Plate to make OEMfootpeg into Rear Sets easily.

[How is it used?
Traveling:Touring, mountain passes
Period of use:About 5 years or so
Position used:Most Back, Most Up position

Was the one you received as per Image?
Just like the image. The quality of the product was good enough to satisfy me, and the details of the construction were good, just like Takegawa.

Was the installation difficult?
Remove the OEM footpeg and install this product.
After that, the OEM footpeg must be installed on the product. This is a slightly time-consuming process.
Also, if you use it in the most backward and upward positions, you need to use a universal bracket for the reserve tank of the rear master, and move the mounting position backward, otherwise the hose bend will be too tight. Therefore, it is necessary to adjust it.

How was your experience with it?
It was just a plain aluminum plate part, but it was a part that did an incredibly good job.
I didn't feel comfortable with the OEM position, but after installing this product, the position was much easier to attack. (Position for easy footpeg input and good holdability) I'm glad I introduced the Large variant. I was glad to have introduced the Large change.
The rigidity was solid, and it was not squishy and unmanageable. It was not squishy and helpless at all.
The accuracy was good and the OEM footpeg could not be installed. There was no such problem.
It is definitely better to introduce a set back plate like this product rather than the very cheap Chukka Rear Sets from a certain tropical rainforest.

[Included Parts:were they on?
Yes. Please refer to the product description.

[Was there anything that disappointed you?
None

[Points and hangs of installation/Items to buy together].
The key point for installation is to move the rear master reserve tank backward when installing the unit at the most back or most up position.
If left in the OEM position, the Hose bend will be too tight and Fluid flow will be obstructed, leading to BrakeTrouble.

Items that should be purchased together are Universal Bracket with longitudinal dimension 150mm to 200mm Φ7 or Φ8 perforated to solve the above.
Bolt, Nut, and Spacer in M6.
Footpeg(No Rubber, Material:Aluminum), it is almost possible to make it into Rear Sets.

A medium-strength screw locker to prevent the bolt that holds the footpeg from falling off or loosening. (Locktite, THREEBOND, GACHI Screw, etc. anaerobic adhesives) It is recommended to purchase this product because it is good to use it together with View detail

When the Back step was looked for, the goods here were found and it purchased to the trial. Even when it was normal, it was comfortable, but the Position became very easy by attaching this.Other portions are not tried although the Position is

When the Back step was looked for, the goods here were found and it purchased to the trial.

Even when it was normal, it was comfortable, but the Position became very easy by attaching this.Other portions are not tried although the
Position is set up in No. 1 back.It was good to use the goods here although he thought that he would purchase a comparatively cheap Back step at the auction etc. View detail

Although it was a slight change, it became a satisfying Position in the bottom adjustment hole.Since it is still a pure Rubber Step, comfortable nature also remains as it is.Since it shifts out of a Plate part as a secondary effect, it becomes easy to gri

Although it was a slight change, it became a satisfying Position in the bottom adjustment hole.Since it is still a pure Rubber Step, comfortable nature also remains as it is.Since it shifts out of a Plate part as a secondary effect, it becomes easy to grip.In addition, it was good for a color to have been a Gun meta.
However, the Hose which leads to a Reserve of a Brake on account of a Space is likely to break.The adjustment limit was reached when lowering the Brake pedal, although there was also
individual difference.It is what to do, when using other holes... View detail

Although he wanted to change the Position appropriate for a pure NAKED, since the Back step was expensive, it purchased this product. I think that the durability of a Change rod is what is higher than other company since the Change rod is attached un

Although he wanted to change the Position appropriate for a pure NAKED, since the Back step was expensive, it purchased this product. I think that the durability of a Change rod is what is higher than
other company since the Change rod is attached unlike the goods of
other company.
Even if it lowers a Brake pedal to the maximum again, are written to be uncomfortable by some people, but dissatisfaction in particular does not have me. By equipping with this product after
, it becomes markedly easy to carry out a Knee grip, and the maneuverability drivability of the Motorcycle went up!

Since it has equipped with the pure Muffler when it is me, the Position can choose only three among 1, 2, and 3, but. It is right just by Position 3. Since he thinks that the burden is placed very well on the Hose connected with a Reserve tank although a Brake does not drag the
Rear brake, he puts in a Stay later and it makes it like to place a burden on a Hose.

Since there was no telling how many durability of a Plate have since it is this price, I was allowed to be referred to as *4, but I think that they are good goods. View detail

[a Webike Monitor] -- although the Riding position is slightly ... with a high Back step -- it is recommended at such a person! Although the same Parts has come out also from other company, and a Position. with

[a Webike Monitor] -- although the
Riding position is slightly ...
with a high Back step
-- it is recommended at such a person! Although the same Parts has come out also from
other company,

and a Position.
with cheap
and price to which the not
and an extended Parts but Change rod which can be chosen from three are attached
-- we recommend you the goods here at this point whose number is three! View detail