ACERBISFENDER

I was worried about the fitting with the light cowl on my XT250X, but it fits well.

The overall length is not much different from the OEM Product, so it has been extended backward, but there is no contact with the Frame. View detail

To crf250l md47!

Purchased for MOTARD for crf250l!
The Instruction Manual was the English version, but if you measure the OEM holes, you can easily work with the Seal that serves as a marker for drilling holes!
The color is a little different but well, I am satisfied!
The back fender interfered a little with the body of the car, so I installed a 5mm washer! View detail

Good linear design

Drilling is required for Universal Product.
A drilling Guide Template is included in the package and is specified for each car model.
Since the Template is a Seal, paste it into the Fender as it is. In this case, there is a form on the Fender side that tells you to paste it here, so follow it.
Then, drilling was done with Drill to complete the process.
I was worried that the holes might actually be gapped because it is an overseas manufacturer. So I traced the position of the holes on the Fender that came with the car and tried to match them to the Template, and found that they were almost the same, so I believe the Template that came with the car is large and strong enough for my model.
It is also lightweight, so it is supposed to make turning around much easier. However, when driving in the dirt or in the rain, it makes no sense at all, so we think it is safer to return to normal fender. View detail

Now that we have a Number Plate

I use it on my WR250X
I switched from OEM to this one because I changed to Number Plate.

The front fender of the WR250X has a hole that attaches to the headlight cowl.
If you convert it to a Number Plate and remove the headlight cowl, the hole will be exposed.
As I value my looks, I could not allow that to happen, so I decided to replace it and chose this one.

This is a Universal Product and requires drilling. If you want to make a clean hole, drilling is recommended.

It is shorter than OEM and more MOTARD-like, but because it is shorter, water from the road surface will fly off when it rains.
You have to be prepared for conflicts between good looks and convenience, but it's cool, so I'm satisfied. View detail

ACERBIS Super motard front fender

I think the product is solid and well made, but the moment I opened the bag, it was not as glossy as the other company's parts. It was the worst.
Can you return these things? LOL! View detail

Easy to drill

Just a good Length seems to be less shaky.
Although attached to the XR 650 R, the position is easy to match with the attached paper, but when using OEM Color of 650 the OEM is thicker in the Plastic part of the mounting part, so in this Fender color length is left, so separately Washer If you do not put Spacer you will not be able to clean up like an OEM View detail

It is necessary to drill - - - -

Shorter than OEM's long Fender, Image changed.
XR250 MOTARD had no description of hole size, but Honda car was the same drilling Pitch so it was okay to drill with that, but just to make sure I removed OEM's Fender and drilled with Drill after confirmation.

View detail

Easy Custom

I use it for DR - Z 400SM.

Electric Drill is required for drilling.
Mounting positioning is no problem at all. I think that you can purchase with confidence.

It seems that it affects driving though it is a feeling degree.

This time I tried to write a review unusually because the shipping speed of Webbuk and the free shipping service were large thanks to Large change.

Purchase Wye Big is definitely profitable. View detail

MOTARDSpec. In!

NORMAL's Front fender was too long and I really did not like the feeling of MotocrossMotorcycle so I found this product as a result of various searches. After installing Seal for attachment attachment from the attachment, type (Us XR 650 R) You can install it if you drill a hole in the installation Pitch.
It was perfect if it matched only the color. View detail

MOTARDSpec. The necessities of?

XR 650 R with MOTARDSpec. Although I made it, Normal fender was not able to receive anything so I was looking for various things, but I finally found it. Also attach the Seal for attaching holes to the Fender and the dimensions of the XR 650 R are written so open the hole as it is 10. I finished it with 5 mm Drill and attached it with Normal fender's Color attached.
Although the color is somewhat thin, Material : It's a Plastic item so it can not be helped.. Looks is very satisfying and satisfying. View detail

Makeover

Because I wanted to make it look like Off-road, I removed this existing Fender and attached this Fender. Since holes were made to be able to know the position to be opened by Manufacturer, we opened 4 places and stopped with Size's matching Bolt. It took almost no trouble. I feel fresh by changing Image.
I wanted to make five stars, but because the color was a bit of White of Blue series, I was wondering whether the painting painted on Pure white with Spray of Pura Color before installing is one star Minus? View detail

Front fender exchange

I also liked OEM's Front fender, but since I thought ACERBISSuper motard front fender was Cool, I exchanged it.
For installation, holes for mounting are not opened, so it is necessary to drill, but since Seal with dedicated grid is attached, positioning is easy and you can drill if there is only Drill. (I failed and opened two holes separately from the mounting holes. Once installed it will disappear. )

Although it is the installation to WR 250X, since it will create a gap with Headlight cowl only by replacing Fender, we moved Headlight cowl down and installed it.
I do not know in the image, but it looks really different from the OEM's White because it's completely different color..
It is unavoidable that the color is different because of the Universal Product, but I made the evaluation four stars. View detail

Form is sharp and smart. Although the color was a White, the color a little appropriate for a light blue was regrettable.

Form is sharp and smart. Although the color was a White, the color a little appropriate for a light blue was regrettable. View detail

Since the position of a hole changes with vehicle types the Design in which structure is solid is [ vehicle types ] also a Cool. [ which must attach by itself according to a Motorcycle, and must make the hole of business although I attached to CR

Since the position of a hole changes with

vehicle types the Design in which structure is solid is [ vehicle types ] also a Cool. [ which must attach by itself according to a Motorcycle, and must make the hole of business although I attached to CRM ] [
] If this to which the
Seal containing a grid is attached is stuck, most vehicle types so that the position in which the
hole is made may be known. it changes --
--
in which I made the hole by the Cordless drill by gauging --
which any problem does not have and was able to be attached finely -- since it is very pleasing, it has by two different colors.
The red Fender of the
photograph is raised 5 cm, is attached, and there is. Affinity with a Front number is also one article of the
Recommendation in an Exactly. View detail

It was charmed by form and has attached to the MOTARD. Although the BALI etc. were in the fine place with overseas products, it is satisfied in general. attachment requires a drilling process according to a vehicle type.

It was charmed by form and has attached to the MOTARD. Although the BALI etc. were in the fine place with

overseas products, it is satisfied in general.
attachment requires a drilling process according to a vehicle type. View detail

The color and the form became a Forme appropriate for a MOTARD after satisfaction ♪wearing.

The color and the form became a Forme appropriate for a MOTARD after satisfaction ♪
wearing. View detail

Although attached to the DJEBEL250 XC, I think that it is so comfortable. Since the atmosphere of a Motorcycle changes only by carrying out Front-fender exchange, it is recommended. Although the fender effect in a path through a wood is an unknown --

Although attached to the DJEBEL250 XC, I think that it is so comfortable. Since the atmosphere of a Motorcycle changes only by carrying out Front-fender exchange, it is recommended. Although the fender effect in a path through a wood is an unknown -- View detail

D-Tracker was equipped. Since it is a general-purpose article, the mounting hole is not opened. Compared with the pure fender which was slow in action, it became sharply and smart. I think that it is a product good for ? image change whether a

D-Tracker was equipped.
Since it is a general-purpose article, the mounting hole is not opened.
Compared with the pure fender which was slow in action, it became sharply and smart.
I think that it is a product good for ? image change whether a cooling effect rises in case of an air cooling motorcycle since a wind hits an engine in the hole of the fender rear. View detail

Although the small fender was lovely to KSR and he liked it to it, since there is a problem in the tricks with water in case of rainy weather, the goods here are purchased by a heart-breaking grief. It was attached without inclining, since drilling wa

Although the small fender was lovely to KSR and he liked it to it, since there is a problem in the tricks with water in case of rainy weather, the goods here are purchased by a heart-breaking grief.
It was attached without inclining, since drilling was uneasy since it was a general-purpose article, but the seal to which the scale was attached was attachment.
It will still be satisfactory, since it is [ 10 mm or more of pure twists ] long, although it is not running in case of rainy weather.
The figure of KSR is not broken down to there but the water which also wound up the rainy day is prevented (since it is not running, it is still anticipation), and moreover, since it is the amount of money of 1/2~1/3 of a down fender, in me, they are recommend goods. View detail

In order to take out the further motard machine-likeness, it attached to DR-Z400SM. Since it is the elaborate design, the image-change effect is high! I think that it is easy to take out a hand since the price is also held down. Since it was a

In order to take out the further motard machine-likeness, it attached to DR-Z400SM.
Since it is the elaborate design, the image-change effect is high!
I think that it is easy to take out a hand since the price is also held down.
Since it was a general-purpose article, the mounting hole needed to be made according to the vehicle type, but since the description and grid seal in which the drilling location of the typical vehicle type was written were attached, it was easy to decide a location.
Although the bali at the time of molding remains in the portion of the edge, since it can process easily with a cutter etc., I regard some as not so much worrisome.
How about attaching [ those who have got bored with the looks of normal ] to a trial? View detail