Helmet in is now comfortable!

Used for Helmet in CYGNUS X Type 2.
I purchased the DAYTONA Helmet-in Pocket to store small items such as documents and gloves, but the Helmet-in has become more comfortable than I expected.
I purchased the M Size and it was just the right size for the back of the CYGNUS Seat. View detail

Convenience (*^^*)

ManufacturerHP recommended L Size, but if you apply the dimensions It's a little big, isn't it?" After much thought and consideration, MSize was chosen.
As a result, this is the Large correct answer!
Is it an OEM Product?" I think I did a Just fit as much as I thought I would ^^^.
Installation is also done by simply screwing on the bolt, so no modification is required!
However, when installed as shown in the installation images on the website and product label, the Rubber sagged and all the items placed inside were scattered inside the Helmet in while driving.
Therefore, it is recommended that the Rubber be pulled back and the Hook be attached in the opposite direction of the Manufacturer's installation image!
Also, the attached tapping screw is too thin and short.
I think it could have been on One size already. View detail

Installed on SWISH

I installed it under the Seat of SWISH as a document holder.
If you don't want to damage it at all, you should buy Double-sided Tape by yourself.
If the screw is screwed in by force, the resin behind the seat will become a burden though it is soft, so it is better to make a hole with 2mm Pin vise before threading.
Just because it will be placed on the ceiling of the place where Helmet is placed, the lid might not be able to close if Helmet is put in.
I have a Size XLHelmet and the lid doesn't close originally so it doesn't matter. View detail

Helmet inSpace Refreshing

Scooter's Helmet in, tends to get messed up with liability, voluntary insurance, and vehicle inspection.
But thanks to this, my papers are now neatly organized in Paris.

However, on my motorcycle, the installation was not so good because there is no HelmetSpace? (recess on the Seat side) like the product image.

The quality is worth the price, but it's more than worth the price.

As a side note, there is a pocket with a zipper, so you can use it for not only a Scooter but also a regular motorcycle seat to hold your documents. View detail

Utilize Dead Space to improve usability!

Scooter's Helmet in Extension Items
Utilize Dead Space to improve usability!

Good point? The good thing is that you can use the dead space in Helmet in effectively!
Do you make use of the back of the Helmet in, the Seat side? Do you leave your entire luggage tucked deep in the Helmet in? Where's Towel, where's the paperwork when you need it? It's a must-have item for those of you who are a bit of a goofball
Helmet-in with a hook on the back of the Helmet in with a DrillScrew Just by hooking up the Pocket, the space that used to be floating in the air becomes a storage space! You can tuck your papers in here, or keep Towel and Wax in here for light cleaning, or you can use Infinite Large

Good point? Small size with 2 pockets! And for one thing, Fastener too!
This is a modest point:one pocket with a zipper and an elastic gusset It has a 2-pocket configuration with a Mesh pocket with Rubber
I put my registration documents and voluntary insurance policy in the pocket with Zipper I put my Towel in the outer Mesh pocket Mesh pocket is a good place to store Towel, especially on rainy days when you have to wipe Seats and get them wet The pocket is quite a nice point

What's not so great:I had to make a hole in the OEMSeat base
As mentioned above, you will need to drill a hole in the Seat base with a DrillScrew OEMParts is quite resistant to OEM moms and those who want to keep it as clean as possible It might be a product that is Personally, I don't care too much about it because it's a process to the reverse side of the Seat base It was View detail

Good

Excellent Fit perfect. My PCX125 Arranges documents, gloves, and more comfortably. I recommend Fine It went perfectly. My PCX125 Conveniently arrange documents, gloves, etc. Recommend translated by Google Translator View detail

Easy to use

BW'S (SA44J) It attached to.

If you are looking for documents to be inserted,
I found this item.

Seat The Screw stopper is required behind,
It is lange and strange that there is.

Because prices are also cheap and easy to put out hands,
I'd like to install it on the other side of the bus and the back of the Rear box. View detail

"Batch gou" Cooperate with data collection to improve IME conversion accuracy

I installed it in Axis Treat.
Small articles - I think I will store things I do not want to add much heat.
Material is soft and good feeling.
After opening the pilot hole and fastening Screw it was batch gou. View detail

Various depending on the ingenuity

Although it is different from the assumed usage,
Rear box (Home center box) I installed it on the back of the lid.

It was satisfied that the dead space was present in plain form was resolved.
I think that it seems that you can use it variously depending on the ingenuity.

I feel that ease-of-use will spread if there is a product of Magic tape stopper. View detail

Cospa best

Purchased to CYGNUS 4 type
Size is M

It was just a good size

Installation is only done with Screw
Since considerable power is necessary, remove Seat
I recommend to work in a flat place

Storage capacity is also good View detail

Even if it is not Just fit OK

HONDA made by TWR / PCX125 / 150 seat for 150 / Tuck roll - Attached to BKStitch.
M Size is a little Large, but there is no problem.
From the original seat, since SHOEI J-Cruise did not fit in Helmet in, Helmet puts it in the Top box and Seat puts rain gear and luggage net etc. under Seat.
PCX's Seat stops at 90-degrees and 45 degrees, but it is still hard to use, so I think that it is better to use the Top box for Main.
Thanks to Helmet-in Pocket, I could organize Helmet in.
To detach it, remove Seat and use electric drill to immediately complete the trip. View detail

Helmet in was able to organize.

Self-liability insurance letter and things to put CROSS for Seat wiping after rain
As I was looking for, I bought this product with the reputation CYGNUS Exactly.
Because I wanted to attach securely, I removed Seat and did it.
We were able to organize within Helmet in just Exactly. it's recommended. View detail

Recommendation for Scooter.

【What made you decide the purchase?】 It seems to be convenient for organizing the inside of Helmet in.
【How was it actually used?】 I refreshed as I thought.
【Was it difficult to install? (Hard parts case)】 I installed it with Driver but the operation time will change at all if there is an electric Driver.
【Please tell me the point of installation and hang (in the case of Hard parts)】 In the case of CYGNUS, it is better to be careful not to hit Helmet because Helmet in is not deep. Because it will be a problem if Seat will not close.
【Fit feeling and height when wearing - Please tell me the weight etc (Apparel case) 】Any
[Is there anything I was disappointed about?] Not at all.
【Hope for Manufacturer - Please let me know if there are any improvement points】 I think white is a matter even if there are several colors.
【Have you compared items?】 None.
[Others] Helmet in Scooter is very useful. You can use Scooter's privileges effectively.
View detail

It is cheap and very convenient!

I attached it to CYGNUSx, se 12 j. I think that it is Exclusive Design as much as Exactly! It has been refreshing so far that I could store what I had thrown into Helmet in.
The bad point is that the Zipper part etc. is the price with the price but if it is used normally it is a problem. I do not mind there because it is COSPA. View detail

Used for SEA 6J

We adopted it for Bw's125.
Helmet in there was no document placement so it is easy to use Large changeable convenience.
Although it seems that Screw is attached and originally fixed with that,
On Bw 's 125 there were something like Hook at the back of Seat behind Seat and I could not fix it because I could fix it enough enough to put it there.
Because heavy things can not be put in first, even this is fixed enough.
The price is also cheap, and it is a Recommendation by all means. View detail

S Size may have been good

ADDRESS110 (CE47A) I bought it for Helmet in.

Mandatory liability claims etc etc. If you are looking for a good place to put documents of
Discover this!
Exactly "The hand reaches the itchy place" I think that it is a product.

Even if it is carefully attached, it can only be fixed with Tapping screw, so it will be completed in about 20 minutes.
It's just right to put documents and Small items that are easy to lose.

It might be good also for S Size for Helmet in this Motorcycle.
That's why I purchased M Size is not too large, so I have no problem with it separately. View detail

Convenient!

I never knew that such an item existed.

I felt daily that the inside of Helmet in was cluttered and somehow, but I discovered this product as I had given up trying nothing..

It is cheap and convenient, there is nothing to say.

By the way, amatea ○ ○ I bought it, but of course we are Bae Wei. View detail

I added it to Axis Treat

I installed it in Axis Treat.

Honda TACT I was riding in the past (AF16) In the Front there was a Pocket that can be locked, so there are documents etc. Although I put in, it was not in Axis Treat, I put it under Seat.

But I was looking for something nice to move and bend inside, but I was looking for YAMAHAOEM
→ http : / / www. ysgear. co. jp / Products / Detail / top / model / 1175 / item / Q5KYSK080T02
What a 2,700!

I thought that it was too high, I found this product with web! Ke.

Size is S for 50 ccClass and M Size for 125 ccClass.
And three more types of L for Class.
Of course I ordered Size.

Installation is done by fixing the outer circumference Rubber string around the Pocket with 6 enclosed Clamp and Tapping screws at 6 positions.

However, since the thickness of the Tapping screw is pretty, it will be quite hard to keep it as it is.
For those who have it, it is easier to work from opening a pilot with Drill from 1 mm to 2 mm.

In the case of Axis Treat top (With Seat raised) I felt a little loose, but there is no problem in practical use.
Mesh pocket felt like putting in a little Small thing, so I let the document to the Pocket with Main's Fastener.

Between Body and Seat can also be used as a storage space, it seems that you can also store Rain jacket if it is folded into Beauty thanks to the Rubber string.

Of course, I think that it will be difficult to store Helmet if I insert a large item.
In my case Helmet is stored in the Top case so there is no problem.

It is nice to be able to keep things rolling under Seat in Beauty.

Regarding the Rubber string, although I am afraid of deterioration, I think that it can be bought and exchanged at a handicraft shop, so I think that there is no problem. View detail

Easy to use

I folded and attached the end to the back of Seat of ZrX

Well, it comes handy as things enter

I have a document system but I am too familiar with Seat too much Sometimes where I did I wanna see? Lol
Am I the only one ?! □ ?;) View detail

Easy to use

PCX (JF28) It attached to. Size is M Size. Tapping did not dig into mounting easily, and I used an electric Driver. I decided a position or something. I am putting documents and Towel etc.. I think that it is convenient.. View detail