Reviews
Good Controllability
Unlike the OEM Product, you can feel the braking force as much as you grip it. View detail
Satisfied
As others have mentioned, it works Linearly.
It works as long as you step on it, and it is easy to lightly step on Control.
It is a little expensive at mass retailers, but I am glad that I can buy it at a very reasonable price on the webike.
View detail
safety
DUCATI SCRAMBLER2020 Rear Wheel Brake
The original pad is from bremboOEM, but we replaced it with this one.
When I first started using it, I was worried that it wouldn't work…? But as I let it sink in, it worked just as described. It works as long as you hold it/step on it." I feel that it is more Mild than OEM.
I think it is suitable for running like adjusting the speed with the rear brake while keeping the RPM low with a tight corner.
As for durability, I don't know since I've only just started using it.
View detail
Easy to use with OEM Fee Ring
Some pads work with a Snap at the moment of grip, but a pad that works too hard is nerve-wracking when you want to slow down while dragging the Brake a little.
The Pad here has a Fee Ring that is close to OEM and is gentle at the beginning of the grip, making it easy to control the Brake.
Of course, it works well if you hold it firmly.
Breaking has become more enjoyable after adding this pad because it works consistently in a sensible speed range, regardless of weather conditions.
View detail
Fits: SUZUKI SV650XA ABS, SUZUKI SV650A, SUZUKI GSX250S Cobra, KAWASAKI ZZ-R400, KAWASAKI ZXR400R, KAWASAKI ZXR400, KAWASAKI Ninja ZX-7R, KAWASAKI Ninja ZX-7, KAWASAKI Ninja ZX-11, KAWASAKI GPZ900R, KAWASAKI GPZ900R
A little expensive, but yes.
I found the controls to be quite Linear, as did others.
It is a little expensive, but the OEM is also reasonable, so I think this is the one I would buy….
However, Package is not Fashion.
but does not affect performance at all.
View detail
Fits: SUZUKI SV650A, SUZUKI SV650, SUZUKI SFV650A Gladius ABS, SUZUKI SFV650 Gladius, SUZUKI Gladius 400 ABS, SUZUKI GW250Z, SUZUKI GW250F, SUZUKI GSX250RZ, SUZUKI GW250 Inazuma, SUZUKI GSR250X, SUZUKI GSX250R, SUZUKI GSR250R, SUZUKI GSR250S, SUZUKI GSR250, SUZUKI GSR250F, KAWASAKI Z900, KAWASAKI Z900, KAWASAKI Z800e, KAWASAKI Z800, KAWASAKI Z800e
I think it's good
Even right after the changeover, I am getting bites.
It works better than OEM and has excellent linear feel.
The durability is still uncertain, but if the price is the same as OEM and Large, this is the better choice.
P.S. The Silencer is in the way of replacing the SV650X Rear!
View detail
Fits: BMW R1200GS Adventure, BMW R1200GS Adventure Special Edition, BMW K1600GTL, BMW K1600GT, BMW K1600GT Sport, BMW K1600GT Bagger, BMW K1600GT, BMW K1600GT, BMW K1600B, BMW K1600 Grand America, BMW HP2 Enduro, BMW HP2 Enduro, BMW HP2 Enduro, BMW HP2 Enduro, BMW HP2 Enduro, BMW HP2 Enduro, BMW HP2 1200 RS-FL, BMW G650GS Sertao, BMW G650GS ABS, BMW G650 Xcountry
Was good
OEM products are expensive and hard to find, so this is a good substitute.
neither good nor bad
not at all inferior to
View detail
Fits: YAMAHA Serow 250, YAMAHA FZN250, YAMAHA FZF250, YAMAHA DT200WR, YAMAHA DT125RE, SUZUKI TS200R, SUZUKI TS125R, SUZUKI RMX250, SUZUKI RM250, SUZUKI RM125, SUZUKI DR650SE, SUZUKI DR350SE, SUZUKI DR350SE, SUZUKI DR350S, SUZUKI DR350, SUZUKI DR250SHE, SUZUKI DR250SH, SUZUKI DR250SE, SUZUKI DR250S, SUZUKI DR250E
Touch is also gentle and works well.
[How is it used?
During BrakeMaintenance on SEROW250 I might try non-DAYTONA Brake Pads once in a while." I bought Vesla's Sintered pad on a whim.
When the pad was replaced, the brake caliper was cleaned and each part was greased up, the brake fluid was replaced, and the pad was used after maintenance was performed in an amateur's way.
Was the one you received as per Image?
I was used to seeing Large Residential DAYTONA and Vesla at the motorcycle supply store Brake Corner, but I always bought the reasonably priced DAYTONA pad.
See Webike's revue. "It'll last. I bought it this time because several people had written about it.
How was your experience with it?
The vehicle equipped with SEROW250 is "Street ride" 30%, "Playing in the mountains." 50%, "Touring" There are very few runs where hard breaking is used for long periods of time, such as 20% of the time.
It is not a type of brake that works with a powerful force from the beginning of gripping! This is not a type that works with a "thump" from the beginning, but a type that starts up braking in proportion to the force with which the lever is held, a characteristic that makes it easy to control.
I don't know if I can recommend Brake's Fee Ring to everyone, as everyone has their own preferences, but it was a great fit for me.
In other reviewers' revue. And it holds up well." I have no need to ask for more in my motorcycle life, and it is a product with sufficient performance.
[Points to note]
Since this is an important component that slows down the vehicle, please be very careful not to get grease or Oiletc. oil on the contact surfaces of the pad and disc rotors during installation.
Naturally, the replacement work must be precise.
How did it compare to other products?
It may not be as good as a very expensive product, but it is a solid product that is nothing compared to other products in the same price range.
Other items that would be helpful
Point and hang of installation
If you are replacing only the pad, there seems to be no problem if you work with the above mentioned points in mind.
However, if the brake pads have been used until it is time to replace them, it would be safer to remove brake dust from the caliper, clean the brake pistons, and replace the brake fluid, and consider doing the work in total.
BrakeTrouble can be life-threatening and large, so if you are not sure about the work, do not overdo it! "PRO" Ask the person in charge of the project.
[ITEMS TO BUY TOGETHER
As mentioned above, if you are working with Brake-related Total, you should purchase Brake fluid, PartsCleaner, and various types of Grease to make your work go smoothly.
[Opinions and requests to Manufacturer
Please continue to provide a wide variety of lineups.
View detail
Fits: SUZUKI VZR1800Z Boulevard M109RZ SE, SUZUKI VZR1800Z Boulevard M109R Limited Edition, SUZUKI VZR1800Z Boulevard M109R Limited Edition, SUZUKI VZR1800BZ M109R B.O.S.S., SUZUKI VZR1800N Boulevard M109R2, SUZUKI VZR1800B Boulevard M109R B.O.S.S., SUZUKI VZR1800 Boulevard M109R, SUZUKI V-Strom1000 ABS, SUZUKI V-Strom 1000 XT, SUZUKI V-Strom 1000 Adventure, SUZUKI V-Strom 1000 Adventure, SUZUKI V-Strom 1000 Adventure, SUZUKI GSX1300RZ Hayabusa Ltd, SUZUKI GSX1300R Hayabusa, SUZUKI GSX-R750, SUZUKI GSX-R750, SUZUKI GSX-R600, SUZUKI GSX-R600, SUZUKI GSX-R1000, SUZUKI GSX-R1000
It works well and is very straightforward and Linear.
DL1000 V-STROM1000ABS 2014 replaced at the same time as Rear.
The effect is good. It is very straightforward and linear, which is exactly what I think the seniors on the Net have said.
The OEM Front image has a gradual start and a sharp peak in the middle, but this image is able to decelerate as intended even if the breaking is early or late. I decided on the Large Image, but the shop recommended the Vesla Image, and I thought Large was the right choice.
Fuji the day after installation, and there was no discomfort at all, as if I had been using it for a long time. Breaking is a safe bet.
I don't know about durability, but I'll give it a 5 because of the good Net rating.
I would definitely recommend it to my friends if they ask. (Rear is also replaced at the same time, so VD-359JL has the same Rear impression written on it.)
View detail
Fits: SUZUKI V-Strom1000 ABS, SUZUKI V-Strom 1000 XT, SUZUKI GSX1300RZ Hayabusa Ltd, SUZUKI GSX1300RZ Hayabusa Ltd ABS, SUZUKI GSX1300RA Hayabusa ABS, SUZUKI GSX1300R Hayabusa, SUZUKI GSX1300R Hayabusa, SUZUKI GSX1300BKA B-King ABS, SUZUKI GSX1300BK B-King, SUZUKI GSX-R750, SUZUKI GSX-R750, SUZUKI GSX-R600, SUZUKI GSX-R600, SUZUKI GSX-R1000
Breaking is assured with Linear listening level.
DL1000 V-STROM1000ABS 2014 replaced at the same time as Front.
The effect is good. It is very straightforward and linear, which is exactly what I think the seniors on the Net have said.
I personally appreciate the OEM's Rear, which I felt was not as effective as I would have liked it to be, but in situations such as attitude control during cornering, it does what is intended.
The Shop recommended Besra, and I thought Large was the right choice.
Fuji the day after installation, and there was no discomfort at all, as if I had been using it for a long time. Breaking is a safe bet.
I don't know about durability, but I'll give it a 5 because of the good Net rating.
I would definitely recommend it to my friends if they ask.
View detail
Fits: YAMAHA YZF-R15, YAMAHA Tricity 125, YAMAHA Tricity 125 ABS, YAMAHA Sniper150, YAMAHA M-Slaz, YAMAHA JUPITER MX KING, YAMAHA EXCITER 150, YAMAHA JUPITER MX, HONDA Z125MA Monkey ABS, HONDA Z125M Monkey, HONDA XL125V Varadero, HONDA XL125V Varadero, HONDA CBR125RW, HONDA CBR150R, HONDA CBR125RS, HONDA CBR125R, YAMAHA Tricity155, YAMAHA Tricity155
Rear brake of exciter
It was used on the Rear brake of the exciter.
I thought it would be difficult to find compatible Brake Pads for a vehicle with so few balls.
Since the car was registered as a compatible model, we had no hesitation in purchasing it.
I use it for commuting and it works well enough and is easy to Control.
View detail
Fits: TRIUMPH Legend TT, TRIUMPH Bonneville T214, TRIUMPH Bonneville T120 Black, TRIUMPH Bonneville T120, TRIUMPH Bonneville T100, TRIUMPH Bonneville T100, TRIUMPH Bonneville T100, TRIUMPH Bonneville T100, TRIUMPH Bonneville Street Cup, TRIUMPH Bonneville Sprit, TRIUMPH Bonneville SE, TRIUMPH Bonneville SE, TRIUMPH Bonneville Newchurch, TRIUMPH Bonneville Bobber, TRIUMPH Bonneville Black, TRIUMPH Bonneville America, TRIUMPH Bonneville 800, TRIUMPH Bonneville, TRIUMPH Bonneville, TRIUMPH Bonneville
Used for CBR250RR MC22
[How is it used?
I recently installed it on a CBR250RRMC22 Front.
No actual driving has been done.
How was your experience with it?
Installation was fine. I can't say for sure since I haven't done any actual driving, but I didn't think there was anything wrong with the equipment.
I'm hoping to see how long it will last.
How did it compare to other products?
The price is inexpensive.
[Points to note]
Please check the compatibility of Front and Rear.
View detail
Fits: SUZUKI SV650XA ABS, SUZUKI SV650A, SUZUKI GSX250S Cobra, KAWASAKI ZZ-R400, KAWASAKI ZXR400R, KAWASAKI ZXR400, KAWASAKI Ninja ZX-7R, KAWASAKI Ninja ZX-7, KAWASAKI Ninja ZX-11, KAWASAKI GPZ900R, KAWASAKI GPZ900R
Subtle Touchable
The way the Sintered Metal works is in line with my taste, so I can switch it off and on the road.
Touch is Psycho.
View detail
Fits: YAMAHA Zeal (i.e. a Zealot), YAMAHA XVZ1300TFS Venture MM Limited Edition, YAMAHA XVZ1300TFS Royal Star Venture S, YAMAHA XVZ1300TFS Royal Star Midnight Venture, YAMAHA XVZ1300TFM Royal Star Midnight Venture, YAMAHA XVZ1300TF Venture Star, YAMAHA XVZ1300TF Royal Star Venture, YAMAHA XVZ1300CTS Royal Star Tour Deluxe S, YAMAHA XVZ1300CTM Royal Star Tour Deluxe, YAMAHA XVZ1300CT Royal Star Tour Deluxe, YAMAHA XVS950XR-A BOLT, YAMAHA XVS950CUD-A BOLT, YAMAHA XVS950CUD-A BOLT, YAMAHA XVS950CUD-A BOLT, YAMAHA XVS950CU-A BOLT, YAMAHA XVS950CU-A BOLT, YAMAHA XVS950CU-A BOLT, YAMAHA XVS950CU BOLT-R(A) SPEC ABS, YAMAHA XVS950CU BOLT-R SPEC, YAMAHA XVS950CU BOLT-C(A) SPEC ABS
Great durability.
I have no complaints at all about the efficacy.
I wondered what I had been using RedPad for all this time.
It has a terrific high longevity, as much as I can say.
I personally choose this one for my SR.
Almost every day because it was also a commuter issue.
I used it for more than 20 km.
After about 2 years of use, I installed it myself and also
I was worried because it didn't decrease too much, so I went to the Shop.
I had it replaced, but there was 4-5mm left.
Moreover, the Baxter was changed and the Brake Arm remained the same.
The Rear brake was almost 100% used as a decoration.
This is despite the fact that it was a Front brake request.
I'd rather just replace it with RedPad for a little bit.
It is better to use this one even if it is a little expensive.
It is by far the most cost-effective.
Crying is none for me.
View detail
Fits: KAWASAKI Z750FX, KAWASAKI Z550, KAWASAKI Z400FX, KAWASAKI Z1R, KAWASAKI Z1R, KAWASAKI Z1000MKII, KAWASAKI Z1000, KAWASAKI KZ1300, KAWASAKI KZ1000 MK II, KAWASAKI KZ1300, KAWASAKI KZ1000, KAWASAKI KZ1000, KAWASAKI KZ1000, KAWASAKI KZ1000 Police, KAWASAKI KZ1000 ST
Mounted on Kawasaki KZ1000 MK-II
I used it on the rear brake of my Kawasaki KZ1000 MK2.
More effective than OEM. JAPAN products are safe. Costa is the best!
View detail
Fits: HONDA XR440R, HONDA XR440R, HONDA XR400SM Motard, HONDA XR400RT Acier, GASGAS MC250, GASGAS MC125, GASGAS FSE450, GASGAS EC515, GASGAS EC450, GASGAS EC300, GASGAS EC300, GASGAS EC300, GASGAS EC250, GASGAS EC200, GASGAS EC125, GASGAS EC125, GASGAS 450 Fse, BETA SM450, BETA SM400, BETA RS450
Does it feel like the back of the OEMPad works twice as well?
[How is it used?
I have used the vehicle for 3 years and 10,000 km since purchase, and thought that the pad installed at the time of purchase must be worn out by now, so I replaced it.
It was rumored to work well in certain places, so I decided to go with this Pad, although it is a bit expensive! 。
How was your experience with it?
The initial Touch is what? The initial Touch is so gradual that you may think, "What is that? It is not suitable for those who are looking for an effect that starts up quickly in the early stage.
However, as you tighten your grip on it, it starts to work.
I used to Brake with two fingers on my previous Pad, but now I can do my normal deceleration with a slightly stronger grip, even with just one index finger.
However, it requires Stroke to work (because it is OEMHose?). So, it takes more grip strength than expected.
How did it compare to other products?
The pad installed at the time of purchase was presumably HYPERSintered by DAYTONA.
The braking force was satisfactory enough, but the effectiveness has been further improved compared to that.
Durability will be verified in the future.
[Points to note]
When replacing the pad, it is better to clean the caliper and grease up the slide pins.
The wear and tear of the Rotor must also be checked.
View detail
Fits: YAMAHA FZ6 S2 ABS, YAMAHA FZ6 S2 ABS, YAMAHA FZ6 S2, YAMAHA FZ6 Fazer-S2 ABS, YAMAHA FZ6 Fazer-S2, YAMAHA FZ6 Fazer, YAMAHA FZ6, YAMAHA FZ1, YAMAHA FZ1, YAMAHA FAZER8 ABS, YAMAHA FAZER8, SUZUKI V-Strom Traveller, SUZUKI V-Strom 650XT ABS, SUZUKI V-Strom 650 XT ABS, SUZUKI V-Strom 650 ABS Adventure, SUZUKI V-Strom 1000 Adventure, SUZUKI SV650SA, SUZUKI SV650SA, SUZUKI SV650S, SUZUKI SV650A
It works well.
[How is it used?
Used for HORNET 900
How was your experience with it?
It worked well enough.
I prefer DAYTONA's Red Pad because it doesn't work unless you step on it a lot.
Front has Metallica's Normal specifications.
https://www.webike.net/sd/1091373/
I like the balance of the Front and Rear effects.
View detail
Fits: bimota DBX, bimota DBX 1100, YAMAHA YZF-R125, YAMAHA YBA125 Enticer, YAMAHA XT660Z Tenere / ABS, YAMAHA X-MAX, YAMAHA X-MAX 250 / ABS, YAMAHA X-MAX 250 / ABS, YAMAHA Versity., YAMAHA Versity., YAMAHA Versity., YAMAHA TT600RE, YAMAHA TT600R, YAMAHA TT600R, YAMAHA TT600E, YAMAHA TT600E, YAMAHA TT600 Acier, YAMAHA Maxster., YAMAHA Maxster., YAMAHA Majesty 125
The compatibility chart is wrong.
I searched for a product that fits BMW K1300S, and VD-947JL was displayed, so I bought it. The part number of OEM pad for K1200S, K1200R, K1300S, and K1300R is the same, and the part number for K1300S is also the same. The part number of OEM pad for K1200S, K1200R, K1300S and K1300R is the same, so I think you should use ZV-VD947/2JL which has different thickness inside and outside as well as OEM pad.
I am satisfied with the performance of the Pad, but this will shorten its life.
View detail
Fits: BUELL XB9SX Lightning, BUELL XB9SX Lightning, BUELL XB9SX Lightning CityX, BUELL XB9S Lightning, BUELL XB9R Firebolt, BUELL XB12XT Ulysses, BUELL XB12X Ulysses, BUELL XB12STT Lightning, BUELL XB12SS Lightning Long, BUELL XB12SCG Lightning, BUELL XB12S Lightning, BUELL XB12R Firebolt, BUELL XB12 STT Lightning
OEM Equivalent Product?
It was incompatible with my XB12, which I replaced with Radial master, and the VD?JL series did not give me the desired braking power at all!
It's dangerous, so even though it's more aggressive to DISC, I'd use a Pad with more braking power.
View detail
Fits: YAMAHA XTZ750 Super Tenere, YAMAHA XTZ750 Super Tenere, YAMAHA TZR50R, YAMAHA TZR50, YAMAHA TZR50, YAMAHA TZR50, YAMAHA TZM50R, YAMAHA TZR50, TRIUMPH Trophy, TRIUMPH Trident, TRIUMPH Bonneville, TRIUMPH Tiger., SUZUKI Skywave 250 Type S, SUZUKI Skywave Type I, SUZUKI Skywave 250 Type S, SUZUKI Skywave 250, SUZUKI Skywave 250 Type S, SUZUKI DR800S Big, SUZUKI DR800 St Big, SUZUKI DR800S Big
Perfect braking power and life
It's not in LineUp but I used it for Ninja150RR.
I think the thickest 2JL would have dragged and interfered.
Because the original Brake has a weak braking force, it is not enough for Speed to be produced.
I was often scared because it didn't slow down that much when I held Lever.
After replacing the pad, the braking force has been increased so that the car can decelerate as firmly as I grip it.
As for the Life, the grooves went away around 18000km and the Vibration came on just before I stopped.
I'm sure I'll be repeating with another replacement soon.
View detail