Always Stock Multiple Sizes

Since I often do oil changes myself, I always stock multiple sizes of DrainGasket.

DAYTONA's DrainGasket is convenient because it can be purchased in bulk.

I own several Motorcycles, so I have M10 M12 M14 M17. View detail

Always Stock

Since I often do oil changes myself, I always stock multiple sizes of DrainGasket.

DAYTONA's DrainGasket is convenient because it can be purchased in bulk. View detail

I feel safe

In fact, two exchanges of Quantities:1pc. of Gasket, which is supposedly no good. "Use and repeat." I have been doing this with no luck and no oil leaks or seepage.
Good children should be exchanged every time.
It seems that you can choose 300 yen shipping for a stand-alone purchase, but shipping in the 100 yen range would be helpful.
Large usually always buy in bulk with free shipping when purchased at the same time as other items. View detail

Texture that seems to adhere well

Although it is very light, it is not peeled off and seems to fulfill the role of a Gasket. It is hard to say until I use it for a while and check that there is no bleeding, but I think it will not normally leak when tightened with the specified Torque. View detail

Good response to crush

Used on SEROW250, replaced the drain bolt with one from KIJIMA.
Perhaps because it is slightly thicker and softer, it is easy to feel the response of the crushing when it is tightened. View detail

Quantity:1 Set of 10pcs. so it's great for multiple units.

I always replace the drain bolt gasket when I change the oil, and this time I bought it for my NMAX 155.
It's a hassle to buy Single Item every time, so I always use Quantity.:I buy the Set one.
As a 2-unit owner, it is a relief to have lots of Stocks at home. I don't have to worry about when the oil replacement timings come.
There is no problem with the performance of the product.
I have been using it for many years and it has never leaked Oil, so it is very reliable. View detail

Easy to use and no oil leakage

OEM Product was not in stock.
Quantity:1 Set of 10pcs. was purchased for 778 yen, which is about 77 yen per set.
As long as you have Oil and tools, Oil replacement is possible, so the maintenance cost depends on how much you can reduce the cost of consumables for Others.
In this respect, this product seems a little expensive, but its performance is good, so I have a sense of security. View detail

DAYTONA Drain Bolt Gasket 10 Piece Set

I used it for my Z1000R. I used to use OEM parts, but this is the best cost performance. View detail

DAYTONA Drain Bolt Gasket 10 Piece Set

I use it to replace the oil in my Kawasaki 400SS and SUPERShellpa. I used to use OEM parts, but this is the best cost performance. View detail

Used for BURGMAN 200

Since I bought it, I had left it to the store to replace the oil, but since the Campaign period was over, I bought it to do the work myself.
No problem
Cosmetically good. View detail

Required when replacing Oil

Since I quit driving, I have become a motorcyclist, so I change the oil every two months. I always replace the drain bolt every time.
I have never had a leak with my favorite ManufacturerDAYTONA's Drain bolt gasket.
The other company's Gasket, which has only the normal Gold attribute, has bolt marks etc. on it when I remove it for replacement, but this product is Beauty, so I replace it even though I think it is not large enough to be used again.
Quantity because of frequent Oil changes.:I found 1 Set of 10pcs. and bought it immediately. View detail

Quantity because it is a consumable item.:1 Set of 10pcs. would be appreciated.

I forgot to buy a washer every time I changed the oil! So, I use the Quantity:I bought 1 Set of 10pcs.
It is good because it is not a problem and the price is not that high.
The quality is not bad.
I would like to buy it again when it runs out. View detail

For Oil replacement work

DrainGasket is used when changing oil.
I like the way it seems to have better sealability than regular Aluminum material.
This product is sold in bulk, which is good because it is used regularly. View detail

I heard that Toyota OEM is similar to this and bought it.

I bought it because the softness of the Material seems to increase the adhesion between the Oil pan and the Drain, rather than the copper Gasket.
However, I should retighten it after a short run. View detail

Exquisite Size

SUZUKIOEM's Drain bolt gasket is Material:It is a M14 Drain bolt and a kichi kichi in Aluminum.
It is very difficult to remove.
On the other hand, this DAYTONADrain bolt gasket is M14 size, which ensures exquisite clearance and makes replacement extremely easy.
Until now, theQuantity:1 Set of 3pcs. was used, but the Quantity:1 Set of 10pcs. is a little more economical, so I went with this one.
Recommended View detail

Buy in bulk!

I bought M14 Drain bolt gasket in bulk. 3 Motorcycles use M14Size, so I need more quantity than 3pcs.:1 Set of 10pcs. is cheaper because it is used more often. Each Motorcycle has a mileage of 2000Km or every 6 months to replace the oil. View detail

Quantity:1 Set of 10pcs. so you don't have to buy for a while!

[How is it used?
Grom (2015) I purchased this product for Oilfor Replacement of
No oil leakage after replacement and it works fine.
How was your experience with it?
I only change oil about 2-3 times a year, so I don't need that much, but the next time I do, I don't remember what I used to use for large bodies, and it was too much trouble to look it up, so I bought it all at once and stockpiled it.
The container was Vinyl, and the adhesive was so strong that the Vinyl was torn when the package was opened, so I thought it would be good to have a case for storing smallest cases.

As stated in the product description, Material:Since it is an Aluminum DrainWasher, it can easily crack if it is tightened too hard, so be careful with Torque.

How did it compare to other products?
Unlike Copper Washer, it cannot be reused in case of emergency. (Basically, no reuse.) Be careful!
Also, unlike the Copper Washer, it deforms, so I like the feeling that it is being squeezed tightly.

[Points to note]
Included above
Other items that would be helpful
Whether there are Included Parts:/ Items that should be purchased together/Opinions and requests to the Manufacturer
The Torque for tightening grommets is 24N-m, so it is good to have a Torque wrench in that range.
Also, the Bolt diameter is 17mm, so if you have a Wrench that fits it, it will be Large sturdy. View detail

collecting together and buying

I bought them in bulk because they are always needed when replacing Oil. Thank goodness I don't have to go out and buy these little things when the time comes! View detail

Merit available.

We have been using this for years for all of our Motorcycles.

… I don't get frustrated. (LOL)

I used to use Aluminum's Crash washer, but sometimes, depending on how it was crushed, it would be difficult to get it off the Bolt, which was frustrating every time. It is an extra hassle.
It was a tedious process as it is something we do more than 10 times a year.

The amount of crush is small, so it is not difficult to dislodge.
I will never go back to Aluminum single Washer.

No leakage seepage of concern has been confirmed.
Tightly sealed.

However, although it may be a bad way of putting it, if the tangent surface is crumbly due to poor management, the amount of crushing is too small to tell.

Incidentally, it cannot be used over and over again. The amount of crush is small and the coating is peeled off.

As a reminder, if you are tightening with the gnarly hand feeling of Aluminum or Copper… there is no crushing feeling, so recommends that you use a Torque wrench properly.

It's only a Drain Washer, but ….
I think it is a product that can be recommended. View detail

I chose this product because it is a reliable manufacturer.

[How is it used?
I bought it because I do my own Oil changes.

How was your experience with it?
I didn't notice any particular difference from other products.
The surface is processed with something black, so you can feel the manufacturer's ingenuity.
I don't know what effect it has. View detail