Reviews
Easy to reupholster.
[How is it used?
We received an XR250 in a very dilapidated state and are in the process of restoring the functional parts and exterior.
It has been a long time since the production ended, and there were not many choices of Seat fabrics for different car models, but ALBA had a lineup for XR, which was a big help.
The purpose of use of the vehicle was unclear because it was given to me unexpectedly, but I was told that a junior friend of mine who enjoys playing in the mountains might be able to ride it, so I decided to use it for both daily riding in the city and playing in the mountains. A normal passenger vehicle." I tried to keep the following in mind.
How was your experience with it?
Even though it is a car model specific Seat Cover, is the price slightly higher than ALBA's other Seat Covers? I thought so, but there are not so many choices...
The construction was solid and we were able to finish the seat upholstery without any problems.
The thickness of the fabric seems to be as thick as OEMSeat, so durability can be expected as long as there are no protrusions or blades to cut into the fabric.
Perhaps because the fabric is too new, the surface was slippery during the test ride after the work was completed, but we believe it will settle down as we ride it.
How did it compare to other products?
Nothing of note, good or bad. OEMSeat Cover parallel." It's like
I have no complaints as this is exactly what we were aiming for with this Seat reupholstery job.
[Points to note]
This is an easy task compared to Universal Product's Seat upholstery since the product is three-dimensionally sewn for the car model. In fact, it may be more troublesome to remove the old Seat Cover.
As a personal tensioning method, I first fasten the front and back of the Seat with Tucker, loosening the tension a bit.:Pair (for Left and Right) Quantity at the time of the stakeout of the:Pair (for Left and Right) The tip of the sponge should be stretched evenly so that there are no gaps in the sponge, and the tip of the sponge should be stretched along the seat sponge without wrinkles to obtain a satisfactory result.
Other items that would be helpful
The deciding factor in the purchase
As inexpensive as possible. It just feels normal." We chose the Seat Cover of
It is also important to be able to use the points you have accumulated at Webike.
[How is it used?
We consider that it can be used without any problem from playing in the mountains with friends to day-touring.
【Included Parts:presence or absence】.
A piece of skin for SeatBody, a tandem belt, and an instruction manual with simple tensioning instructions are included in the quantity.:Set
In this case, the Rear Carrier has a handle, so the Tandem belt is not attached.
[ITEMS TO BUY TOGETHER
Tucker (Stapler's slightly larger size) to hold the Seat fabric in place on the Reverse side of the Seat Base, and a shorter core for the legs (because the longer legs would poke through to the surface at the SIDE of the thin Sponge).
If you want to emphasize waterproof performance, you may want to cover the area between the SeatMaterial and the outer skin with Vinyl before applying it. If you do not want the skin to gap while running, it may be better to apply directly to the sponge without using Vinyl, and you should prepare a SiliconCoking agent to apply to the reverse side seam of the SeatMaterial.
Opinions and requests to Manufacturer.
If possible, several color variations would make it easier to match the car body color.
We would appreciate just having a set up for each car model, so please continue to sell as much as possible.
View detail
Fit quite well.
GAG's Seat has a slightly different shape, but it's more than I expected.
Fit.
However, the installation is quite large and strange, as it requires a lot of pulling, fixing, and so on.
Be careful, because if you are not careful, it will wrinkle and you will have to redo it.
View detail
Very good
I reupholstered the seat cover It is quite a hard work
I also put on the Waterproof Cover, which I managed to stretch with the heat gun I did
View detail
Seat has become fashionable
I changed the color when changing torn Seat Outer Cover and tried it fashionably.
Dirt seems to be conspicuous, but this time we choose White ground. It is good to have more choices of Piping colors.
I think that Fitting and constructability are not different from other Seat cover.
Is not it better than Seat of bad name Honda for durability?
View detail
It is thin but leather fabric.
The Draping process was not processed for the concavities and convexities of Seat exclusively for the car model, and the leather dough was just cut appropriately.
Actually the length was short and stopping with Tucker did not match the dimensions, it did not stretch easily, it was strange Large strange.
If you do this, you can make home cheaply for those who bought leather fabrics at home center or like Tokyu Hands. It is truly unbelievable business to say that selling such a thing exclusively for a car model this time.
View detail
Just fit
I bought it for for ADDRESS 110. This time I will not cover the change type, but choose the type to cover. There is also a solid thickness of the fabric itself, Cover size is also Just fit !!
It was a product that changed satisfaction with Large. I think that it is a convincing price in terms of product quality.
View detail
It did with sufficient perseverance using the Dryer, looking at guidance of HP.splendid, if it is alike for the first time and carries out, although wrinkles still remained for a while! Since it is a re-covering sheet only for vehicle type, a thing wi
It did with sufficient perseverance using the Dryer, looking at guidance of HP.splendid, if it is alike for the first time and carries out, although wrinkles still remained for a while! Since it is a re-covering sheet only for
vehicle type, a thing without the necessity of finally cutting remainder also has little time and effort, and is easy.It was good shopping.
View detail
It is not dissatisfied in a product. Those who are using the Rear carrier of the KIJIMA need to keep in mind that it is . The Rear carrier of the KIJIMA should also be using and fixing the hole vacant on the sheet. There is no hole in this sh
It is not dissatisfied in a product.
Those who are using the Rear carrier of the KIJIMA need to keep in mind that it is
.
The Rear carrier of the
KIJIMA should also be using and fixing the hole vacant on the sheet.
There is no hole in this sheet.
If required, there is only making a hole by oneself.
It will be serious if the hole vacated at this time is not processed exactly.
View detail
It is re-covered in a part without a Slit line, a Logo, etc. of a pure sheet, and about about 1 hour of what is inferior in texture if it compares that it is pure, and is a just fit result, and they are goods which can be satisfied very much also in price
It is re-covered in a part without a Slit line, a Logo, etc. of a pure sheet, and about about 1 hour of what is inferior in texture if it compares that it is pure, and is a just fit result, and they are goods which can be satisfied very much also in price.
I thought that color, specification, etc. should just have a Variation more also by
since color was one Type which is 1 color of black.
-- for the time being -- this sheet -- satisfaction and satisfaction!
-- however -- !. Some day, he buys the new article of a pure sheet and it shows it.
but splendid -- a price is carried out -- being やろな -- a cheek.
View detail
although worried about the ability to be given by oneself since the sheet of ZZR250 is quite large -- -- when it did, I, beginners, was also able to re-cover easily! since expense will take about 2 times if I have exchange of done -- -- I th
although worried about the ability to be given by oneself since the sheet of ZZR250 is quite large --
-- when it did, I, beginners, was also able to re-cover easily! since expense will take about 2 times if I have
exchange of done --
-- I think that I will do by myself from now on.
View detail
[Webike Monitor] Since a piece and dirt had been conspicuous, the sheet of the NORMAL purchased. Although the cheap sheet had been purchased before , when it pulled thinly, the stitch was frayed, but the product made from an ALBA is thick a
[Webike Monitor] Since a piece and dirt had been conspicuous, the sheet of the
NORMAL purchased.
Although the cheap sheet had been purchased before
, when it pulled thinly, the stitch was frayed, but the product made from an ALBA is thick and became brave.
Satisfied, although touch that a color tone was somewhat too bright was also merely carried out.
View detail
Since the sheet was torn, sheet re-covering of the alba was carried out. Although it is out of stock and took about one month to dispatch, when dispatch mail was coming, it arrived in two days. Its size was also perfect for goods having been quali
Since the sheet was torn, sheet re-covering of the alba was carried out.
Although it is out of stock and took about one month to dispatch, when dispatch mail was coming, it arrived in two days.
Its size was also perfect for goods having been quality! A result is also good.
It is completely like an original manufacturer's product.
By carrying out free, since it is not pure, construction material differs from a thing without the character of a honda, but an alba is leather with a hard soft leather and authentic positive one.
Individually, although the direction of an alba is liking, and the slit line of black and a top face does not have the silver of trimming, I think that a price and quality are very good.
View detail
It is used for a little cab. Tea was purchased. I consider that it is better to think that it is deep and dark brown rather than the color considered completely unlike this image photograph. but the little cab also became lovely, when the size
It is used for a little cab.
Tea was purchased.
I consider that it is better to think that it is deep and dark brown rather than the color considered completely unlike this image photograph.
but the little cab also became lovely, when the size also came out exactly and was truly united with the grip of beige.
View detail
It waited for about two weeks and arrived at last. It was a just truly! It is a sheet somewhat more rugged than the sheet of TODAY of a basis. It is pleasure about how much it has.
It waited for about two weeks and arrived at last.
It was a just truly! It is a sheet somewhat more rugged than the sheet of TODAY of a basis.
It is pleasure about how much it has.
View detail