Reviews
Baffle itself is a nice inconspicuous shade.
We chose this shade of product because it is embarrassing if the End Baffle stands out.
When actually mounted on Silencer, it is good that the BaffleBody is almost invisible in the shadows depending on the angle.
In fact, I would like to ride with a straight pipe too.
View detail
I am satisfied that the volume is definitely reduced.
I used this product on an Exhaust System that was getting a little loud. It was easy to install, and I was pleased with how it reliably reduced the volume! View detail
Accuracy is good and Exactly fit.
I bought the Baffle beforehand so that it would not be pointed out by the volume at the time of inspection.
The HexBolt supplied with the Baffle is M5, so please check the diameter of the mounting holes on the Silencer side where it will be mounted, and you may need to extend the hole diameter if necessary.
View detail
Reasonable and nice.
I bought this to prevent disturbing my neighbors when I warm up the car. It's nice to have it on and obviously lowers the volume. View detail
It's a bit muffled.
When I bought the external exhaust system, the sound was much better than I expected, so I bought it. The volume was very low and the sound was very good. I think the sound deadening effect can be achieved by installing it near the outlet. And the cheapest one is the best. View detail
For sound quality changes rather than muffling effects
It is used in the W1 type Full Exhaust System for Posh's W650.
The bass was too much for my liking, so I put it on to get a little more treble out of it.
"Zudododododod. From "Flap flap flap flap. The sound changes to a crisp, crisp sound.
I didn't really feel the muffling effect, but it sounded more like an older motorcycle than the W1, with a crisp sound similar to the SR400.
The W1 is π34,5 as opposed to π35, so there is a slight gap, so I wrapped Glass Wool around it to fill the gap. The result was more like my favorite sound.
View detail
It will be quieter.
It will be quieter, but the sound quality will change. It's a floppy sound, so you can either take the volume or the sound quality ….
The Baffle itself has a Black heat resistant paint job and yet the mounting bolts have been replaced by the The nut is welded in place, so there is no hassle in attaching and detaching it.
I've changed the whole Silencer to a quiet one now, so I don't use it.
View detail
It's quieter in the low rpm range
MORIWAKIZeroTitanium (Tail Pipe inner diameter 51mm) The 50.5mm product is installed on the It's easy to install with just bolt on It's not too hard to fit
From Idol to 5,000 revolutions, there is a benefit of installing it, but above that, it doesn't mean much To a volume that I don't think is there....... But I think it's a thankful Items in a residential area
View detail
It didn't go in
It was a little too big to use
You have to watch the size carefully!
It seems to be well made for a cheap product
I would have loved to have used it
View detail
It surely silences
w650, c1 type OEMExhaust System purchased for muffling vehicle inspection measures after centering.
Tighten the supplied Screw tight from the inside, drill holes in the Exhaust System None required.
I adjusted the outer diameter with a grade bracket so it is not suitable for a little Large.
It is a temporary measure to the last.
View detail
Effect Batch!
It will be super quiet.
Although pulling as it pulls while accelerating,
Idling and running will be quiet.
Torque at low speed comes out, and the running changes.
View detail
It is noisy, but it seems like you'll forgive me for appearance.
RACING mounted on straight pipe exhaust system. We do not expect volume reduction at all and it is purchase only for appearance. The outer diameter of the product is slightly smaller than the outlet of the Exhaust System outlet, and the Glass Wool is packed for stopping the hopper. View detail
Cheap is attractive
I think that the function as Baffle is fulfilled. The price is too affordable.
Impression of installation was able to install with precision well with chitin.
Although I was concerned about the volume, I myself did not feel it much because the sound quality got slightly higher, but it was told that my fellows who were running together worked quite a bit of noise.
The exhaustion of the Exhaust System became considerably worse and valleys were made in the middle revolution zone.
However, it is the manners to ride in a noisy way - Since it is a Rule violation, let's take measures against chitin.
Finally I hoped that my choice would be to choose the inner diameter as well as the outer diameter but the outer diameter that fits my Motorcycle was only one item on this product.
View detail
It became quiet.
I attached it to the AXIS Rapo Exhaust System.
Recently, acquaintances have been caught by crackdown, and I bought it to make it in mind just in case.
It got quiet as expected.
When leaving early in the morning at Touring, will you not have to worry about your neighbors?
View detail
Firmly silence
Material : I liked the sound of Carbon and exchanged Silencer, but I bought it for silence because the volume is Large and Opposite is bothering you.
What you used before "Petapeta" It was disgusting like I said, but Kore was Large durable.
Volume is also firmly suppressed, sound volume is both ○. However, it is unavoidable that Power will be spoiled.
View detail
Pretty good product
Body is Steel but because it is thin it does not feel its weight and its color is not conspicuous.
Like most of the items in this hand, it sounds like air slitting.
When suffering Helmet, those noises are alleviated considerably and I feel that the volume is falling firmly.
If you attach it in the opposite direction as shown in the photo, Noise like ripping the air can be suppressed somewhat.
Obviously it is not good and it is not recommended way - - -
View detail
I will mute so much.
I bought it for commuting Motorcycle. I got quiet when I put on Baffle, but the dropout was bad and the acceleration got worse. Is it to lower the volume, or to accelerate?.
The product itself has high accuracy, I think that the texture of heat-resistant Black is also good.
View detail
DAYTONA Silencer End Baffle
I installed it on Silencer of custom-made AKRAPOVIC of Slip-on Silencer. I am satisfied without a beeping sound.
It is a Manufacturer that can also relieve the price as well as the price.
View detail
rest assured..
Please be relieved! I'm attaching.
I do not know because it is already in the exit.
A little exhaust sound also became quiet and can be hurried without hesitation when hanging Engine in the garage in future times.
It is not a medium or high speed sacrifice or sole, and it is a feeling that I wonder if a low speed stickiness has gotten out a little.
The only trouble is that you can open the Screw stopper hole at the Silencer exit..
View detail
It is cheap and good.
I heard a little sound and I was concerned about the eyes of the neighbors so I tried putting End Baffle. I feel that the sound is getting smaller with a little sound. It was a correct answer.. View detail