The netting is too soft and difficult to replace.

The netting is soft, so when the bolt is tightened, it flattens and is not parallel to the bolt. View detail

Wow that's cool

We plan to go full A-tech, so the core guard will be A-tech as well.
Logo is cool! View detail

Good Accent

The OEM Core guard was painted about 2 years ago, but the paint didn't last long because the rust was not removed properly and the surface preparation was not good enough. I thought about repainting it, but I thought it would rust again after a while, so I decided to replace it.
At first, I was thinking of Plain ones without Logoetc., but I chose A-TECH because of its low price.
Regarding the product, although it was unexpectedly thin, the finish was good and favorable. The precision was good and the mounting holes were Exactly. It is also finer than OEM, so it will be more effective in protecting the Radiator. I was concerned about the chatter sound, so I thought about using the anti-vibration material that came with the product, but the upper hook is folded back to the point where the core guard is effectively attached to the radiator. However, the upper Hook was folded back so that the Core guard was almost stuck to the Radiator, and the attached anti-vibration material did not seem to fit in the almost no gap. I ran a test run and did not feel any chattering sound, so I decided to use it as it was. Then, in the Instruction Manual, it says [Color] It says to clear paint it, but I'm thinking of using it as is for the time being, and then doing it together when I have a chance to paint something else.
I thought it would be better without the logo, but when I installed it, I feel that A-TECH's logo is a good accent. I guess there are people who like this kind of thing, but for me, I like it. View detail

Because OEM Guard is not tasteful.

The OEM Core guard is tasteless, so as a Carbon lover, I chose this one.
It does look a lot better!
It is easy to install because it is only Screw. View detail

It's one of the cheaper Other Brand Products!

Used for CB400SF 2016
It can be installed without any problem. Small Size Spanner or MONKEY is required for assembly.
In the Instruction Manual, it was written that the Amiami part is supposed to be painted.
I assembled it without painting because it was troublesome, but originally it was [Color] It seems to be better to paint with Clearetc.
I will paint it when the rust starts to show.
Now I'm wondering to what extent the Carbon part will keep clean.
[Color] Clear painted carbon parts, but I'm worried about deterioration by sunburn and heat.

You can also buy a Guard made by another company for a few thousand yen difference, so you may decide on the Wallet and Design! View detail

I think it's best.

Although there are many manufacturers of Core Guards, you don't have to worry about the manufacturer of the exhaust system you are installing. Installation is easy. View detail

If you think of Radiator core guard, this is it.

few in number of items (I guess it's too old for that.) The A-TECH star is cool! (FLUSH Gordon-like.)
Quantity:Pair (for Left and Right) The X4 has a glossy Carbon Style design which is also a nice touch, except for the Mark, which is a mesh and has no problem with ventilation.
It also comes with an A-TECH sticker. (I'm not wearing it.)
Installation is easy - just remove the OEM Product and close it with the Hexagon Nut.
View detail

Large satisfied

Installed on ZrX1200 DAEG
Even as an amateur, I was able to install it in less than 30 minutes
I ran it after it was installed
No scare noises, no problems

The best part is that it looks good in Parenthesis View detail

I like the fine mesh

I installed it on a CB1300sf2019MODEL
The first item that was shipped was misaligned with the hole on the side that secures it to the Radiator, so we had to replace it and I got it The replacement was also slightly off, but I'm glad I was able to put it on as long as I pushed it in

The part where the core guard touches the Radiator is the Small side of both Sides Since it was next to the Bolt, I put the attached Skimmer Cushion on it

As for the fitment, there is moderate Tension and driving wind etc., on the Radiator side It doesn't seem to be pushed in

If I wanted to, I would like to see the holes on the side of the Radiator to be moved back a bit It's just a matter of shaving it by yourself

I haven't run it yet, but it's finer than the OEM's governing Guard, and the Bug Attacks It seems to be expected to prevent View detail

It is difficult to put on!

Rubber packing something like that. I'd like to get one new Packing. You had better put on Shop. View detail

For Radiator protection

I installed it in NINJA 1000 made in 2016.
To prevent deformation of Radiator's fins, I bought it.
Installation was possible without removing Cowl. Just hook the top claw and fix it with Bolt. I liked Design and I bought it, but since Ninja has Cowl, I can hardly see it from the outside..
When I installed it, Radiator and Core guard did not partly fit and the gap was empty. Cushion wood was also enclosed, but I did not use it especially because there was no beating noise during running, but I was a little worried. When installing, I think that if you deform a little even a little gaps will be available. View detail

Almost in appearance

When you tried whatever you were Customing when exchanging.
I installed Bolt as Gold.
It will be nearly 10 years, but there is nothing wrong. " View detail

Lunasole and Brand Unification

Initially, I was at a loss as to KFACTORY's Guard,
Since HALF COWL is A-TECH, we will use A-TECH
I decided on, Gert Body I think if there is more thickness View detail

Radiator core guard installation

OEM made rust due to peeling off of coat film made of iron and purchased including Maintenance. The reason for purchasing A-TECH was decided by shape with Brand.
In installation, we attached Sound-absorbing Mat for preventing Chatter sound to Center in four directions.
After exchanging it is a good feeling to shut up with Logo mark! View detail

CB1300Sb2015

I was wondering what to do with the Core guard, but this was the only thing I did, I did not mind otherwise apparently changed it.
I do not have any flavor and anything, I can use it comfortably.
It was a bit of a hassle to remove HALF COWL. View detail

13 years installed in SC59 Repsol

Installation requires minimum removal of One Side Cowl.
If it is troublesome and you work without removing it, the Radiator will be full of scratches. Fitting, such as dimensions, is perfect. View detail

To protect Radiator

The Radiator of the Motorcycle I was riding in before was pretty crushed, so I thought if we could protect it somehow, I knew there was Core guard.

I installed it immediately from the beginning and immediately after delivery.

The installation is easy to wear just by catching the nail on the upper side and stopping with the Bolt 1 pc on the lower side.

The outer net is rough and stepping stones etc. There are many inner mesh is finer so we can expect a protective effect.

Accuracy and quality are also satisfactory. View detail

Without Logo RType.

Material is Stainless Steel, but for the Instruction Manual "Painting is a prerequisite" There is a notation with.
I think that most people use it as it is in Unpainting.

Thickness, MachiningCut, Material, Design, None are beautiful.

Design has Logo, preferences can be separated without logo, but I chose R without logo as a dare.

Cut part with Logo and Cut part without Logo are probably the same Design (Same Cut size) I think, "Well, well, if this size is Small, Small stone... It was one of the reasons I chose R.

Although there may be a slight cooling effect drop by that amount, because it is Hokkaido... I believe.

Although it is without logo, the resin Seal of Manufacturer logo is affixed to the bottom of the product, but since it was slightly floating, I will make 4 stars. View detail

Easy to install! Also effective for Dress-up.

【What made you decide the purchase?】
I care about insects attached to Radiator.
Since I was attaching Core guard made by A-TECH also to the vehicle that I was riding the previous time, I knew about the product.

【How was it actually used?】
Although it is an inconspicuous part in vehicles covered with Cowl
I think that it will be Dress-up for NAKED type vehicles.

【Mounting was difficult?】
It is not difficult..
On the upper side, hook the claw of Core guard to Radiator
The lower side is fastened to Radiator's OEMBracket with Bolt, so even those unfamiliar can be easily attached.

【Please tell me the installation point and hang】
If the Core guard gets somewhat flaky, cut off the included Sponge and cut it and it will stabilize.

[Is there anything I was disappointed about?]
There is none.
Since it has been purchased in the previous vehicle, it is the product as expected.

【Hope for Manufacturer - Please let me know if you have any improvement points]
I think that there are things such as weight
I think that it is good if there is a little more thickness.
(Because it is thin PEP LePera. )

【Have you compared items?】
There is none.

[Others]
Logo of A-TECH is cool. I like it! View detail

It is Core-guard wearing to its own car and a ZRX1200 DAEG. The attachment rather attached by appearance serious consideration is also easy, and time is not taken so much, either, but it is the completion of wearing.To be sure, appearance is satisfied

It is Core-guard wearing to its own car and a ZRX1200 DAEG.
The attachment rather attached by appearance serious consideration is also easy, and time is not taken so much, either, but it is the completion of wearing.To be sure, appearance is satisfied in several steps having become good. View detail