- Home
- Product reviews
- Search reviews
Reviews
Fits: HARLEY-DAVIDSON Pump head, HARLEY-DAVIDSON Shovel head, HARLEY-DAVIDSON SOFTAILFamily, HARLEY-DAVIDSON TOURINGFamily, HARLEY-DAVIDSON DYNAFamily
Used in servicing Dyna coil
I bought this because the length of the high-tension cord became insufficient due to the layout change of IGCoil.
It's about 60cm long, so it's probably compatible with most Motorcycles, and will accommodate those who don't want to place the IGCoil near the Engine, and want to place it behind the carburetor.
High-Tension Cord (Plug Cord) If you are not familiar with maintenance, you may want to cut your bike to your desired length, then take it to a motorcycle shop and pay for the work to be done.
If you hit the IGCoil with a hammer, the coil will break in half and become useless.
Then it's better to pay a little Gold and get a reliable press-in.
If you forget to incorporate the Dust Boots before press fitting, you will have to start over (and the Crimp may not be reusable).
If you apply the wrong amount of pressure when fitting the Dust Boots, the Crimp may fall out (if it is pushed in properly, it will not come out).
IGCoil must be fixed in a vise or a jig to tap, otherwise it will be gapped.
When the work is finished, measure the resistance value to confirm that the value is as per the service manual.
If this value is not correct, it is assumed that there is a problem or inadequacy in the core wire processing or Crimp processing.
So, it is essential to measure the resistance before press-fitting and with no code.
View detail