Reviews
Fits: YAMAHA Remote control jog, HONDA PCX125, HONDA PCX125, HONDA Lead 90, HONDA Lead 100, HONDA Lead 50, HONDA Lead 90, HONDA Lead 100, HONDA Lead 50
Price is higher, but Socket is more secure
I purchased this product to integrate KOSO's PowerKit into my ADV150. The quality and functionality are perfectly acceptable, but I wish the price was lower; it is not Wallet-friendly to spend over 2000 yen for a dedicated product that is used only for the clutch lock nut. I think that as long as the functionality is solid, the finish could be rougher.
GlassesType Wrench is cheaper, but the clutch lock nut is only about 5mm thick even though the diameter is large. So I decided to go with Socket because of its high price and peace of mind.
View detail
Fits: HONDA Forza., HONDA Forza., SUZUKI Sky Wave 250, HONDA phase, HONDA fusion, HONDA Forza(MF10), HONDA Forza (MF08), HONDA Forza (MF06), HONDA Forza350, HONDA fusion, HONDA Forza(MF10), HONDA Forza (MF08), HONDA Forza (MF06), HONDA Forza350
It is recommended
Impact wrench mounted in no problem at all
3 KJJOG 's Clutch disassembly unavoidably purchased
When setting again etc etc. I think that there will be opportunities to use again Since it is better to have more tools than less
View detail
You can use
Ducati's Rear tire purchased for center nut removal.
Although it is a shape that Nut is not easily hung thinly, it holds firmly in this product.
View detail
Fits: YAMAHA Remote control jog, HONDA PCX125, HONDA PCX125, HONDA Lead 90, HONDA Lead 100, HONDA Lead 50, HONDA Lead 90, HONDA Lead 100, HONDA Lead 50
After all exclusive Socket.
Until now I had properly tightened with NutWrench, but most of my acquaintance purchased this Socket because it would be better to tighten with Torque wrench.
If you think about that, that's right... Because it is part of Large thing...
By the way, when you loosen it, Impact is nothing!.
View detail
For Clutch nut
I am using it for Scooter's Clutch nut.
Because it is thin Nut carefully with ordinary socket? If it is chamfered, it is easier to tear back, so it is not chamfered
I think that this product is easy to use even on that point.
View detail
Although DUCATI HYPERMOTARD 796 was a cantilever Swing arm, in order to carry out the increase bundle of the big Nut of a Rear wheel, the 46-mm Socket of the DAYTONA was purchased.Although the use of the original product was a thing for clutch pulleys, it
Although DUCATI HYPERMOTARD 796 was a cantilever Swing arm, in order to carry out the increase bundle of the big Nut of a Rear wheel, the 46-mm Socket of the DAYTONA was purchased.Although the use of the original product was a thing for clutch pulleys, it has been satisfactorily used also for the Rear-axle Nut.
Although it was 46 mm and a huge Socket, since it was accurate, it was easy to impose a Torque and it has worked in comfort.It is just going to call this hit product made from a DAYTONA truly.
View detail
Fits: HONDA Forza., HONDA Forza., SUZUKI Sky Wave 250, HONDA phase, HONDA fusion, HONDA Forza(MF10), HONDA Forza (MF08), HONDA Forza (MF06), HONDA Forza350, HONDA fusion, HONDA Forza(MF10), HONDA Forza (MF08), HONDA Forza (MF06), HONDA Forza350
It is a big 41-mm Socket required to exchange the Rear sprocket of DUCATI HYPERMOTARD 796.In tool store, when it became this Size, there were many products offered for Impact wrenches, and the Socket thought that it became deep and was probably hard t
It is a big 41-mm Socket required to exchange the Rear sprocket of DUCATI HYPERMOTARD 796.In
tool store, when it became this Size, there were many products offered for Impact wrenches, and the Socket thought that it became deep and was probably hard to use, and purchased the Socket for the clutch pulleys of a DAYTONA.
Is it because it is a DAYTONA that structure is comparatively [ cheap ] solid?Even if actually used, it was easy to apply power and was an easy-to-use tool.
Although it was a seldom used tool, I thought that he bought a good thing.
View detail
[Webike Monitor] Since he wanted to fasten with a Torque wrench just to bind the Clutch nut of the CYGNUS tight, it purchased. although what is necessary is just to have borrowed when the acquaintance had, since it was rarely a tool to be used, since
[Webike Monitor] Since he wanted to fasten with a Torque wrench just to bind the Clutch nut of the
CYGNUS tight, it purchased.
although what is necessary is just to have borrowed when the acquaintance had, since it was rarely a tool to be used, since this Size did not not much exist, it purchased reluctantly -- what is necessary is just cheap to a slight degree (smile)
View detail
Fits: YAMAHA Remote control jog, HONDA PCX125, HONDA PCX125, HONDA Lead 90, HONDA Lead 100, HONDA Lead 50, HONDA Lead 90, HONDA Lead 100, HONDA Lead 50
[a Webike Monitor] -- -- he gets hooked firmly and the depth is also well easy-to-use exactly. However I do not use frequently, either and think whether you are glad in consumer with obtaining at a little cheaper price.
[a Webike Monitor] --
-- he gets hooked firmly and the depth is also well easy-to-use exactly.
However I do not use frequently, either and think whether you are glad in consumer with obtaining at a little cheaper price.
View detail