Reviews
Role of car model compatibility information
The rear inner fender of my GSX-R1100K was getting old, so I bought a new one from A-TECH.
Since it is FRP, I am very satisfied with the lightness as well as the quality of the texture. Except for one problem….
The size of the Chain Cover is not wide enough for the 160 tire width, and the Chain Cover is gapped on the outside.
I am not thinking of returning it because I have given up on the idea of using it for other vehicles if I can use it because it is an old car now.
However, when I ordered a Front Fender, I received an 18-inches for the first half of the year on a 17-inch K-type. (Processed) What is the meaning of the car model compatibility chart that you select when ordering? I honestly have a feeling that it is not a good idea.
View detail
Delivery time is too long. Other than that, very good!
There is nothing wrong with the product.
The design and texture are both of high quality.
I own two KSRs and both have them installed.
That's how much I like it.
A-TECH's delivery date is too Loose.
Six months on the first Order. Well, this is not an option.
And when the delivery date came, it did not arrive and was extended for two months. I had to put up with this too.
So, they didn't get it again and came back with another 3 month extension.
I was frustrated with the quirkiness, so I talked to WeBig and received it within a week.
I was wondering if A-Tech is making fun of its customers a little bit.
I was even more disgusted.
If you can't deliver, don't take Orders.
In the worst case scenario, it may take up to a year to receive your order.
View detail
Parenthesis is as good as you want it to be.
I decided on Brand based on the impressions. It took a long time to deliver the product, probably because it was handmade. I think anyone can easily install it if there is enough room in the mounting hole. View detail
One point
High-quality product.
The high machining accuracy allows for easy installation.
Rear Fender, so it was not a casual replacement.
I don't think anyone but the person himself would notice, but it is a world of self-satisfaction.
It is solid and durable, so it can be used for a long time.
View detail
A-Tech's Rear Fender
When using the Fender Eliminator, water and mud splashes inevitably occur on the engine side. This part will prevent this from happening. Highly recommended! View detail
6 months
How is it that you can't cancel the order in 6 months? View detail
Undercarriage dirt prevention &Dress-up
Because I bought OHLINS for Rear suspension, I installed it to keep it clean and to make the damage of the splash of the chain oil to the smallest limit.
It works great and makes washing the car a breeze. It also looks fashionable and I have no complaints.
View detail
It's cooler now.
I installed it because I don't have a Fender and I'm worried about mud splash after rain.
I have not driven in the rain since the installation, but I am satisfied because the area around the tire of Rear became cool.
View detail
Installation accuracy is poor.
We waited for about 3 months for the longest part of the chain cover, which was only available in Dry carbon. Finally, we arrived.
The Carbon pattern, the [Color] The shiny condition of the Cleared was great, but the system was bad, according to the shop that asked me to install it. The whole thing is distorted, and the Center doesn't come out & the installation can be done by adjusting the position with Washeretc. He said he managed to get it on.
I wonder how far the distortion effects will go with long-term use...
I can't say it was good considering the delivery time and .
I'm considering what to do.
View detail
Beautiful design and Carbon pattern
Motive for purchasing
Since the VTR250 doesn't have a rear fender, the mud and water repellency of the rear tires can be used to keep them from rolling up and so on will be applied directly to the rear suspension Chain Guard and integrated with the prevention of dirt and dress-up of Suspension I chose the A-TECH product Because I thought it's so important, I decided to use plain weave carbon instead of FRP painted base I tried
About the product
The Fender is long enough to protect it from dirt
Since there was no Fender to begin with, Rear Suspension The dirt protection to the Tire was adequate When installed again, the Fender is designed to cover almost a quarter of the Tire Since it has become, the mud will not splash on the back of Seat as well as Rear Suspension became
It is an integral part of the Chain Guard
Instead of adding a FenderSingle Body, it also serves as a Chain Guard So, a sense of unity around the rear tire will stand out The effect of dress-up by the woven pattern is outstanding In the Guard A-TECH and Logo is also good
The installation of this product is large
To install it, you will need to replace the chain guard with an OEM chain guard, but the exhaust It is necessary to bolt it off from the system side as well In that case, Silencer and Tandem/Exhaust System Bracket are in the way It's hard to get tools in the
Interference with 150Size Tire
This may be an individual difference, but the shape of the Fender is the Quantity:Pair (for Left and Right) Not symmetrical, but the clearance with the Right Side of the Tire was narrower than the OEM At the time of the 140Size Tire, it did not interfere, but when I replaced it with 150Size interfered (TireLeft Side didn't interfere), even with 140Size Some Tire may interfere with this
View detail
The system is yi The system is not so good
Material:Buy FRP
Installed because of the dirty tear shock
(I really wanted to put in a Cores Fender.)
Prep - Coloring [Color] Clear paint is applied and
Machining of long holes for mounting screw holes
There was some interference with the screw of the external exhaust bracket, so it needed to be modified
View detail
I should have had it on from the beginning
[Was there anything that disappointed you?
There is none
Do you have any wishes or improvements you would like to make for the Manufacturer?
Longer chain guards are better than dry carbon
Can you make a Rear cowl of STD shape?
[Do you have any products to compare it to?
None
What made you decide to buy?
Chain Guard is long
How was your experience with it?
Chain oil does not fly into the rear cowl
Was the installation difficult?
No problem at all with the four screws
【Please tell me the installation point and hang】
Rear Fender, you need to be a little careful about the footpeg interference, but if you are careful, you can get the best results There is no need to cure it
However, there is very little clearance around the Bolt for the installation of the Brake hose section So, you need to install it carefully so that you don't crush the screw pile at an angle 。
[Was the Instruction Manual easy to understand?
It was enough to be necessary
[Included Parts:were they on?
Two Sticker White and one Black in Black diamond
[Others]
I've been wearing the company's plain weave Carbon rear fender for about 18 years now
[Color] The pain on the surface is noticeable over the last 4.5 years, probably because I didn't paint Clear, so I'm replacing it I decided to
Color:Unpainted has almost 10 years of life expectancy with no problems, which is about the same as OEM Parts I think
The 12R's Rear Fender can be used in FPR to prevent water from rolling up in rainy weather, etc It's good enough, but the Chain Guard is short and the chain oil flies into the rear cowl I bought the Dry carbon, which has a longer Guard
No distortion like the Chinese Cowl, no need to process the holes, and no need to install like an OEM product I thought it was great to be able to do that
The not-so-selling Motorcycle Parts from 20 years ago remain on Lineup We appreciate the fact that you are doing this for us
If I were to be a little selfish, I think it used to be made of Dry carbon and all cowls were made of Dry carbon Now that there are no OEM parts, I would like to see them revived
View detail
Processing required
Home-painted and mounted on a VTR250
There was no strange distortions, but in my case, the screw holes need to be widened to fit It was
Afterwards, the Instruction Manual is a little confusing because it only describes the bare essentials It's not good
The dirt around the rear suspension has been reduced and I am satisfied with the dress-up effect More places to put Sticker
View detail
I need a little workmanship
Delivery date arrived earlier than 2 months had been.
I bought the FRP, it was okay to keep it glowing, but painted with frosted black.
As everyone comes in contact with Tire as Imple, Washer on Chain side Quantity : 1 Set of 4pcs. Adjusted so much.
I like it..
View detail
Along with Fender Eliminator
I installed it with the same A - TECH Fender Eliminator Kit.
Installation itself is BoltQuantity : It is only 2 pc and 3 Tie Wraps so it was completed in a few minutes.
We can not see glittering or interference at the moment.
Finished in a refreshing Rear.
Material : I bought FRP with Black Gel, but since the finish is originally beautiful and it is not a part that is nervous, Color : It is attached as unpainted.
View detail
Things are good, but I hit it..
180 / 55 / Zr 17 When wearing it rubs the Tire at the position of the exon.
Spaceretc to escape. Enter, it hits the car body.
I plan to find out Chain cover in the future.
It's too bad I'm cool.
View detail
Accuracy is bad
As Carbon lover I first bought Dry carbon.
2 months and 2 months from order to delivery
I came when I forgot.
Tire Left will come into contact with you as it is.
Bite Spacer to the mounting position on the Chain side and pull it to Left.
Although it may be distortion in the production process, this accuracy is a bit disappointing for the price.
We are also considering replacement by another company.
View detail
Fits: SUZUKI GSX1300R GSX1300R HAYABUSA(GSX1300R HAYABUSA)
It is good?
We have adopted the company made by Rear so we also combined Front. It is excellent in Cost performance no matter how much it is! It is also beautiful twill weave and satisfactory quality. Since Bolt was Silver, I replaced it for Black and it became cooler View detail
Fits: SUZUKI GSX1300R GSX1300R HAYABUSA(GSX1300R HAYABUSA)
Good Cost performance
We adopted the company made for Front fender so we also adjusted Rear. The shape is neither possible nor impossible, Carbon is also beautiful and Cost performance is good. Clear Because it is not finished I did CR - 1 Spray. I was able to install with high mounting accuracy and fine adjustment, just as Bolt seemed to float on Silver as well as Front so I changed it to Black. Up to Chain cover This quality and price are pretty good! View detail
Fits: SUZUKI GSX1300R GSX1300R HAYABUSA(GSX1300R HAYABUSA)
Cost performance is good!
We also adopted the company's Front fender so we also adjusted Rear. I think that this quality and price are pretty excellent with regard to the shape that is safe, Chain cover. Clear Because it is not finished I did CR - 1 Spray. Bolt hole also modified slightly (Hole expansion Large degree) And since Bolt is Silver like Front, I changed it to Black. By the way, Size is 4 FrontM 6 × 15, Rear is same SizeQuantity : It is 2pc. I could not find an image that I could easily image on Net View detail