The uses are unlimitedLarge!

I used it to secure the sub-computer on my Ninja 250SL, but I had some left over so I used it on the screen door of my front door! The adhesive is strong and does not come off, yet it is easy to put on and take off! This is really convenient! I think it can be used anywhere as long as it does not get wet! It is easy to install because you just need to remove the grease and stick it on! It is the most convenient product! View detail

Good, including storage when not in use.

Installation was easy and stable.
Back Cover had to be bunted to keep it loose or the Cover would flop around a bit while driving!
Even the slop on the bottom of the Back was removed with a quick wear!
When stored, it flattens out to save space. View detail

Highly satisfying just by the look of it.

The instruction manual is not clear enough. I recommend you to watch YouTube to see the image before you start the work. The ride quality is so different that anyone can tell the difference! View detail

Processing is beautiful

Bolt and Shim will be provided separately.
M10×25?Pitch1.5 and M10×25?Pitch1.25 are available.

The processing is beautiful and the rigidity seems solid.
I would have liked Bolt and Shim to be included if possible. View detail

At One point.

OEM Product quality is a must.
I don't think you will see this in FOR JAPAN MODELSEA BASS View detail

Takegawa Quality

Looking to mod the bike in the future so whilst servicing the bike cleaning the spinner and gauze this upgrade makes sense. Provides more flow than OEM and is so simple to replace. As always Takegawa parts are reliable and of high quality. If you are increasing the CC of your bike you need one of these View detail

Yoshimura Bling

I ecpected this to be just another keyring. It is but with Yoshimura quality even down to the packaging its A*. Now I've got rid of the dealer keyring and replaced with this elite keyring. Made from premium materials. Embossed on both sides as well. The actual ring is very rigid and needed quite some effort to mount it to the bike key View detail

Required but impressed

The stock springs are far to soft and the lifter plate is cheap and is known to crack if you use stiffer springs. Replaced with this high quality item. It immediatley changed the feel of the clutch and in my opinion is now how it should of been from the factory. View detail

Easy upgrade

This item is high quality and is very easy to fit. Its a must to get rid of the restrictive stock air filter with a small surface area and this is a easy cost effective solution. Very well made and low maintenance View detail

A tech under cowl

I ordered this for my 2023 z125. It fits perfectly. Really makes it stand out from the stock look. Love the product. Highly recommend to anyone that's interested. View detail

Volume control

[How is it used?
The volume of the external exhaust system that came with the used car when I bought it was too loud,
After Fire was also available at the same time, so it was purchased for exhaust adjustment purposes.

Was the one you received as per Image?
The size error was very small, and it was possible to mount the unit on a pontoon.
However, in our case, it will be installed in the exhaust pipe side of the exhaust system,
Drilling + Rivet fixation.

Was the installation difficult?
In the case of our vehicle, the exhaust system was inserted into the exhaust pipe,
The fact that we could not bolt on was something we could have anticipated,
Also, I had all the necessary tools on hand for processing,
It wasn't a difficult task.
We have an O2 sensor attached to the exhaust pipe on our vehicle,
It was also necessary to machine the contact points with a hole saw.

How was your experience with it?
I was able to reduce the volume from the original explosions,
For starting up (when cold), the volume is still too loud to be noticed in residential areas,
Once the Engine is started, it is ready to go.

[Included Parts:were they on?
Quantity:I bought 2pcs, but one of them had a bolt nut that came off,
It was playing in the bag.
However, it is not visible once it is installed,
I'm not talking about the scratches.

[Was there anything that disappointed you?
none in particular

Other items that would be helpful
At the very least, measure the inside diameter of the piping at the planned installation location before purchasing.
For those who intend to install the product by themselves, some manufacturing errors should also be taken into account,
It is advisable to have some processing tools and liquid gas available. View detail

For Mount bar mounting

[How is it used?
For rare vehicles that do not have a dedicated AttachmentMount bar,
Used to tighten the Bracket together with the Switch Box.

Was the one you received as per Image?
I have purchased this product in the past when it was processed on another vehicle,
The quality of the product is very low, and I think it's a perfect Spacer product.

Was the installation difficult?
Both inner and outer diameters are exactly the same as indicated, so it is a simple installation.

How was your experience with it?
The outer diameter is exactly the same size as the head of a Bolt with a hexagonal hole,
It fits in the bolt hole of the SW-BOX EXACTLY as we intended to use it.

[Included Parts:were they on?
Included Parts:No setting

[Was there anything that disappointed you?
There is none

Other items that would be helpful
Since the only colors available are Silver and Black,
It would be nice to have other colors. View detail

I'm just pimping...

[How is it used? Town ride

Was the one you received as per Image? It was a little different.

Was the installation difficult? Simply replace the Connector and you're done!

How was your experience with it? The light went from a light bulb color to a white light color like a White color fluorescent lamp, and the light was confirmed to be lit well even in daylight.

[Included Parts:were they on? Two Tie Wraps in Black for outdoor use

[Was there anything that disappointed you? Quantity of claws to fit into the insertion slots.:Pair (for Left and Right) Wiring is oriented in the same direction, so depending on the direction, the wiring is short and may interfere with the cowl, so care must be taken when routing the wiring.

Replacement of ▼Lamp requires removal of the exterior of the car body, No.2 long and short +Driver, M10φ? SocketLunch. View detail

Color is perfect.

The paint was painted with the same color number as the OEM, so the colors matched perfectly and there was no discrepancy at a quick glance.

But the paint on this product is too good to be different from the rest of the product if you look closely.

To put it simply and to the extreme, the paint on the Manufacturer is light and tangerine, whereas this product is smooth, which makes a difference in the reflection of the scenery.
The reflection of this product is definitely more beautiful (laughs).

I thought the painted surface of a commercial vehicle was like this, so I felt that the beautifully painted surface was a turn-off.

I just put it on and don't know how durable it is, so I'll give it 3 stars for now.

However, I am glad to have replaced the Guts Mirror because it looks good and is no longer a nuisance in the car wash machine, etc. View detail

Increased stability

I was wondering if it is supposed to be run with luggage in the Pannier or in daily use without the Pannier.
We replaced the OEMSuspension because we were concerned about the firmness and rebound of the OEMSuspension, especially when going over bumps.
After replacing the ring, the shock when going over bumps is reduced and the stability at the corner ring is increased.
It also has a lowdown effect of about 15m when riding, which improves the footing. (We are 171cm tall and have a long torso, Japan human body type)
I am satisfied with the performance of the Large, but the cost of the product and labor (Red Baron) was less than 100,000 yen, so I have given it a low cost-performance rating. View detail

No complaints ??

Good accuracy/quality,
It can be adjusted more finely than NORMAL,
It also increases operability.
Basically, if you follow the Instruction Manual, there is no problem,
Only Brake switch,
Some PedalPositions may need to be crafted.
The structure is simple and can be made as small as desired,
I don't think it is a Larged issue. View detail

Just right!

For me, it is not too large and not too small, just the right size. The installation can be done by anyone since all you have to do is stick it on, and the price is reasonable, and the change in appearance makes it a good value. View detail

Active Rear Caliper support

Purchased this for the Swing Arm and to replace it with a Brembo caliper. View detail

Functional product at a reasonable price

Great product, has low and full oil level markings on dipstick that match my stock dipstick and the gauge lets me monitor the oil temperature while riding. I know some purchasers have complained about the lenses fogging after they followed the directions to disassemble the gauge to adjust temperature scale but I'm not going to risk disassemble. View detail

Excellent Quality

This is very well machined. Dimensionally its better than mitomo. Always high quality from Yoshimura. Another little trinket that sets the bike off. View detail