Reviews
OEM compatible Sprocket
BANDIT1250 F total mileage 85750km,Recently, I was concerned because the Chain was making a clattering noise.
Since I am a novice mechanic, I enjoyed replacing bearings and tires by trial and error, but when I inspected the front sprocket, I realized it was time to replace it. So I went to Webig and searched for parts and found OEM products and interchangeable parts. After considering how long I would be driving the car, I decided to go with the interchangeable parts.
To replace it, we had to have more Socket on hand, but we replaced it successfully and immediately ran a TEST run.
As I thought, the noise of the Chain disappeared and it became quiet and smooth. I will be able to go out for touring this Season with peace of mind.
View detail
NTBSprocket
I purchased this product because the one I had been using was on the verge of being damaged.
I still have to see how durable it is, but I think it will be fine as long as it is an OEM Equivalent Product.
I was relieved to receive the order the next day and was able to exchange it right away.
View detail
R1-ZSprocket
I was worried about compatibility since it is not an OEM Product, but it came on perfectly. View detail
Fits: YAMAHA Virago (VIRAGO), YAMAHA Virago (VIRAGO), YAMAHA Virago (VIRAGO), YAMAHA Virago (VIRAGO), YAMAHA Renaissa (RENAISSA), YAMAHA Renaissa (RENAISSA), YAMAHA Renaissa (RENAISSA), YAMAHA Virago (VIRAGO), YAMAHA Virago (VIRAGO), YAMAHA Virago (VIRAGO), YAMAHA Virago (VIRAGO), YAMAHA Virago (VIRAGO)
VIRAGO250 Rear Sprocket
Replaced OEMRear Sprocket.
It is inexpensive, but it is made with confidence.
View detail
To YamahaSEROW.
I bought it to use for SEROW, but I couldn't use it for Initial Model. I could not use it due to lack of confirmation, but I'm glad I could use it for my friend's SEROW. View detail
Mounted on ESTRELLA2014
I learned that the OEM of ESTRELLA2014MODEL is 40 guns, but the previous ESTRELLA was 38 guns, and since it was time to replace them, I replaced them.
When I compared the parts list between the 2014 model and the applicable car model, the rear hub looked the same shape and the part number was the same, so I thought it would work and bought it.
However, since the reduction of two fingers caused the Chain to loosen, we shifted the Axle Shaft position by 2 ticks of 10mm to pull it backward.
I thought this was a good idea, although I felt that acceleration was slower, it took more force to turn the Tire, and Smoothness was lost a little.
The SHIFT UP timings are now about 2 beats slower than before, which makes the ride more enjoyable.
I haven't been able to take it on the highway yet, so I've only taken it up to a maximum speed of 60 km/h. I can hardly tell the difference in 5th gear×4000 rpm = about 60 km/h, so I have the impression that I'm getting more fun in the low speed range.
View detail
The quality is appropriate for the price, but I expect durability.
[How is it used?
Since we wanted to change the number of Sprocket pins on the ESTRELLA and the Chain that was attached to it had deteriorated, we decided to take this opportunity to replace the front and rear Sprocket and Chain at the same time.
ESTRELLARear Sprocket was only available in the same size as OEM from all manufacturers, and the only way to change the GEAR ratio was to adjust the Front. Therefore, the Rear Sprocket is not that important, so we chose NTB because it is cheap and we can expect durability in terms of material.
Was the one you received as per Image?
The color is silver, the same as OEM. However, the machining accuracy is commensurate with the price, and there are scratches like dents on the surface, and the corners of the teeth have rough surfaces as if they were left uncut.
I'm not that concerned about it since my use is for commuting Main city driving, but it might bother some people.
Was the installation difficult?
If you can remove the Rear wheel and remove the Nut from the hub, you can do the replacement work yourself. ESTRELLA is especially good because it has a center stand, so you can do the work without a maintenance stand.
As a side note, if you are replacing the Chain or Sprocket at their wear limit, I would recommend replacing the Hub damper together. I was concerned that the hub damper was too thin and the hub was rattling when I replaced it, but I forgot to prepare the hub damper.
How was your experience with it?
It works fine as a Sprocket. The color matches the silver color of the surrounding plating parts and rim.
[Included Parts:were they on?
Only SprocketBody.
[Was there anything that disappointed you?
Although in line with the price, the machining accuracy is not that good.
Other items that would be helpful
Installation points and hang/Availability and clarity of the Instruction Manual/Points to consider/Items to purchase/Opinions and requests to the Manufacturer
View detail
We have substituted OEM Product.
I have not driven that many miles, but I have used it without any problems. View detail
the best Quality
Quality product,corresponds to the specifications of carefully worked very easy and fast purchase Fast dellivery without payment additional 10 days from \japan to Romania iwill definitely be o loyal customer Thank you View detail
Fits: SUZUKI 4Cycles Bridie 80 (for Cycle BIRDIE), SUZUKI 4Cycles Bridie 80 (for Cycle BIRDIE), SUZUKI 4Cycles Bridie 80 (for Cycle BIRDIE), SUZUKI 4Cycles Bridie 80 (for Cycle BIRDIE), SUZUKI 4Cycles Bridie 80 (for Cycle BIRDIE), SUZUKI 4Cycles Bridie 80 (for Cycle BIRDIE), SUZUKI 4Cycles Bridie 80 (for Cycle BIRDIE), SUZUKI 4Cycles Bridie 80 (for Cycle BIRDIE), SUZUKI 4Cycles Bridie 80 (for Cycle BIRDIE), SUZUKI Bridie Post (BIRDIE), SUZUKI Bridie Post (BIRDIE), SUZUKI Bridie Post (BIRDIE), SUZUKI Bridie Post (BIRDIE)
Used for VANVAN90
It was for BIRDIE 80 and 90, but it could be used for VANVAN 90 as per the information.
This makes F15T/R33 Ding, but it is a little too high gear, so 14T may be better for Front.
Body is Beauty with Chromium Plating, but it is a little noticeable.
View detail
For durability, Steel is still the way to go.
The aluminum rear sprocket looks good, but it is not durable. I am looking for durability rather than looks, so I replaced it with a steel sprocket, which is lighter than the OEMSprocket. View detail
Trust is Steel.
OEM compatible, OEM same etc. quality.
Aluminum is certainly lighter and looks better, though. Steel is more durable.
Considering this, the cosmetics market is dominated by this product.
good point
OEM quality and performance.
High durability.
High cost performance.
●Front, so replacement is easy.
I don't think that OEM is the best choice for everything, but for parts that require durability, such as Sprocket and Chain, I think OEM or OEM-alike parts are better.
Manufacturers use those parts for their durability.
View detail
A little heavy, but cheap as hell!
[How is it used?
I bought this product because it was cheap enough to build a spare wheel from used parts.
How was your experience with it?
It is obviously heavier than the high-end Duralumin products.
However, if you play in the mountains, you won't feel the demerit of being heavy, so it is a sufficient product for me Level riders.
How did it compare to other products?
The prices are so different that I don't know how to compare them...
It looks like "Cheap Iron Sprocket." The design is as it is, so I don't think people who want to dress-up will be able to compare their purchase from the beginning.
If you have your heart set on saving weight... "Iron Sprocket not aggressive about meat removal." I don't think this is another purchase comparison as it looks just the same.
But I think the fact that it's still being lined up means there's a demand for it (maybe there's a certain amount of people like me who buy it).
I don't think you can complain about cheapness & durability.
[Points to note]
Functionally, there are no Points to note, but if you are discovered by someone who is mounting anything "What's this? What's with this cheesy Sprocket?" What a mouthful... I don't think there's anyone like that in the world...
For those who don't care, it doesn't matter.
0Other items that may be useful include
【Included Parts:presence or absence】.
None Sprocket only, you can reuse the Bolt that came with it or order an OEM Bolt.
[ITEMS TO BUY TOGETHER
The Sprocket that I used to use is Worn out and replaced. I think Chain has reached the end of its life if it was
Let's replace it with a new one and Refresh the drive system.
[Opinions and requests to Manufacturer
Keep making them as long as you can.
View detail
Fits: SUZUKI Grass Tracker (Glass TRACKER), SUZUKI Grass Tracker (Glass TRACKER), SUZUKI Grass Tracker (Glass TRACKER), SUZUKI Grass Tracker (Glass TRACKER), SUZUKI Grass Tracker (GRASS TRACKER), SUZUKI Grass Tracker BIGBOY (Glass TRACKER Big Boy), SUZUKI Grass Tracker BIGBOY (Glass TRACKER Big Boy), SUZUKI Grass Tracker BIGBOY (Glass TRACKER Big Boy), SUZUKI Grass Tracker BIGBOY (GRASS TRACKER Big Boy/GRASS TRACKER Big Boy 10th Anniversary MODEL), SUZUKI Intruder LC250 (INTRUDER), SUZUKI ST250, SUZUKI ST250, SUZUKI Volty typeC, SUZUKI Volty typeI, SUZUKI Volty typeI (VOLTY Type1), SUZUKI Volty typeT, SUZUKI Volty Type T (Volty Type T), SUZUKI Volty Type T (Volty Type T)
Suzuki grass tracker big boy
I did not expect that there would be such mega-fast delivery via FEDEX (I chose express): I placed an order for 4 parts on 10/30/21, received it on 11/11/21 (I live in the Urals). I figured it out on my own star - the seat is the same. Unlike the native star, the profile of this star itself is simpler (it is even, you can see it yourself from the photo). I will install in the spring together with a driven sprocket, chain and oil filter, which I also ordered on webike.com ------------------------------ ---------------------------- I did not expect that mega-fast delivery through FedEx (chose Express): An order for 4 details was issued on 10/30/21, I received 11.11.21 (I live in the Urals). I figured the native star - the landing place coincides. Unlike the native star, the profile of this star is easier (he is even, they see it yourself). I will put spring together with a slave star, chain and an oil filter that also ordered on webike.com View detail
Fits: SUZUKI Grass Tracker BIGBOY (Glass TRACKER Big Boy), SUZUKI Grass Tracker BIGBOY (Glass TRACKER Big Boy), SUZUKI Grass Tracker BIGBOY (Glass TRACKER Big Boy), SUZUKI ST250, SUZUKI ST250, SUZUKI Grass Tracker BIGBOY (GRASS TRACKER Big Boy/GRASS TRACKER Big Boy 10th Anniversary MODEL)
Driven star for Suzuki grasstracker big boy
In Russia, I did not find a driven star for the Suzuki grasstracker big boy (JT is sold only for a regular grasik, there are 41 teeth). I did not expect that there would be such mega-fast delivery via FEDEX (I chose express): I placed an order for 4 parts on 10/30/21, received it on 11/11/21 (I live in the Urals). I figured out my own star - the central and mounting holes match. I will install in the spring together with a sprocket, chain and oil filter, which I also ordered on webike.com ------------------------------ ---------------------------- In Russia, for Suzuki Grasstracker Big Boy, the slave star did not find (JT is only for sale on the usual grace, there are 41 tooth). I did not expect that mega-fast delivery through FedEx (chose Express): An order for 4 details was issued on 10.30.21, I received 11.11.21 (I live in the Urals). I figured the native star - the central and fastening holes coincide. I will put spring along with the lead star, chain and oil filter that also ordered on webike.com View detail
Purchased by mistake.
I bought the wrong model for my car.
Everyone should be very careful with their purchases.
I have been using SUNSTAR for my Sprocket and Brake rotor since I started riding Motorcycle.
They are a little more expensive than OEM Parts, but I think they are more reliable.
View detail
Purchased by mistake.
I bought the wrong model for my car.
I think the thing itself is good.
View detail
I bought it by mistake.
I was going to put it on my D Tracker 125 but for some reason I bought this product which doesn't fit.
It was completely my mistake, so I will be careful afterwards.
View detail
It's made of steel.
In our shop you will find Material:They seem to be putting a lot of effort into selling Aluminum, but it only lasts about 5000km.
After all, the most durable iron is the best.
Shop is not actively trying to sell ironwork, so it takes days to order it.
It is advisable to order early in advance.
We were very fortunate to have one of the few Manufactures that produced the iron Sprocket for us.
View detail
Fits: HONDA SUPER CUB 50 PRO, HONDA SUPER CUB 50 60th Anniversary/STREET, HONDA SUPER CUB 50, HONDA CROSS CUB50, HONDA CROSS CUB50, HONDA SUPER CUB 50 STD (SUPER CUB), HONDA SUPER CUB 50 STD (SUPER CUB), HONDA PRESS CUB 50 STD (CUB PRESS), HONDA PRESS CUB 50 STD (CUB PRESS), HONDA PRESS CUB 50 STD (CUB PRESS), HONDA PRESS CUB 50 DX (CUB PRESS), HONDA PRESS CUB 50 DX (CUB PRESS), HONDA PRESS CUB 50 DX (CUB PRESS), HONDA PRESS CUB 50 (CUB PRESS), HONDA PRESS CUB 50 (CUB PRESS), HONDA PRESS CUB 50 (CUB PRESS), HONDA PRESS CUB 50 (CUB PRESS), HONDA PRESS CUB 50 (CUB PRESS), HONDA PRESS CUB 50 (CUB PRESS), HONDA PRESS CUB 50 (CUB PRESS)
Drive sprocket for Honda Super Cub 50 (AA04)
The quality of the star is fire! After all, it will last much longer than the Chinese one. In the city of Barnaul, I visited probably 20 stores and no one could help ordering stars and a chain for a Honda Super Cub 50 (AA04) scooter. I searched the Internet, found this site, then read the reviews (and they were contradictory and some disappointing). When ordering, you can see how much the remainder is - and where a few pieces in total in the remainder were not considered. According to reviews - delivery to the addressee in Russia - 2 months. Delivery to Barnaul is 50 days. Dispatched the next day after payment. the track was tracked for 2 days to the port, then a month of silence. Then from Vladivostok I went by train to Moscow for 2 weeks and a week to Barnaul. I did not put it yet, I took it in reserve. -------------------------------------------------- -------- The quality of the star is fire! After all, it will last much longer than the Chinese. In the city of Barnaul went through probably 20 stores and no one could help me order sprockets and chains on my Honda Super Cub 50 (AA04) scooter. I scoured the internet, found this site, then read the reviews (and they were contradictory and some disappointing). When ordering, you can see how much is left - and where a few pieces of everything in the remainder did not consider. According to reviews, delivery to the addressee in Russia - 2 months. To Barnaul delivery 50 days. Sent the next day after payment. Tracked for 2 days to the port, then a month of silence. Then from Vladivostok went by train to Moscow for 2 weeks and a week to Barnaul. I haven't put it in yet, I took it as a spare. Powered by www.DeepL.com/Translator View detail