Reviews
periodic replacement
Used as a regular replacement when Brakes air was drained.
The product is a brembo OEM Product, so I was able to use it without any problems.
View detail
periodic replacement
Used as a regular replacement when Brakes air was drained.
The product is a brembo OEM Product, so I was able to use it without any problems.
View detail
Maintenance
Since the rubber was deteriorated during CaliperMaintenance, it was replaced together. Considering the deterioration and periodic replacement, a similar cheaper one may be acceptable. View detail
exchange
It is very helpful to be able to replace with new parts that can be purchased as a Single Item. View detail
At the time of maintenance
Replace at the time of BrakeMaintenance.
Since it is sold as a Single Item, it is helpful to be able to exchange only this part for a new one.
View detail
If you're suspicious, effect.
It may be causing you to chew air.
If you think it is suspicious, please effect it.
View detail
For Repair.
I bought this for Repair because my Breeder was getting licked during air bleeding. I pulled out all the fluid and did the replacement work just for this, but I feel it's a waste of time, so I recommend doing the work in conjunction with replacing other braking systems such as MASTER or Hose.
Also, if you have a chance, you can wrap Seal tape around the Breeder to prevent fluid leaks from the root when you bleed the air.
View detail
Quantity:1pc
I bought this to go with my Brake Caliper Overhaul.
The deciding factor in the purchase
It was easy to see the Size in the picture and the Cap is Quantity.:I bought it because it is Set.
I wanted to use a famous manufacturer's product instead of an OEM one for my super Petit Custom.
[Impressions of using it]
First of all, the normal Quantity:Was 1pc.:I was skeptical because some people wrote "1 Set of 2pcs.:2pc. I bought it with the feeling that it would be good if it contained Set.
I think the problem is that it's not clearly stated on the Page of the product...
I used it on my YamahaTZr50R OEMFront caliper.
I was worried because I didn't know if it would stick, but I'm glad I was able to use it.
I was hoping it would improve the appearance, but the Cap bremboLogo is almost invisible! (Lol)
I was planning to use it for rear caliper, but I couldn't use it because the size is different from front caliper.:1 Set of 2pcs. It was.
On the Rear side, I think I'll quit being so adventurous and just buy an OEM Product.
Products compared
I compared with NISSIN, DAYTONA and OEM Bleeder Bolt. I bought this one because the price is cheaper, it comes with Cap and it is a famous manufacturer.
【Review】
The product is solid and seems to be able to be used safely. Also, the Instruction Manual that came with it is huge and has some language written on it! (Lol)
The Cap was a little white if it was a long term stock item, but well, I think it is no problem if I blow Spray and clean it.
Use of non-warranted Caliper products is at your own risk.
View detail
Quantity:It was 1 Set of 2pcs.
Quantity in images:It's easy to judge it as 1pc.:1 Set of 2pcs.
I bought this 110cc Scooter because I didn't like the way the OEM rusted.
View detail
If you have concerns, you should change them.
If you feel a hint of Rust or Overtorque, replace it.
Unlike the Japanese-made manufacturer's Bleeder Bolt, the cap is a completely removable type, so be careful when the cap is missing and the time has passed.
If the touch goes bad after a while, even if you try to bleed the air out, it may be that a foreign object is biting into the seat surface and causing the damage to come out, so replace it before you hang the torque!
View detail
i am happy with the brembo only
If you install it normally, there may be some oil leakage, so cut the seal tape for the water supply in half I use it It has been working fine View detail
Note the size
I'm using it on the cheapest Caliper with an opposing 4pot 40mm It is a Caliper that came with it from the time I bought it, but because Bleeder Bolt was lame, I had to use it I exchanged it, as the Crab Bleeder Bolt imprints were shown on July 16 of? I measured the width of two sides of the new one with Caliper, and it was 10.95mm, so the width of the new one was 11mm I think you could use a tool, but the brembo is also made by Caliper and MASTER Because of the different types of Bleeder Bolts, it's a good idea to check the size before use View detail