE28FunnelSpec. of 4V to SUPER I didn't need setting The temperature was low in winter, but the idling was stable and the intake efficiency was good
I told myself that it was only a boxed set and expensive, and I had given it a second thought, but I took the plunge and bought it It was good It can be washed and used again, Parenthesis is good and Performance is good I'm looking forward to seeing how long it will last, though But I'm looking forward to seeing how long it will last
(Once upon a time, I used to use the famous Powerful dry type of about a thousand dollars, but the efficiency The "Hot Melt" in the adhesive part, the cracks in the rubber part, and the vibrations in the PlatingTop It was full of GAGs, with polo falls and such, but, you know, it's still worse than the same, and it's still scary I don't want to use my hands,...)
View detail
Difficult to deteriorate
I've been using K & NFilter for 20 years but Rubber is soft.
Although I can still use it, I exchanged it for a new item just in case.
Direct sunlight does not hit because we have a garage. If you have a garage you will definitely have twenty years.
View detail
Best performance!
I attached the same Round taper Filter before, and it has durability for 20 years. There is no deterioration of Rubber. It was not deteriorated too much and I got worried because it was too durable and exchanged. Somewhat, because I put it in and out with carburetor's Maintenance entrance is a little Downs, but it is the best Power Filter. (Inner diameter 49 mm) View detail
Fits: Others , SUZUKI GOOSE250, SUZUKI GOOSE350
Although it was used for RGVgamma250, it has removed now.Wearing is possible although there are some difficulties in gamma attachment.It was used after carburetor TM34 (outside diameter of 57.5 mm) replacement of parts of Aprilia RS250.If it
Although it was used for RGVgamma250, it has removed now.Wearing is possible although there are some difficulties in
gamma attachment.It was used after carburetor TM34 (outside diameter of 57.5 mm) replacement of parts of
Aprilia RS250.If it is carburetor direct attachment although the thing of tapered form with a
caliber of 57 mm was chosen, although a right-hand side carburetor is possible, in Space, about a left-hand side carburetor, it interferes in the cross member part of a right-and-left Frame, and a few must be crushed, or
of it must be carried out, and it must dent some Tapers.Because there was weight also about
right-hand side since it was a wet type, the cab over flow of metal by Air-cleaner vibration twisted some.(V type Engine, therefore right-hand side also have that it is setting out with severe fuel level and Overflow Pipe)
Although it thought and the Piping was used between carburetor Air cleaners, by the Piping, a left-hand side interference changed the angle and it has solved it.It is thoroughly unsolvable although
right-hand side moved the Air cleaner to the circumference of a Bolt hole of Normal Air-cleaner BOX fixation by the Piping, and was considered as the oscillating measure, and fixation was also tried on the Band etc. using the Bolt hole, and it changed to the small Overflow eventually.
Since Maintenance nature was also missing when it was the above-mentioned system, carried out direct attachment of the last, but.Since it judges that it is possible for it to be an Air cleaner of S&S, and it uses now, while denting in order to lose interference of a left-hand side carburetor, but it is a dry type Type ... There should just be a Size with which it can equip without interference by
K&N.
View detail
Fits: HONDA ATC90 90 - All, HONDA ATC90 90 - All, HONDA ATC90 90 - All, HONDA ATC90 90 - All, HONDA ATC90 90 - All, HONDA ATC90 90 - All, HONDA ATC110
Since he wanted to attach a Side cover, the goods here were used. Splendid merit that's right although the Setting has not come out yet.
Since he wanted to attach a Side cover, the goods here were used.
Splendid merit that's right although the
Setting has not come out yet.
View detail
It attached to estrella RS of 2002 models. Although the suction noise of idling was not very loud, the suction noise became quite large when turned. Since inhalation resistance decreased in respect of the engine performance at the time of low rota
It attached to estrella RS of 2002 models.
Although the suction noise of idling was not very loud, the suction noise became quite large when turned.
Since inhalation resistance decreased in respect of the engine performance at the time of low rotation (a little more than [ ~2000rpm ]), I feel that a horsepower fell a little, but it is extended very well after it.
Since appearance also becomes markedly better than an air cleaner box, it is recommended.
View detail