Parenthesis so good!

I haven't installed it yet because my car is still in the process of restoring it, but I'm sure it will improve the Parenthesis. View detail

I ordered the Full Exhaust System for the pi... 。。。。。

The one not for Full Exhaust System pie arrived.

but the wait was so long that I gave up on returning and exchanging the product.

However, the custom feeling was UP. View detail

It's cool, I think.

I received the product and tried to fit it, but when I straddled it, the minimum ground clearance was about 5 cm. I tried to install the white Gel Coating, but it was not pure white because of the BALI removal. It is not usable unless it is painted.
I have a Wyvern two-pipe exhaust system, but if I don't remove it a little, the exhaust pipe hits me.
So I gave it away, unused and new.
I thought about painting it and attaching it, but decided against it because it would rub my stomach every time I went in and out.
I wanted to put it on since I am wearing a LunasoleCowl. It was a pity. View detail

The presence is not overwhelming.

It is very beautiful and easy to install, but may interfere with an external exhaust system. I modified it with Grinder. It is easy to remove and does not use tie wrap like other products, so it looks beautiful and has a high quality feel. View detail

Perfect for XJR

A-Tech Twil wave carbon for Yamaha XJR 1300. Part is exellent quality and final finish of the prodilict is immaculate. Fitting is easy as the part is exact match for frame. EXELLENT View detail

ZX14RUnder Cowl Dry carbon

[How is it used?
Under Cowl to match the Front Fender
carbonization
Was the one you received as per Image?
A-Tech's Under Cowl is designed similar to OEM.
At best, it doesn't disrupt the OEM balance.
To put it badly, there is little change and little sense of customization.
Was the installation difficult?
If you don't have Leutor, the work is Large strange.
If you look at other people's Reviews, you'll see that it's quite a bit of grinding, etc. to install.
I had a hard time with it, but I cut down a lot of Left Side on mine.
The Right Side could be installed without any modification.
How was your experience with it?
CowlSingle Body is obviously lighter. But how does it work when driving?
For now, Carbon parts look good. 。
[Was there anything that disappointed you?
The product itself is fine. I can understand why it takes a long time to deliver.
I just need to Rose Cowl in advance to meet the delivery notification.
We received frequent delay notices and received the product two months after the original delivery date.
I want you to contact me after the delivery date is fixed from the beginning. View detail

Installed on VTR250 2010 MODEL

Installed on VTR250 in 10 years of MODEL.
First of all, I'm satisfied with the appearance of the engine, as it looks much cooler and less cluttered.
It's a minus point that you need to modify when you install an external exhaust system.
As far as installation is concerned, even a layman can easily put it on himself.
I bought this product completely for its looks and I am very happy with it. View detail

Honda h4 plow

I assess the quality of this product as good, I hoped that the product would be more rigid and the thickness of the material would be thicker. It is very light in weight, for the total weight of the motorcycle, the load is minimal, all the plastic that is used on the motorcycle by the manufacturer looks more massive and stronger. look at the sun, the material shines through, but I think this does not affect the strength of the product, since the double weave is very durable in itself. I ordered twill carbon. The product gives the motorcycle a more finished look and streamlined. After installation, the clearance has decreased, you need to move more attentively. I rate the quality of this product as good, I expected that the product would be more rigid, and the thickness of the material would be thicker. The weight is very light. look at the sun, the material is translucent, but I think it does not affect the strength of the product, as the double weave ulgerod itself is very strong. emost.Posle installation decreased clearance, you need to move more carefully. translated by Google Translator View detail

As generally expected

I purchased DAEG equipped for Full Exhaust System, FRP.
YOSHIMURAmachine bendedFull Exhaust System I installed it in a car, but the clearance between the exhaust manifold and Cowl is about 8 cm
I got free.
If it is Hand BentType instead of machine bended it may be reasonable Clearance.
For the convenience of the manufacturing process, the quality of Cowl itself seems to be made in tune, the matching part seems
It looks like it is broken.
I tried listening to Manufacturer inquiries, but that things will not break from there.
I seemed to be broken and that part was dented like Cord, so just in case Pate
Repair and the rear of Cowl was interfering with the Exhaust pipe so we cut it a bit and processed it.
View detail

Things are good.

Although it is the attachment part, since Cowl covers the Frame so that it covers the Frame, if you desorbed many times at the rubbing stage, cracks have entered the thin part of the upper part of Duct.
Clearance is the highest Level in the sense that it is really a beginner if you are a beginner.
It is good because things are good and cool View detail

I am very satisfied! It is 120 points !!

I think that it depends on the type of car, but processing to some extent is necessary!
In case of myself, I did the installation hole expansion and Pearl white painting myself and I like to install with adding hands!
FRP and Carbon are strong, so they will not break easily even if they are pulled! Processing is also easy!
After installation, I got a favorable review by Touring fellow!
Please also do whatever you wish to install and take a good look and I'm sure you will be satisfied like yourself! View detail

ZrX1200S A-TECHUnder Cowl

Under Cowl arrived and I was reading Impre so I was ready to work on it. First of all, I tried fitting before installing Bracket, I came up with, somehow attached, I checked the position of Bracket and removed it, While I was doing it a few times, there was an angle to insert, forcedly pulling it It seemed like it would crack if I tried it..
When Bracket 's position was Right, Left fixed, Under Cowl attached, a bit of Bolt' s hole was Gap, but when I pulled Bracket forward, Bolt also entered and managed somehow.
Work, time was around 30 minutes. View detail

A-TECH products in general

There is Merit due to its appearance and lightness, but here I will dare to enumerate mainly Demerit.

First, A-TECH Material : It is hard to say that it is all about Carbon products, but it is difficult to wear polo.

Although it looks very good, when I purchase the Under Cowl for ZX - 14R, when I try to install it as is, a strong Stress is applied to the fixed part with Middle cowl, - - - I thought "?".

Also, because it also interferes with Body, processing by File etc. is also required.

I avoided interference with Body by partially processing by File and biting 3 mm thick Color.

People who are not resistant to such processing, even if they can not be attached "Let's process it!" I think that A-TECH products will be suitable.
(There are also cases where you can attach some pongs... ) View detail

Wow ~!

Buy Full Exhaust SystemType.

ZrX 1200 DAEG, beetna Star 3 DFull Exhaust System.

Considerable, need for processing.

SETTING, there are 4 tubes in the water pipe.

Is it reasonable, is not it?

People who attach themselves are painting, processing, quite a tool,

Time is necessary,

Arrival, goods, BALI, and Crack were in!

It is troublesome, so it does not objection!

Even though it is tens of thousands of items, please inspect it !!

Dirt and oil stains were attached. View detail

A-TECHA-TECH Under Cowl

Material : I painted FRP with Black Gel and wore it.
Installation is not so difficult if you do exactly the positioning of Bracket, the first installation was about 30 minutes or so.
Once the position of Bracket is decided, it is not difficult to mount and remove it afterwards.
Although the shape is good, I thought that the making was somewhat clumsy, but I do not mind if I paint it.
Exhaust System is SP Tadayo PowerBox, but the rear end of Under Cowl slightly interfere with the Exhaust Chamber, so we made a little processing.
Perhaps when I changed Wheel and Rear suspension, I think that it is because I put Washer in the Exhaust Chamber attachment part and secured Clearance with Swingarm, so if you are wearing only PowerBox normally, I think that you can attach it without interfering I will.

View detail

Also for running Race and Circuit

I installed the under cowl of A-TECH for ZX9R E type.

If it is an OEM, you can hide the Exhaust pipe under the belly but you can hide it perfectly. If you are traveling in Circuit etc. Oil-acceptable things are needed, so should we process this into Base?

A drain hole is useful.

Not a little attention to those who attach Under Cowl of this system Although it is not something like a point, the hidden part under the belly (Especially under Oil pan) It may be better to wind Vantage etc..

Since the heat tends to accumulate in shape, the oil temperature rises and it tends to be apt to become somewhat likely, so the effect is high if you heat the Exhaust pipe itself.
Maybe you can stick a thermal barrier Seat to Oil pan itself.
Star-1 is a little installed and it is Large strange (It may be that you do not need FRP products for accuracy) Since the basic is for OEMExhaust pipe, processing is necessary if it is an external full exhaust system. View detail

It purchases for the engine Oil receptacle called for in the case of grass Race participation.This product that was the wearing OK was chosen in inside with many goods for which Side-stands attachment is improper, attached.There is also neither interf

It purchases for the engine Oil receptacle called for in the case of grass Race participation.This product that was the wearing OK was chosen in inside with many goods for which
Side-stands attachment is improper, attached.There is also neither interference with the car body nor a Gap of a Screw hole, and it is the completion of wearing easily.Water is also likely to tend to sell the Grommet of
lower part well also in the case of those with two place, and a car wash.It is a Recommendation in the direction by which the Sports run is carried out by the NORMAL marketing vehicle which is not the Race base. View detail

[Webike Monitor] It is the impression to which the whole Undercowl (Carbon) wearing of wish became tight. Since it is the elegance corresponding to pure Exhaust pipe, attachment is satisfactory. quality is not so high.

[Webike Monitor] It is the impression to which the whole Undercowl (Carbon) wearing

of
wish became tight. Since it is the elegance corresponding to
pure Exhaust pipe, attachment is satisfactory.
quality is not so high. The
Carbon has some Gaps. It is a grade which is not known unless it sees near
*. Be below careful of those of whom


purchase is done.

description description [cautions]
book products are premised on paint application.
Please be sure to attach to a main part, after painting.
-- if it is in a state as it is -- discoloration -- it deteriorates and becomes a cause of breakage.

I thought that it remained as it is and could use.

Since it is unavoidable, a Urethane Clear is purchased separately. if so written to

description-of-item Page --
-- Also purchased the CLEAR Spray simultaneously...
-- it is regrettable at unexpected expenses. View detail

Great item, and delivery took forever, shame it was the wrong colour for my bike, ordered black received white, had to spend £130 on a re spray. Having said that the customer service team were brilliant once again, in the words of the terminator “ I’ll be

Great item, and delivery took forever, shame it was the wrong colour for my bike, ordered black received white, had to spend £130 on a re spray. Having said that the customer service team were brilliant once again, in the words of the terminator “ I’ll be back” View detail

From ancient times, since he likes a Undercowl, it attaches. Since the form of the Undercowl of A-TECH is liking individually although it has come out from each company, it purchases. It was comparatively alike. since it did not need to delete

From ancient times, since he likes a Undercowl, it attaches. Since the form of the Undercowl of A-TECH is liking individually although it has come out from each
company, it purchases. It was comparatively alike. since it did not need to delete so much when it had to attach if it was not processed when exchanging for external mufflers, such as interference of the
Muffler, but it was itself, it was easy -- since ?

paint application was also cheap to the acquaintance and I asked it of it, it was saved.
Although the attached Silhouette is sorry to be self-satisfied, it is very pleasing! View detail