Reviews
Keep the Style
If you keep the Tandem Footpeg attached, I think KIJIMA is better, including ease of use.
But if you want to make it a complete one-seater, I wouldn't hesitate to go with Babyface!
It's not easy to use, but you can't change the way it looks!
I am Large satisfied with my choice!
View detail
It's well made
Installation is very easy, just remove the two Bolts.
The texture of the product itself is very good, and the lock is secure with a snap feeling when locked.
Two keys are provided, including a spare key.
It is very convenient because Key does not need to be left on when locking.
The only thing I would mention about Neck is the price.
Other than that, it is a very good product.
View detail
At any rate, I wanted a Holder.
At first, I wanted to be able to fix the Helmet, so I purchased and installed it.
When I installed it, I noticed that I could not reach the D Ring as it was, so I urgently purchased an extension Holder and used it.
View detail
Used for F4-BRUTALE 750S
I used it on my F4-BRUTALE750, and although it is listed on the manufacturer's website as being compatible with the 10-year or later model, I was able to use it on the 750 by inserting a washer.
Since the mounting position is at the very edge, it would be easier to use if an attachment is used.
View detail
It is difficult to use with S1000 because it is downward facing.
Exclusive Design, but the lock part is facing downward, so it is hard to hang the helmet. Also, to mention a small point, the body of the product adheres to the exterior and is slightly scratched by vibration, etc. If you apply anti-scratch film, it is no problem. KIJIMA's Helmet lock is better in usability. View detail
Necessities
It fits like OEM and the size is small, but I don't have any problem in using it. View detail
Useful Goods
Although the ZX-6R (2012) is currently used only for circuit driving, we have done a thorough breaking-in on public roads in consideration of the load on the engine. (By the way, it is possible to break in the engine on circuits, but it still puts a lot of stress on the engine.)
My ZX-6R was not originally equipped with a helmet lock. I know a person who had his Helmet lock on Mirror stolen when he was taking a break from riding on public roads. "I couldn't run, so I rode my buddy's Motorcycle to buy a Helmet with him." I was told that I had to be very careful. We thought it was best to be cautious, so we installed the BABYFACE racing hook at the same time.
After all, it is necessary for public roads, and the installation compatibility with the racing hook is perfect.
View detail
Looks good, feels good
Looks and feels good. Quality product. Used it together with R&G pillion footrest blanking plates. Nice clean look. 2017 CBR1000RR (SC77) View detail
We had installed this Manufacturer's Exhaust System in the past, so we selected this product with a lot of care.
Purchased for SV650X.
Easy-to-operate, using only the key to unlock the door and pressing the bar to lock it.
The construction is solid and fits discreetly in a good way.
The feel is as I said it would be, but depending on the type of car and Helmet, it may be difficult to use.
The OGKCam y3 on my SV650X is a little It is a little difficult to use.
View detail
Some types of helmets cannot be installed without modification.
ARAI's Jet helmet can be hooked directly to the Ring.
With the full face of the Shorey, you can't hook it directly with the Ring.
The only way to hook it up is to use Wire.
I don't know if it depends on the Manufacturer of the helmet or the type.
Maybe using Wire is the way it should be used....
The product is easy to install.
Even as an amateur, I was able to install it in about 30 minutes.
It would be correct to put it on the Center Stand side.
I installed the Exhaust System on the Right Side.
View detail
Buy because it's less noticeable
I bought this product to make it less noticeable, but it is very difficult to put Helmet on.
I can't lock my helmet quickly when I'm touring, so I'm behind everyone.
I was disappointed because the look and Design is good, but I wanted something more SMART and quick to lock.
View detail
Design is Parenthesis!
It's a Babyface, so it's well made, and the design isn't cheap, it's Parenthesis! View detail
It can be installed in SMART like Standard Product.
Installation was easy
It doesn't interfere with the Pannier case, and it is a refreshing installation impression.
I wish I had installed it sooner.
If a difficulty is said strongly, it is higher than the K company product compared. I am troubled a little here, but there is no doubt that it is easy to use, so it is good if I divide that it became Cost high functionally.
View detail
Just fit.
Fit like an OEM.
It is easy to install and does not interfere with the OEM Pannier case.
The only downside is that it is a bit expensive.
View detail
Cannot be installed without a special wrench
The installation of the screw has no space with a normal Spanner or Wrench, and cannot be tightened. It is forcibly turning by the hand and installing it, but after all it is the plan which buys a new swinging wrench and tightens it. If you don't have a special wrench that can swing the head, it is impossible to install.
Even if it attaches here, it is difficult to install Hook and Small Helmet very much, and it seems that it is better to prepare even if it is a separate warrior.
View detail
You may need a Helmet Anchor.
It looks perfect.
When I tighten with Tandem Footpeg, the hole position accuracy is too good, or it is off, or Bolt does not go into Smooth and hang.
After installation, I tried to put the D Ring of the Helmet through, but it didn't go in.
I managed to get it in at an angle, but the lock pin was bent and couldn't fit in the lock hole, making it useless.
The manufacturer recommended the use of Helmet Anchor as a guide, but
I didn't think to use it that much.
Because I never got to use it.
No performance, features, feel, or cosmetic ratings.
View detail
I don't have a standard helmet lock, so...
YZF-R6 doesn't have a helmet lock as a standard feature, so I have used this product to increase the touring performance.
The lock part is "Co. This is the type that makes the Shaft slide instead of a "2" shape (difficult to image).
"Co. Compared to the "2" shaped ones, it has less rattling and a cleaner look, which matches the Super sports model.
And feel. "Co. It is almost the same as a "2" shaped one.
View detail
It's easy to use!
There are a lot of Helmet locks that are attached to the back of the Tandem stay, but this one is attached to the front of the Tandem stay, so it is very useful.
When I go on a long touring trip, I wear a large-weighted seat bag, but it is easy to use without worrying about getting caught in the large-weighted seat bag because I also wear a fixed belt on the Tandem stay.
View detail
Good stuff
I don't have a helmet holder on my motorcycle so I chose this product This is a part that should be Standard Equipment Why doesn't my motorcycle have a helmet holder?
The key is Yamaha OEM Type, but each MotorcycleManufacturer It would be even better if you could choose separately
View detail
Very effective!
This is a RACINGSpoiler that can be retrofitted to the ARAIRX-7X!
At first, I bought and used the SHOEI X-FOURTEEN
As Marquez was involved in the development of the Helmet, its lightness and stability at high speed are far superior to the old Helmet There was not
I feel like X-FOURTEEN usage is quite high when I actually go touring and such
I used the ARAIHelmet for the first time because I used to be in the motorcycle industry in the past As expected of ARAI, there are many racers (drivers) outside the FOR JAPAN MODEL! The fit feeling (wearing comfort) was several steps better than X-FOURTEEN as I used it There was dissatisfaction with the lift of the HelmetBody and a sense of pressure on the mouth at high speed driving But when I heard about the release of RACINGSpoiler, I immediately made a reservation
The first thing that surprised me when I drove the AquaLine after it arrived at the end of May was that it had been installed The shake of the Helmet is significantly reduced and there is no more lift, so the Helmet is now in the mouth is no longer pressured!
The appearance is close to the mainstream shape of other manufacturers and the impact is I think
It's quite a recommendation for the RX-7XUser
View detail